xf86-video-intel: configure.ac NEWS

[Chris Wilson]

 NEWS         |   39 +++++++++++++++++++++++++++++++++++++++
 configure.ac |    2 +-
 2 files changed, 40 insertions(+), 1 deletion(-)

New commits:
commit a467102a9539c7f4fa8d0700ecdcaba49d77b3f7
Author: Chris Wilson <chris at chris-wilson.co.uk>
Date:   Sat Dec 15 10:00:48 2012 +0000

    2.20.16 release
    
    Signed-off-by: Chris Wilson <chris at chris-wilson.co.uk>

diff --git a/NEWS b/NEWS
index 2809dcb..36c81d7 100644
--- a/NEWS
+++ b/NEWS
@@ -1,3 +1,42 @@
+Release 2.20.16 (2012-12-15)
+============================
+Rejoice! We have found a trick to make 830gm/845g stable at long last.
+Ever since the switch to GEM and dynamic video memory, those early
+second generation chipsets have been plagued by instability. The lack of
+flushing cachelines from the CPU to GMCH was eventually solved by using
+an undocmented bit, but 830/845 were still hanging under memory pressure.
+These deaths were all due to garbage finding its way into the command
+streamer, and they go away if we take a leaf out of the original driver
+and never reuse those pages for anything else. So for the first time
+ever, I have been able to complete running the test suite on an 845g,
+even whilst thrashing the page and buffer caches!
+
+ * Run the SF stage as single-threaded on gen4 to workaround a few issues
+   https://bugs.freedesktop.org/show_bug.cgi?id=57410
+
+ * Keep the scanout SURFACE_STATE separate to avoid overriding its
+   memory access control on gen6/7 (i.e. writes to the scanout need to
+   be kept out of the render cache)
+
+ * Tune batch flushing after an operation to an exported surface under a
+   compositor.
+
+ * Make sure the source is on the CPU for inplace composition of trapezoids
+   using the CPU
+   https://bugs.freedesktop.org/show_bug.cgi?id=56825
+
+ * Immediately flush in the block hander after a split batch to reduce
+   latency between the two halves of an operation.
+   https://bugs.freedesktop.org/show_bug.cgi?id=51718
+
+ * Install a fallback config if we fail to install the desired config
+   at VT switch (i.e. booting, after resume with 3 incompatible pipes on
+   Ivybridge)
+
+ * Pin batches to avoid CS incoherence on 830/845
+   https://bugs.freedesktop.org/show_bug.cgi?id=26345
+
+
 Release 2.20.15 (2012-12-03)
 ============================
 And lo, enabling more of the common acceleration paths for gen4 revealed
diff --git a/configure.ac b/configure.ac
index 8ada660..9354437 100644
--- a/configure.ac
+++ b/configure.ac
@@ -23,7 +23,7 @@
 # Initialize Autoconf
 AC_PREREQ([2.60])
 AC_INIT([xf86-video-intel],
-        [2.20.15],
+        [2.20.16],
         [https://bugs.freedesktop.org/enter_bug.cgi?product=xorg],
         [xf86-video-intel])
 AC_CONFIG_SRCDIR([Makefile.am])