xf86-video-vmware: Changes to 'master'
Thomas Hellstrom
thomash at kemper.freedesktop.org
Mon Dec 19 11:31:45 PST 2011
Makefile.am | 2
configure.ac | 35
saa/Makefile.am | 13
saa/saa.c | 748 +++++++++++++++++
saa/saa.h | 209 ++++
saa/saa_accel.c | 153 +++
saa/saa_pixmap.c | 222 +++++
saa/saa_priv.h | 279 ++++++
saa/saa_render.c | 424 ++++++++++
saa/saa_unaccel.c | 935 ++++++++++++++++++++++
src/Makefile.am | 27
src/svga_reg.h | 1401 +++++++++++++++++++++++++--------
src/vmware.c | 547 -------------
src/vmware_bootstrap.c | 503 ++++++++++++
src/vmware_bootstrap.h | 59 +
src/vmware_common.c | 163 +++
src/vmware_common.h | 41
src/vmwaremodule.c | 256 ------
vmwgfx/Makefile.am | 26
vmwgfx/svga3d_reg.h | 1801 +++++++++++++++++++++++++++++++++++++++++++
vmwgfx/vmwgfx_crtc.c | 455 ++++++++++
vmwgfx/vmwgfx_ctrl.c | 523 ++++++++++++
vmwgfx/vmwgfx_ctrl.h | 48 +
vmwgfx/vmwgfx_dri2.c | 426 ++++++++++
vmwgfx/vmwgfx_driver.c | 1200 ++++++++++++++++++++++++++++
vmwgfx/vmwgfx_driver.h | 186 ++++
vmwgfx/vmwgfx_drm.h | 792 ++++++++++++++++++
vmwgfx/vmwgfx_drmi.c | 502 +++++++++++
vmwgfx/vmwgfx_drmi.h | 87 ++
vmwgfx/vmwgfx_output.c | 393 +++++++++
vmwgfx/vmwgfx_overlay.c | 893 +++++++++++++++++++++
vmwgfx/vmwgfx_saa.c | 1514 ++++++++++++++++++++++++++++++++++++
vmwgfx/vmwgfx_saa.h | 110 ++
vmwgfx/vmwgfx_saa_priv.h | 125 ++
vmwgfx/vmwgfx_tex_video.c | 855 ++++++++++++++++++++
vmwgfx/vmwgfx_xa_composite.c | 277 ++++++
vmwgfx/vmwgfx_xa_surface.c | 368 ++++++++
vmwgfx/wsbm_util.h | 79 +
38 files changed, 15532 insertions(+), 1145 deletions(-)
New commits:
commit b5546fb1de3f3859151a91e98ab0bd24b6789e2e
Merge: abf9cb75630cb27bb4741d194cb23014fe3d09b1 5748c33535bc7d3009b9758653885e6ae0e73002
Author: Thomas Hellstrom <thellstrom at vmware.com>
Date: Mon Dec 19 20:25:43 2011 +0100
Merge branch 'vmwgfx_branch'
commit 5748c33535bc7d3009b9758653885e6ae0e73002
Author: Thomas Hellstrom <thellstrom at vmware.com>
Date: Wed Dec 14 12:38:27 2011 +0100
saa, vmwgfx: Fix saa_copy_composite
The traditional accelerated copy methods aren't format aware.
Make saa copy format aware,and pass formats on to the driver copy function
if available. If the driver can't handle format conversions it needs to
return FALSE.
This fixes format confusion in the copy composite fastpath.
Signed-off-by: Thomas Hellstrom <thellstrom at vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob at vmware.com>
commit f664e31d73bd31594e069d8bcca872687b84d8d9
Author: Thomas Hellstrom <thellstrom at vmware.com>
Date: Wed Dec 14 10:22:22 2011 +0100
saa: Always read back hw contents on poly_fill_rect
The damage region may be much larger than the actual area
filled, so make sure we read back any hw contents in the damage region
since we use it to mark sw dirty.
Revisit this in the future since it may increase readbacks in an
undesired way. There are workarounds.
Signed-off-by: Thomas Hellstrom <thellstrom at vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob at vmware.com>
commit 0eef22437093d29f572abea845fff9c03fca5e4e
Author: Thomas Hellstrom <thellstrom at vmware.com>
Date: Wed Dec 14 10:18:16 2011 +0100
saa: Only try to accelerate pixmaps that are driver pixmaps
Trying to accelerate scratch pixmaps doesn't work currently,
and I'm not sure it's a big benefit either.
This is in line with what EXA does.
Signed-off-by: Thomas Hellstrom <thellstrom at vmware.com>
Reviewed-by: Jakob Bornecrants <jakob at vmware.com>
commit afd2f828b8a8b2ccc6ebe4d56104db3d03d08493
Author: Thomas Hellstrom <thellstrom at vmware.com>
Date: Thu Dec 8 13:14:57 2011 +0100
vmwgfx: Reduce system resource usage with textured video
Use U and V textures and corresponding dma buffers that match
the size of the input UV data rather than using textures and DMA buffers
that match the Y data. This simplifies data copy and reduces the amount of
image data transfered to the host by up to 50% (YV12).
It also reduces dma buffer- and surface memory usage correspondingly.
Signed-off-by: Thomas Hellstrom <thellstrom at vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob at vmware.com>
commit 121dba0093d24eb0aefa3d27a22f05f85ac66f72
Author: Thomas Hellstrom <thellstrom at vmware.com>
Date: Wed Dec 7 20:19:34 2011 +0100
vmwgfx: Hook up XV color conversion control attributes
This enables the standard XV color conversion control attributes
contrast, scaling, saturation and hue.
Currently the attribute change takes effect on the next image only.
If we ever implement a ReputImage callback, we can use it to update
the image immediately on attribute change.
The attribute ranges follow those used by the proprietary Nvidia driver.
Signed-off-by: Thomas Hellstrom <thellstrom at vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob at vmware.com>
commit 8bdc6004d34e274d815bb3f3e0aa223085ea848c
Author: Thomas Hellstrom <thellstrom at vmware.com>
Date: Wed Dec 7 14:17:45 2011 +0100
vmwgfx: Adapt to new interface of xa_yuv_planar_blit
Also make it easier to modify the color conversion matrix based on
yuv encoding properties.
Signed-off-by: Thomas Hellstrom <thellstrom at vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob at vmware.com>
commit dba7b865d36ebe06b54987176b1a83cdbc2f846a
Author: Thomas Hellstrom <thellstrom at vmware.com>
Date: Tue Dec 6 10:00:00 2011 +0100
vmwgfx: Fix MessageType members that are incorrectly typed as Bool
Signed-off-by: Thomas Hellstrom <thellstrom at vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob at vmware.com>
commit 2c438ad8b82f47ac3252403052df16655184acbd
Author: Thomas Hellstrom <thellstrom at vmware.com>
Date: Tue Dec 6 09:53:16 2011 +0100
vmwgfx: Add an option to enable rendercheck mode
Rendercheck mode is used to enable acceleration of all supported composite
operations, regardless of the current data location. The mode is off by
default, but could be turned on to test the hardware composite operation
implementation. Due to excessive data migration, rendercheck mode will be
slow.
Signed-off-by: Thomas Hellstrom <thellstrom at vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob at vmware.com>
commit 1736a76246f0a0dab01f5a1066332168d34b2803
Author: Thomas Hellstrom <thellstrom at vmware.com>
Date: Tue Dec 6 09:21:25 2011 +0100
vmwgfx: Adapt to the dri state tracker sending depth instead of bpp
Signed-off-by: Thomas Hellstrom <thellstrom at vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob at vmware.com>
commit fb35176958bba2f86d6d466ccb7baadcff806512
Author: Thomas Hellstrom <thellstrom at vmware.com>
Date: Mon Dec 5 20:58:45 2011 +0100
vmwgfx: Don't register back buffers as "hw_is_dri2_fronts" v2
That is reserved for dri2 front or fake front pixmaps that need
immediate flushing of software contents to hardware.
Signed-off-by: Thomas Hellstrom <thellstrom at vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob at vmware.com>
commit 3c2486e05e98f2ff8f4e3d2633d91e14140a676e
Author: Jakob Bornecrantz <jakob at vmware.com>
Date: Thu Dec 1 16:47:41 2011 +0100
vmwgfx: Include drm.h from correct path
Reviewed-by: Thomas Hellstrom <thellstrom at vmware.com>
Signed-off-by: Jakob Bornecrantz <jakob at vmware.com>
commit 995d86ceb0ae8cf2904100405ba6710c89f7f1b7
Author: Thomas Hellstrom <thellstrom at vmware.com>
Date: Mon Nov 28 14:51:36 2011 +0100
vmwgfx: Make the drm device name persistent
The DRI2 code doesn't copy the device name, but assumes the storage
is persistent.
Signed-off-by: Thomas Hellstrom <thellstrom at vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob at vmware.com>
Reviewed-by: Alan Hourihane <alanh at vmware.com>
commit 08ca819238f2c2a0494b0bd8452393fc62907cc1
Author: Thomas Hellstrom <thellstrom at vmware.com>
Date: Fri Nov 25 14:38:45 2011 +0100
vmwgfx: Get the drm device name from the open file descriptor
Rather than hardcoding it.
Signed-off-by: Thomas Hellstrom <thellstrom at vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob at vmware.com>
commit d7576c2c50dd0f3b7f70f97d9bde4e8b859e89e5
Author: Thomas Hellstrom <thellstrom at vmware.com>
Date: Fri Nov 25 11:27:26 2011 +0100
vmwgfx: Use config options to optionally set GUI topology
Use option "StaticXinerama" or "GuiLayout" to set initial GUI topology,
similar to how these options are used with the legacy driver.
Signed-off-by: Thomas Hellstrom <thellstrom at vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob at vmware.com>
commit 22d3e58b8810a73c4818d4d3943776a387147b83
Author: Thomas Hellstrom <thellstrom at vmware.com>
Date: Wed Nov 23 11:02:00 2011 +0100
vmwlegacy: Factor out code that can be common for vmwgfx and vmwlegacy
In this case it's the parsing of the gui / statix xinerama topology.
Signed-off-by: Thomas Hellstrom <thellstrom at vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob at vmware.com>
commit 2e8aac7031a83f507169f6fe42924c51bdaf7326
Author: Thomas Hellstrom <thellstrom at vmware.com>
Date: Wed Nov 23 10:49:33 2011 +0100
vmwlegacy: Accept option "GuiLayout" as a synonym for "staticXinerama"
It's more user-friendly and in line with what it's being used for in the
vmwgfx driver.
Signed-off-by: Thomas Hellstrom <thellstrom at vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob at vmware.com>
commit 31e80b2a609631d85341025d7f2d0fb818f386f5
Author: Thomas Hellstrom <thellstrom at vmware.com>
Date: Fri Nov 25 09:42:16 2011 +0100
vmware: Update library dependencies
Signed-off-by: Thomas Hellstrom <thellstrom at vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob at vmware.com>
commit da29c648051208b98704860f851564a80bd3b123
Author: Thomas Hellstrom <thellstrom at vmware.com>
Date: Tue Nov 22 21:06:24 2011 +0100
vmwgfx: Pre-init fixes
A bunch of fixes that makes the fallback from vmwgfx to vmwlegacy easier.
1) Allow only 16 and 24 bit depths with vmwgfx. We may revisit this later.
2) Try to reclaim some resources if pre_init fails.
3) Print error messages so the user understands what happens on fallback.
Signed-off-by: Thomas Hellstrom <thellstrom at vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob at vmware.com>
commit e52b1505cfc4a7d0507e14c3b6335a9b9652c50f
Author: Thomas Hellstrom <thellstrom at vmware.com>
Date: Fri Nov 25 09:15:32 2011 +0100
vmware: Update the vmware register definition
Signed-off-by: Thomas Hellstrom <thellstrom at vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob at vmware.com>
commit 1c77e3d7434f04c59233ce7e497a949e386e1630
Author: Thomas Hellstrom <thellstrom at vmware.com>
Date: Tue Nov 22 19:56:20 2011 +0100
vmware: Hook up vmwgfx to be tried before falling back to legacy
Signed-off-by: Thomas Hellstrom <thellstrom at vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob at vmware.com>
commit 2aa256c96496ed6dd9dbd5880c278f4422500b0f
Author: Thomas Hellstrom <thellstrom at vmware.com>
Date: Tue Nov 22 18:37:44 2011 +0100
vmwlegacy: Factor out bootstrap functions
Preparing for choosing driver path in preinit instead of using
shim loader.
Signed-off-by: Thomas Hellstrom <thellstrom at vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob at vmware.com>
commit 70487eee975c63b5ed1492927bbc661425278276
Author: Thomas Hellstrom <thellstrom at vmware.com>
Date: Wed Nov 9 11:34:16 2011 +0100
vmwgfx: Make sure we don't render when VT switched
When compiz is enabled, we may try to DMA sw rendered contents of dri2
drawables to surfaces while VT switched. I'm not sure how this could be
happening, but queue the DMA until the next block handler.
Signed-off-by: Thomas Hellstrom <thellstrom at vmware.com>
Reviewed-by: Alan Hourihane <alanh at vmware.com>
commit e1810e0b09e07bdab05a57fdef74450a507e9dfa
Author: Thomas Hellstrom <thellstrom at vmware.com>
Date: Tue Nov 8 15:28:40 2011 +0100
vmwgfx: Fix rendering errors when rotating / unrotating a screen.
The dirty trackers weren't correctly translated to
pending presents / updates when a pixmap was bound as a scanout.
Signed-off-by: Thomas Hellstrom <thellstrom at vmware.com>
Reviewed-by: Jakob Bornecrants <jakob at vmware.com>
commit d0b493d67afd1b5e8c8397c7938752ecd56c91ba
Author: Thomas Hellstrom <thellstrom at vmware.com>
Date: Tue Nov 8 14:49:36 2011 +0100
vmwgfx: A number of damage fixes
A damage tracker was sometimes attached to a pixmap in the middle of an
operation. That meant that damage was never registered for that operation
which caused dirty-tracking to fail. Instead, add a damage tracker as
soon as we have storage attached to the pixmap.
Also, when a pixmap was resized, the dirty region trackers could become
stale, and cause DMA operation extending outside of the pixmap with
server crashes as a result. This commit fixes that.
Signed-off-by: Thomas Hellstrom <thellstrom at vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob at vmware.com>
commit aff799d007c8383321213ad177e5a9deec2b3978
Author: Thomas Hellstrom <thellstrom at vmware.com>
Date: Tue Nov 1 15:39:07 2011 +0100
vmwgfx: Add an option to use a scanout surface
With this option enabled, we compose all contents (both sw and hw) in
the guest before presenting it. Just like the old xorg state tracker did
when 3D was enabled. It's not as bad as the old xorg state tracker was for
interactivity, but there's a small but noticeable lag when moving windows.
It's mainly intended for testing purposes, like testing the surface
dirty paths in the kernel module.
Signed-off-by: Thomas Hellstrom <thellstrom at vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob at vmware.com>
commit 5137e8736edfab1aaebef4046baab37361584b2e
Author: Thomas Hellstrom <thellstrom at vmware.com>
Date: Tue Nov 1 09:59:18 2011 +0100
vmwgfx: Be correct when setting up damage tracking
When setting up damage tracking, previously the code would guess wether
sw or hw was currently dirty. The caller always have that information,
so pass it to the damage tracking setup function.
Signed-off-by: Thomas Hellstrom <thellstrom at vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob at vmware.com>
commit ed7bba3cda4b454eec771d3bf0ebed4fd998a82a
Author: Thomas Hellstrom <thellstrom at vmware.com>
Date: Tue Nov 1 08:38:52 2011 +0100
vmwgfx: Add an option for direct presents
With this option set to true, accelerated copies to a scanout pixmap will
be performed as hardware presents instead of copies to an intermediate
3D surface backing the scanout pixmap, followed by a present.
Depending on the application this might be a performance boost, but since
it might trigger device software readbacks in other situations, for example
dri2 copy front->fake_front, it might be a performance hog in other situations,
so disable it by default. (Before this commit it was enabled by default).
Signed-off-by: Thomas Hellstrom <thellstrom at vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob at vmware.com>
commit b2c4a7e682e14fa8af42415d429d6735117fefcb
Author: Thomas Hellstrom <thellstrom at vmware.com>
Date: Mon Oct 31 15:14:21 2011 +0100
vmwgfx: Fix acceleration options.
Introduce relevant acceleration options and fix up the log printout.
Signed-off-by: Thomas Hellstrom <thellstrom at vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob at vmware.com>
Reviewed-by: Alan Hourihane <alanh at vmware.com>
commit da85719e9e373ee8da53388cccc71a0f9c8bbefc
Author: Thomas Hellstrom <thellstrom at vmware.com>
Date: Mon Oct 31 14:40:55 2011 +0100
vmwgfx: Remove a couple of unused options
Signed-off-by: Thomas Hellstrom <thellstrom at vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob at vmware.com>
Reviewed-by: Alan Hourihane <alanh at vmware.com>
commit b6faecc7613e8c73f0681d20a1a80e5e0ddd4058
Author: Thomas Hellstrom <thellstrom at vmware.com>
Date: Mon Oct 31 14:27:29 2011 +0100
vmwgfx: Don't do present readbacks per crtc
The kernel now takes care of doing this the right way;
no need to duplicate that functionality.
Signed-off-by: Thomas Hellstrom <thellstrom at vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob at vmware.com>
commit cc7c1c961b77c139b95fbb6948204def1b4b908a
Author: Thomas Hellstrom <thellstrom at vmware.com>
Date: Mon Oct 31 10:50:09 2011 +0100
vmwgfx: Fall back to sw cursors if needed
If there is a risc that we need two simultaneous cursors,
(two outputs showing the same contents, at least one of them explicit),
fall back to sw cursor.
Signed-off-by: Thomas Hellstrom <thellstrom at vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob at vmware.com>
commit 427064b57c52c8881c7a64d9c9e21411e79e644b
Author: Thomas Hellstrom <thellstrom at vmware.com>
Date: Wed Oct 26 16:33:30 2011 +0200
vmwgfx: Fix crtc position of transformed fb
The fb allocated for transformed data always matches the scanout region,
so set the crtc origin to (0,0)
Signed-off-by: Thomas Hellstrom <thellstrom at vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob at vmware.com>
commit 55113dae7cbe99bfb69869831536ff34ed445c73
Author: Thomas Hellstrom <thellstrom at vmware.com>
Date: Wed Oct 26 15:08:18 2011 +0200
vmwgfx: Hook up vmwarectrl to the gui layout ioctl
Requires drm 2.3.
Signed-off-by: Thomas Hellstrom <thellstrom at vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob at vmware.com>
commit c73a7f3d991dd95d332829f2ca8a88aabfea5a46
Author: Thomas Hellstrom <thellstrom at vmware.com>
Date: Wed Oct 26 07:28:31 2011 +0200
vmwgfx: Update the connector type name array
Also map connector types that are not in the array to "Unknown".
Signed-off-by: Thomas Hellstrom <thellstrom at vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob at vmware.com>
commit a33710b0d16c9c01a1995b60f0b0d4d482f459d3
Author: Thomas Hellstrom <thellstrom at vmware.com>
Date: Fri Oct 21 11:19:36 2011 +0200
vmwgfx: Save the dri2 requested depth since it may differ from the drawable
depth.
Signed-off-by: Thomas Hellstrom <thellstrom at vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob at vmware.com>
commit 5c43481aa639053bbbf7fbf5f72f0edecf616731
Author: Thomas Hellstrom <thellstrom at vmware.com>
Date: Thu Sep 1 13:59:10 2011 +0200
vmwgfx: Adapt to vmwgfx kernel driver 2.1
This introduces fence objects with 2.0, and present / present readback
ioctls with 2.1.
Signed-off-by: Thomas Hellstrom <thellstrom at vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob at vmware.com>
commit 3c2f9cc43f7d36952e78d10d224da0ba68ecefea
Author: Thomas Hellstrom <thellstrom at vmware.com>
Date: Tue Aug 30 12:22:53 2011 +0200
vmwgfx-xorg: Avoid enabling unwanted outputs in initial configuration
Add a hack so that we avoid enabling all connected outputs during the
initial configuration. On older X servers they would be enabled as cloned,
which didn't really cause any problem, but on later X servers they would
initially be enabled next to eachother which looks odd.
A RandR call will still show the disabled outputs as connected, and if there
is a monitor section in the config file for the output in question,
it will also have a connected status, so that it may be explicitly enabled
or disabled from a config file.
Signed-off-by: Thomas Hellstrom <thellstrom at vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob at vmware.com>
commit f17abaa926fdbedab1e6236e109fa746fcc2320b
Author: Jakob Bornecrantz <jakob at vmware.com>
Date: Wed Jul 13 16:30:01 2011 +0100
vmwgfx: Just include vmwgfx_drm.h
We do this in mesa as well
Signed-off-by: Jakob Bornecrantz <jakob at vmware.com>
commit b29d71e3adb16f2a8e3e9d534bf8b1c1f8e0d9ef
Author: Jakob Bornecrantz <jakob at vmware.com>
Date: Wed Jul 13 16:28:52 2011 +0100
saa: Remove superflouos headers includes
Signed-off-by: Jakob Bornecrantz <jakob at vmware.com>
commit 98ff64fd7a13d2824d6f36b0d8f13d95f8be9e48
Author: Jakob Bornecrantz <jakob at vmware.com>
Date: Mon Jul 11 12:23:32 2011 +0100
vmwgfx: Fix logic when checking for XA
Signed-off-by: Jakob Bornecrantz <jakob at vmware.com>
commit 858dbcdddb35b690a543a103d43dcaeb040260c1
Author: Thomas Hellstrom <thellstrom at vmware.com>
Date: Sat Jul 9 22:54:41 2011 +0200
vmwgfx: Don't dirty the front buffer as hw when doing a dri2copyregion from it
When copying from a dri2 buffer we usually dirty it as hw, since dri has
been rendering to it, and there can only be hw contents in the buffer.
However for the real front, X has already done the dirty work for us.
Also remove a glxWaitX() debug message.
This should fix piglit read-front.
Signed-off-by: Thomas Hellstrom <thellstrom at vmware.com>
commit eea96a6f5ccc6a3a1e2bb2737f211076de443462
Author: Thomas Hellstrom <thellstrom at vmware.com>
Date: Thu Jul 7 22:02:15 2011 +0200
vmwgfx: Add boolean flags for different rendering modes
Basically we support three ways of getting data to the screen:
1) Mixed mode: We mix presents and updates.
2) Mixed present optimized: A version of mixed where copies to the front
buffer end up as presents, saving a blit.
3) 3D surface mode: We only present from a 3D surface. Software contents are
first DMA'd to that surface.
This change adds boolean flags to the saa struct to select which mode to use.
Signed-off-by: Thomas Hellstrom <thellstrom at vmware.com>
commit 9cff0a84308723d9790c6365c0d4b1c107794995
Author: Thomas Hellstrom <thellstrom at vmware.com>
Date: Thu Jul 7 09:21:56 2011 +0200
vmwgfx: Various acceleration fixes.
Signed-off-by: Thomas Hellstrom <thellstrom at vmware.com>
commit 81e7099b6bbd9fdae66a3186dfc3fff2758009cf
Author: Thomas Hellstrom <thellstrom at vmware.com>
Date: Fri Jul 1 13:23:30 2011 +0200
vmwgfx: Require libxatracker >= 0.4.
Signed-off-by: Thomas Hellstrom <thellstrom at vmware.com>
commit d2e27ee5c116cd914d98c2ffa4a974704c250be7
Author: Thomas Hellstrom <thellstrom at vmware.com>
Date: Fri Jul 1 12:29:50 2011 +0200
vmwgfx: Set up XA version checking.
Signed-off-by: Thomas Hellstrom <thellstrom at vmware.com>
commit 8a9997f060487c0aef07b8e8a95bb3a862de264f
Author: Thomas Hellstrom <thellstrom at vmware.com>
Date: Fri Jul 1 11:28:52 2011 +0200
vmwgfx: Try to sort out format handling with composite.
Try to catch all cases where we have to do readbacks or format conversions
due to composite formats not being compatible with ordinary accel formats.
Signed-off-by: Thomas Hellstrom <thellstrom at vmware.com>
commit 8a21da8eaa77bb1ec55ab8b5584554ae6cc41e1e
Author: Thomas Hellstrom <thellstrom at vmware.com>
Date: Wed Jun 22 22:26:20 2011 +0200
vmwgfx: Support xa composite.
Signed-off-by: Thomas Hellstrom <thellstrom at vmware.com>
commit c7e8388280fc047b33be4f603afa4b7615ffc585
Author: Thomas Hellstrom <thellstrom at vmware.com>
Date: Wed Jun 22 11:33:14 2011 +0200
saa: Add driver composite.
Signed-off-by: Thomas Hellstrom <thellstrom at vmware.com>
commit b2e116971031d1357f614e9ce1d843768489a304
Author: Thomas Hellstrom <thellstrom at vmware.com>
Date: Wed Jun 22 10:50:35 2011 +0200
saa: Reuse code for computing composite bounds.
Signed-off-by: Thomas Hellstrom <thellstrom at vmware.com>
commit 3650be74d5da602653b2b1d3cf3a6bb5a9cb3539
Author: Thomas Hellstrom <thellstrom at vmware.com>
Date: Tue Jun 21 00:13:32 2011 +0200
vmwgfx: Try to match created hardware formats with the dri state tracker.
commit 63d7ddb35fe8b6743de182b73e6967f97f6a7eba
Author: Thomas Hellstrom <thellstrom at vmware.com>
Date: Mon Jun 20 21:57:38 2011 +0200
vmwgfx: Fix dirty present bug
Clear dirty present areas when new contents are drawn to the backing
pixmap. Not when it is actually pushed to the screen.
Signed-off-by: Thomas Hellstrom <thellstrom at vmware.com>
commit f71928d3f78d9f9e5a0fd240069b9035d4ccac75
Author: Thomas Hellstrom <thellstrom at vmware.com>
Date: Mon Jun 20 21:48:23 2011 +0200
vmwgfx: Don't call xa_copy_done after a present.
Signed-off-by: Thomas Hellstrom <thellstrom at vmware.com>
commit 4d5aec4a7e4512145c76014591488cb5a98ff0ea
Author: Thomas Hellstrom <thellstrom at vmware.com>
Date: Mon Jun 20 14:13:46 2011 +0200
vmwgfx: Make present readbacks not cross scanout bounding box boundaries
Signed-off-by: Thomas Hellstrom <thellstrom at vmware.com>
commit f6a4690832143b01d419b52a4cb74350cdfa38bf
Author: Thomas Hellstrom <thellstrom at vmware.com>
Date: Mon Jun 20 09:58:44 2011 +0200
vmwgfx: Make a list of scanout bounding boxes available to each scanout pixmap
This info is needed for present readback.
Signed-off-by: Thomas Hellstrom <thellstrom at vmware.com>
commit eea0e6e242a604b1f4d85d947cf2b3f9f4977533
Author: Thomas Hellstrom <thellstrom at vmware.com>
Date: Mon Jun 20 09:05:48 2011 +0200
vmwgfx: Import the WSBM list macros
Use WSBM list handling macros for the glxWaitX flush list.
Signed-off-by: Thomas Hellstrom <thellstrom at vmware.com>
commit eabf82fad8ad72aab071cd4e3bc9063022b0aeb3
Author: Thomas Hellstrom <thellstrom at vmware.com>
Date: Fri Jun 17 11:25:53 2011 +0200
vmwgfx: Check for large files
Fixes segfault on 32-bit servers.
Signed-off-by: Thomas Hellstrom <thellstrom at vmware.com>
commit 7966dfa47c4d2b022ebf0f25a2db3901376e6cbd
Author: Thomas Hellstrom <thellstrom at vmware.com>
Date: Fri Jun 17 08:18:13 2011 +0200
vmwgfx, saa: Build saa as a convenience library
instead of as a shared object.
Signed-off-by: Thomas Hellstrom <thellstrom at vmware.com>
commit d28613e557fcdc4fc69f9a138a8c5fc909a719f5
Author: Thomas Hellstrom <thellstrom at vmware.com>
Date: Thu Jun 16 21:21:25 2011 +0200
vmwgfx: Fix up driver build process for Xserver >= 1.7.
Signed-off-by: Thomas Hellstrom <thellstrom at vmware.com>
commit 84166d4b457244bcc2f5ace63702d594d602d0c2
Author: Thomas Hellstrom <thellstrom at vmware.com>
Date: Thu Jun 16 15:55:07 2011 +0200
vmwgfx, saa: Initial import
This imports the vmwgfx driver, based on the Gallium3D Xorg state tracker,
as well as the saa library. A "Shadow Acceleration Architecture", which is
optimized for the case where transfers between system (shadow) and hw memory
is very costly.
Signed-off-by: Thomas Hellstrom <thellstrom at vmware.com>
More information about the xorg-commit
mailing list