xf86-video-intel: src/i830_display.c src/i830_driver.c

[Eric Anholt]

 src/i830_display.c |    4 ----
 src/i830_driver.c  |   25 -------------------------
 2 files changed, 29 deletions(-)

New commits:
commit 830bf916724afd21b7947f797c22a8c8aab7a0a4
Author: Eric Anholt <eric at anholt.net>
Date:   Mon Dec 29 13:42:44 2008 -0800

    Don't touch the pipestat regs for detecting FIFO underrun. The kernel owns them.
    
    Since we don't perform any synchronization with the kernel on these regs, we
    could race with the kernel to write stale values and end up not having vblank
    interrupts enabled when somebody was waiting on one.

diff --git a/src/i830_display.c b/src/i830_display.c
index 2e5d55a..7a9999a 100644
--- a/src/i830_display.c
+++ b/src/i830_display.c
@@ -1202,7 +1202,6 @@ i830_crtc_mode_set(xf86CrtcPtr crtc, DisplayModePtr mode,
     int dspstride_reg = (plane == 0) ? DSPASTRIDE : DSPBSTRIDE;
     int dsppos_reg = (plane == 0) ? DSPAPOS : DSPBPOS;
     int dspsize_reg = (plane == 0) ? DSPASIZE : DSPBSIZE;
-    int pipestat_reg = (pipe == 0) ? PIPEASTAT : PIPEBSTAT;
     int i, num_outputs = 0;
     int refclk;
     intel_clock_t clock;
@@ -1514,9 +1513,6 @@ i830_crtc_mode_set(xf86CrtcPtr crtc, DisplayModePtr mode,
 #endif
     
     i830WaitForVblank(pScrn);
-
-    /* Clear any FIFO underrun status that may have occurred normally */
-    OUTREG(pipestat_reg, INREG(pipestat_reg) | FIFO_UNDERRUN);
 }
 
 
diff --git a/src/i830_driver.c b/src/i830_driver.c
index c5d16a2..27d8694 100644
--- a/src/i830_driver.c
+++ b/src/i830_driver.c
@@ -2495,10 +2495,6 @@ RestoreHWState(ScrnInfoPtr pScrn)
        OUTREG(FBC_CONTROL, pI830->saveFBC_CONTROL);
    }
 
-   /* Clear any FIFO underrun status that may have occurred normally */
-   OUTREG(PIPEASTAT, INREG(PIPEASTAT) | FIFO_UNDERRUN);
-   OUTREG(PIPEBSTAT, INREG(PIPEBSTAT) | FIFO_UNDERRUN);
-
    vgaHWRestore(pScrn, vgaReg, VGA_SR_FONTS);
    vgaHWLock(hwp);
 
@@ -2619,7 +2615,6 @@ I830BlockHandler(int i,
     ScreenPtr pScreen = screenInfo.screens[i];
     ScrnInfoPtr pScrn = xf86Screens[i];
     I830Ptr pI830 = I830PTR(pScrn);
-    xf86CrtcConfigPtr xf86_config = XF86_CRTC_CONFIG_PTR(pScrn);
 
     pScreen->BlockHandler = pI830->BlockHandler;
 
@@ -2656,26 +2651,6 @@ I830BlockHandler(int i,
     if (pI830->accel == ACCEL_UXA)
 	i830_uxa_block_handler (pScreen);
 #endif
-    /*
-     * Check for FIFO underruns at block time (which amounts to just
-     * periodically).  If this happens, it means our DSPARB or some other
-     * memory arbitration setting is wrong for the current configuration
-     * (except for mode setting, where it may occur naturally).
-     * Check & ack the condition.
-     */
-    if (!pI830->use_drm_mode && pScrn->vtSema && !DSPARB_HWCONTROL(pI830)) {
-	if (xf86_config->crtc[0]->enabled &&
-		(INREG(PIPEASTAT) & FIFO_UNDERRUN)) {
-	    xf86DrvMsg(pScrn->scrnIndex, X_ERROR, "underrun on pipe A!\n");
-	    OUTREG(PIPEASTAT, INREG(PIPEASTAT) | FIFO_UNDERRUN);
-	}
-	if (xf86_config->num_crtc > 1 &&
-		xf86_config->crtc[1]->enabled &&
-		(INREG(PIPEBSTAT) & FIFO_UNDERRUN)) {
-	    xf86DrvMsg(pScrn->scrnIndex, X_ERROR, "underrun on pipe B!\n");
-	    OUTREG(PIPEBSTAT, INREG(PIPEBSTAT) | FIFO_UNDERRUN);
-	}
-    }
 
     I830VideoBlockHandler(i, blockData, pTimeout, pReadmask);
 }