[Nouveau] [RFC v3 04/10] drm/i915/dpcd_bl: Handle drm_dpcd_read/write() return values correctly
Rodrigo Vivi
rodrigo.vivi at intel.com
Mon Feb 8 11:11:45 UTC 2021
On Fri, Feb 05, 2021 at 06:45:08PM -0500, Lyude Paul wrote:
> This is kind of an annoying aspect of DRM's DP helpers:
> drm_dp_dpcd_readb/writeb() return the size of bytes read/written on
> success, thus we want to check against that instead of checking if the
> return value is less than 0.
>
> I'll probably be fixing this in the near future once I start doing DP work
> again, also because I'd rather not mix a tree-wide refactor like that in
> with a patch series intended to be around introducing DP backlight helpers.
> So, for now let's just handle the return values from each function
> correctly.
>
> Signed-off-by: Lyude Paul <lyude at redhat.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi at intel.com>
> ---
> .../drm/i915/display/intel_dp_aux_backlight.c | 41 +++++++++----------
> 1 file changed, 19 insertions(+), 22 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_dp_aux_backlight.c b/drivers/gpu/drm/i915/display/intel_dp_aux_backlight.c
> index 62294967f430..c37ccc8538cb 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp_aux_backlight.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp_aux_backlight.c
> @@ -107,7 +107,7 @@ intel_dp_aux_supports_hdr_backlight(struct intel_connector *connector)
> u8 tcon_cap[4];
>
> ret = drm_dp_dpcd_read(aux, INTEL_EDP_HDR_TCON_CAP0, tcon_cap, sizeof(tcon_cap));
> - if (ret < 0)
> + if (ret != sizeof(tcon_cap))
> return false;
>
> if (!(tcon_cap[1] & INTEL_EDP_HDR_TCON_BRIGHTNESS_NITS_CAP))
> @@ -137,7 +137,7 @@ intel_dp_aux_hdr_get_backlight(struct intel_connector *connector, enum pipe pipe
> u8 tmp;
> u8 buf[2] = { 0 };
>
> - if (drm_dp_dpcd_readb(&intel_dp->aux, INTEL_EDP_HDR_GETSET_CTRL_PARAMS, &tmp) < 0) {
> + if (drm_dp_dpcd_readb(&intel_dp->aux, INTEL_EDP_HDR_GETSET_CTRL_PARAMS, &tmp) != 1) {
> drm_err(&i915->drm, "Failed to read current backlight mode from DPCD\n");
> return 0;
> }
> @@ -153,7 +153,8 @@ intel_dp_aux_hdr_get_backlight(struct intel_connector *connector, enum pipe pipe
> return panel->backlight.max;
> }
>
> - if (drm_dp_dpcd_read(&intel_dp->aux, INTEL_EDP_BRIGHTNESS_NITS_LSB, buf, sizeof(buf)) < 0) {
> + if (drm_dp_dpcd_read(&intel_dp->aux, INTEL_EDP_BRIGHTNESS_NITS_LSB, buf,
> + sizeof(buf)) != sizeof(buf)) {
> drm_err(&i915->drm, "Failed to read brightness from DPCD\n");
> return 0;
> }
> @@ -172,7 +173,8 @@ intel_dp_aux_hdr_set_aux_backlight(const struct drm_connector_state *conn_state,
> buf[0] = level & 0xFF;
> buf[1] = (level & 0xFF00) >> 8;
>
> - if (drm_dp_dpcd_write(&intel_dp->aux, INTEL_EDP_BRIGHTNESS_NITS_LSB, buf, 4) < 0)
> + if (drm_dp_dpcd_write(&intel_dp->aux, INTEL_EDP_BRIGHTNESS_NITS_LSB, buf,
> + sizeof(buf)) != sizeof(buf))
> drm_err(dev, "Failed to write brightness level to DPCD\n");
> }
>
> @@ -203,7 +205,7 @@ intel_dp_aux_hdr_enable_backlight(const struct intel_crtc_state *crtc_state,
> u8 old_ctrl, ctrl;
>
> ret = drm_dp_dpcd_readb(&intel_dp->aux, INTEL_EDP_HDR_GETSET_CTRL_PARAMS, &old_ctrl);
> - if (ret < 0) {
> + if (ret != 1) {
> drm_err(&i915->drm, "Failed to read current backlight control mode: %d\n", ret);
> return;
> }
> @@ -221,7 +223,7 @@ intel_dp_aux_hdr_enable_backlight(const struct intel_crtc_state *crtc_state,
> }
>
> if (ctrl != old_ctrl)
> - if (drm_dp_dpcd_writeb(&intel_dp->aux, INTEL_EDP_HDR_GETSET_CTRL_PARAMS, ctrl) < 0)
> + if (drm_dp_dpcd_writeb(&intel_dp->aux, INTEL_EDP_HDR_GETSET_CTRL_PARAMS, ctrl) != 1)
> drm_err(&i915->drm, "Failed to configure DPCD brightness controls\n");
> }
>
> @@ -277,8 +279,7 @@ static void set_vesa_backlight_enable(struct intel_dp *intel_dp, bool enable)
> if (!(intel_dp->edp_dpcd[1] & DP_EDP_BACKLIGHT_AUX_ENABLE_CAP))
> return;
>
> - if (drm_dp_dpcd_readb(&intel_dp->aux, DP_EDP_DISPLAY_CONTROL_REGISTER,
> - ®_val) < 0) {
> + if (drm_dp_dpcd_readb(&intel_dp->aux, DP_EDP_DISPLAY_CONTROL_REGISTER, ®_val) != 1) {
> drm_dbg_kms(&i915->drm, "Failed to read DPCD register 0x%x\n",
> DP_EDP_DISPLAY_CONTROL_REGISTER);
> return;
> @@ -332,8 +333,8 @@ static u32 intel_dp_aux_vesa_get_backlight(struct intel_connector *connector, en
> if (!intel_dp_aux_vesa_backlight_dpcd_mode(connector))
> return connector->panel.backlight.max;
>
> - if (drm_dp_dpcd_read(&intel_dp->aux, DP_EDP_BACKLIGHT_BRIGHTNESS_MSB,
> - &read_val, sizeof(read_val)) < 0) {
> + if (drm_dp_dpcd_read(&intel_dp->aux, DP_EDP_BACKLIGHT_BRIGHTNESS_MSB, &read_val,
> + sizeof(read_val)) != sizeof(read_val)) {
> drm_dbg_kms(&i915->drm, "Failed to read DPCD register 0x%x\n",
> DP_EDP_BACKLIGHT_BRIGHTNESS_MSB);
> return 0;
> @@ -365,8 +366,8 @@ intel_dp_aux_vesa_set_backlight(const struct drm_connector_state *conn_state,
> vals[0] = (level & 0xFF00) >> 8;
> vals[1] = (level & 0xFF);
> }
> - if (drm_dp_dpcd_write(&intel_dp->aux, DP_EDP_BACKLIGHT_BRIGHTNESS_MSB,
> - vals, sizeof(vals)) < 0) {
> + if (drm_dp_dpcd_write(&intel_dp->aux, DP_EDP_BACKLIGHT_BRIGHTNESS_MSB, vals,
> + sizeof(vals)) != sizeof(vals)) {
> drm_dbg_kms(&i915->drm,
> "Failed to write aux backlight level\n");
> return;
> @@ -401,9 +402,8 @@ intel_dp_aux_vesa_enable_backlight(const struct intel_crtc_state *crtc_state,
> new_dpcd_buf &= ~DP_EDP_BACKLIGHT_CONTROL_MODE_MASK;
> new_dpcd_buf |= DP_EDP_BACKLIGHT_CONTROL_MODE_DPCD;
>
> - if (drm_dp_dpcd_writeb(&intel_dp->aux,
> - DP_EDP_PWMGEN_BIT_COUNT,
> - pwmgen_bit_count) < 0)
> + if (drm_dp_dpcd_writeb(&intel_dp->aux, DP_EDP_PWMGEN_BIT_COUNT,
> + pwmgen_bit_count) != 1)
> drm_dbg_kms(&i915->drm,
> "Failed to write aux pwmgen bit count\n");
>
> @@ -424,11 +424,9 @@ intel_dp_aux_vesa_enable_backlight(const struct intel_crtc_state *crtc_state,
> }
>
> if (new_dpcd_buf != dpcd_buf) {
> - if (drm_dp_dpcd_writeb(&intel_dp->aux,
> - DP_EDP_BACKLIGHT_MODE_SET_REGISTER, new_dpcd_buf) < 0) {
> - drm_dbg_kms(&i915->drm,
> - "Failed to write aux backlight mode\n");
> - }
> + if (drm_dp_dpcd_writeb(&intel_dp->aux, DP_EDP_BACKLIGHT_MODE_SET_REGISTER,
> + new_dpcd_buf) != 1)
> + drm_dbg_kms(&i915->drm, "Failed to write aux backlight mode\n");
> }
>
> intel_dp_aux_vesa_set_backlight(conn_state, level);
> @@ -519,8 +517,7 @@ static u32 intel_dp_aux_vesa_calc_max_backlight(struct intel_connector *connecto
> }
>
> drm_dbg_kms(&i915->drm, "Using eDP pwmgen bit count of %d\n", pn);
> - if (drm_dp_dpcd_writeb(&intel_dp->aux,
> - DP_EDP_PWMGEN_BIT_COUNT, pn) < 0) {
> + if (drm_dp_dpcd_writeb(&intel_dp->aux, DP_EDP_PWMGEN_BIT_COUNT, pn) != 1) {
> drm_dbg_kms(&i915->drm,
> "Failed to write aux pwmgen bit count\n");
> return max_backlight;
> --
> 2.29.2
>
> _______________________________________________
> dri-devel mailing list
> dri-devel at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
More information about the Nouveau
mailing list