[PATCH] drm/virtio: Pass correct device to dma_sync_sgtable_for_device()
Oleksandr Tyshchenko
olekstysh at gmail.com
Fri Feb 24 15:34:50 UTC 2023
From: Oleksandr Tyshchenko <oleksandr_tyshchenko at epam.com>
The "vdev->dev.parent" should be used instead of "vdev->dev" as a device
for which to perform the DMA operation in both
virtio_gpu_cmd_transfer_to_host_2d(3d).
Because the virtio-gpu device "vdev->dev" doesn't really have DMA OPS
assigned to it, but parent (virtio-pci or virtio-mmio) device
"vdev->dev.parent" has. The more, the sgtable in question the code is
trying to sync here was mapped for the parent device (by using its DMA OPS)
previously at:
virtio_gpu_object_shmem_init()->drm_gem_shmem_get_pages_sgt()->
dma_map_sgtable(), so should be synced here for the same parent device.
Fixes: b5c9ed70d1a9 ("drm/virtio: Improve DMA API usage for shmem BOs")
Signed-off-by: Oleksandr Tyshchenko <oleksandr_tyshchenko at epam.com>
---
This patch fixes the following issue when running on top of Xen with
CONFIG_XEN_VIRTIO=y (patch was only tested in Xen environment (ARM64 guest)
w/ and w/o using Xen grants for virtio):
[ 0.830235] [drm] pci: virtio-gpu-pci detected at 0000:00:03.0
[ 0.832078] [drm] features: +virgl +edid -resource_blob -host_visible
[ 0.832084] [drm] features: -context_init
[ 0.837320] [drm] number of scanouts: 1
[ 0.837460] [drm] number of cap sets: 2
[ 0.904372] [drm] cap set 0: id 1, max-version 1, max-size 308
[ 0.905399] [drm] cap set 1: id 2, max-version 2, max-size 696
[ 0.907202] [drm] Initialized virtio_gpu 0.1.0 0 for 0000:00:03.0 on minor 0
[ 0.927241] virtio-pci 0000:00:03.0: [drm] drm_plane_enable_fb_damage_clips() not called
[ 0.927279] Unable to handle kernel paging request at virtual address ffffffffc0053000
[ 0.927284] Mem abort info:
[ 0.927286] ESR = 0x0000000096000144
[ 0.927289] EC = 0x25: DABT (current EL), IL = 32 bits
[ 0.927293] SET = 0, FnV = 0
[ 0.927295] EA = 0, S1PTW = 0
[ 0.927298] FSC = 0x04: level 0 translation fault
[ 0.927301] Data abort info:
[ 0.927303] ISV = 0, ISS = 0x00000144
[ 0.927305] CM = 1, WnR = 1
[ 0.927308] swapper pgtable: 4k pages, 48-bit VAs, pgdp=000000004127f000
[ 0.927312] [ffffffffc0053000] pgd=0000000000000000, p4d=0000000000000000
[ 0.927323] Internal error: Oops: 0000000096000144 [#1] PREEMPT SMP
[ 0.927329] Modules linked in:
[ 0.927336] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 6.2.0-rc4-yocto-standard #1
[ 0.927343] Hardware name: XENVM-4.18 (DT)
[ 0.927346] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 0.927352] pc : dcache_clean_poc+0x20/0x38
[ 0.927370] lr : arch_sync_dma_for_device+0x24/0x30
[ 0.927379] sp : ffff80000972b3e0
[ 0.927381] x29: ffff80000972b3e0 x28: ffff000001aa8a00 x27: 0000000000000000
[ 0.927389] x26: 0000000000000000 x25: ffff000002815010 x24: 0000000000000000
[ 0.927396] x23: ffff8000090f9078 x22: 0000000000000001 x21: 0000000000000002
[ 0.927403] x20: ffff000002b6b580 x19: 8000000000053000 x18: ffffffffffffffff
[ 0.927410] x17: 0000000000000000 x16: 0000000000000000 x15: ffff80000963b94e
[ 0.927416] x14: 0000000000000001 x13: ffff80000963b93b x12: 64615f616d645f67
[ 0.927423] x11: ffff800009513110 x10: 000000000000000a x9 : ffff80000972b360
[ 0.927430] x8 : ffff8000095130c8 x7 : ffff80000972b150 x6 : 000000000000000c
[ 0.927436] x5 : 0000000000000000 x4 : 0000000000000000 x3 : 000000000000003f
[ 0.927443] x2 : 0000000000000040 x1 : ffffffffc0067000 x0 : ffffffffc0053000
[ 0.927450] Call trace:
[ 0.927452] dcache_clean_poc+0x20/0x38
[ 0.927459] dma_direct_sync_sg_for_device+0x124/0x130
[ 0.927466] dma_sync_sg_for_device+0x64/0xd0
[ 0.927475] virtio_gpu_cmd_transfer_to_host_2d+0x10c/0x110
[ 0.927483] virtio_gpu_primary_plane_update+0x340/0x3d0
[ 0.927490] drm_atomic_helper_commit_planes+0xe8/0x20c
[ 0.927497] drm_atomic_helper_commit_tail+0x54/0xa0
[ 0.927503] commit_tail+0x160/0x190
[ 0.927507] drm_atomic_helper_commit+0x16c/0x180
[ 0.927513] drm_atomic_commit+0xa8/0xe0
[ 0.927521] drm_client_modeset_commit_atomic+0x200/0x260
[ 0.927529] drm_client_modeset_commit_locked+0x5c/0x1a0
[ 0.927536] drm_client_modeset_commit+0x30/0x60
[ 0.927540] drm_fb_helper_set_par+0xc8/0x120
[ 0.927548] fbcon_init+0x3b8/0x510
[ 0.927557] visual_init+0xb4/0x104
[ 0.927565] do_bind_con_driver.isra.0+0x1c4/0x394
[ 0.927572] do_take_over_console+0x144/0x1fc
[ 0.927577] do_fbcon_takeover+0x6c/0xe4
[ 0.927583] fbcon_fb_registered+0x1e4/0x1f0
[ 0.927588] register_framebuffer+0x214/0x310
[ 0.927592] __drm_fb_helper_initial_config_and_unlock+0x33c/0x540
[ 0.927599] drm_fb_helper_initial_config+0x4c/0x60
[ 0.927604] drm_fbdev_client_hotplug+0xc4/0x150
[ 0.927609] drm_fbdev_generic_setup+0x90/0x154
[ 0.927614] virtio_gpu_probe+0xc8/0x16c
[ 0.927621] virtio_dev_probe+0x19c/0x240
[ 0.927629] really_probe+0xbc/0x2dc
[ 0.927637] __driver_probe_device+0x78/0xe0
[ 0.927641] driver_probe_device+0xd8/0x160
[ 0.927645] __driver_attach+0x94/0x19c
[ 0.927649] bus_for_each_dev+0x70/0xd0
[ 0.927656] driver_attach+0x24/0x30
[ 0.927660] bus_add_driver+0x154/0x20c
[ 0.927664] driver_register+0x78/0x130
[ 0.927670] register_virtio_driver+0x24/0x3c
[ 0.927675] virtio_gpu_driver_init+0x18/0x24
[ 0.927684] do_one_initcall+0x50/0x1d0
[ 0.927691] kernel_init_freeable+0x210/0x27c
[ 0.927699] kernel_init+0x24/0x12c
[ 0.927707] ret_from_fork+0x10/0x20
[ 0.927716] Code: d2800082 9ac32042 d1000443 8a230000 (d50b7a20)
[ 0.927721] ---[ end trace 0000000000000000 ]---
[ 0.927728] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
[ 0.927732] SMP: stopping secondary CPUs
[ 0.927791] Kernel Offset: disabled
[ 0.927794] CPU features: 0x80000,41058100,0000421b
[ 0.927799] Memory Limit: none
[ 1.015063] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b ]---
---
---
drivers/gpu/drm/virtio/virtgpu_vq.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/virtio/virtgpu_vq.c b/drivers/gpu/drm/virtio/virtgpu_vq.c
index a04a9b20896d..1778a2081fd6 100644
--- a/drivers/gpu/drm/virtio/virtgpu_vq.c
+++ b/drivers/gpu/drm/virtio/virtgpu_vq.c
@@ -604,7 +604,7 @@ void virtio_gpu_cmd_transfer_to_host_2d(struct virtio_gpu_device *vgdev,
bool use_dma_api = !virtio_has_dma_quirk(vgdev->vdev);
if (virtio_gpu_is_shmem(bo) && use_dma_api)
- dma_sync_sgtable_for_device(&vgdev->vdev->dev,
+ dma_sync_sgtable_for_device(vgdev->vdev->dev.parent,
bo->base.sgt, DMA_TO_DEVICE);
cmd_p = virtio_gpu_alloc_cmd(vgdev, &vbuf, sizeof(*cmd_p));
@@ -1026,7 +1026,7 @@ void virtio_gpu_cmd_transfer_to_host_3d(struct virtio_gpu_device *vgdev,
bool use_dma_api = !virtio_has_dma_quirk(vgdev->vdev);
if (virtio_gpu_is_shmem(bo) && use_dma_api)
- dma_sync_sgtable_for_device(&vgdev->vdev->dev,
+ dma_sync_sgtable_for_device(vgdev->vdev->dev.parent,
bo->base.sgt, DMA_TO_DEVICE);
cmd_p = virtio_gpu_alloc_cmd(vgdev, &vbuf, sizeof(*cmd_p));
--
2.34.1
More information about the dri-devel
mailing list