[PATCH v3 3/5] drm/mediatek: Remove .get_edid callback
Pin-yen Lin
treapking at chromium.org
Sat Feb 18 11:17:10 UTC 2023
The original implementation peaking into the remote nodes to get the
ddc bus fwnode, which is not a good practice. Remove the callback from
this driver and rely on drm_connector helpers to read EDID.
Signed-off-by: Pin-yen Lin <treapking at chromium.org>
---
Changes in v3:
- New in v3
drivers/gpu/drm/mediatek/mtk_hdmi.c | 53 +++++++----------------------
1 file changed, 13 insertions(+), 40 deletions(-)
diff --git a/drivers/gpu/drm/mediatek/mtk_hdmi.c b/drivers/gpu/drm/mediatek/mtk_hdmi.c
index 0a8e0a13f516..44952e539059 100644
--- a/drivers/gpu/drm/mediatek/mtk_hdmi.c
+++ b/drivers/gpu/drm/mediatek/mtk_hdmi.c
@@ -159,7 +159,6 @@ struct mtk_hdmi {
const struct mtk_hdmi_conf *conf;
struct phy *phy;
struct device *cec_dev;
- struct i2c_adapter *ddc_adpt;
struct clk *clk[MTK_HDMI_CLK_COUNT];
struct drm_display_mode mode;
bool dvi_mode;
@@ -1265,21 +1264,6 @@ static enum drm_connector_status mtk_hdmi_bridge_detect(struct drm_bridge *bridg
return mtk_hdmi_detect(hdmi);
}
-static struct edid *mtk_hdmi_bridge_get_edid(struct drm_bridge *bridge,
- struct drm_connector *connector)
-{
- struct mtk_hdmi *hdmi = hdmi_ctx_from_bridge(bridge);
- struct edid *edid;
-
- if (!hdmi->ddc_adpt)
- return NULL;
- edid = drm_get_edid(connector, hdmi->ddc_adpt);
- if (!edid)
- return NULL;
- hdmi->dvi_mode = !drm_detect_monitor_audio(edid);
- return edid;
-}
-
static int mtk_hdmi_bridge_attach(struct drm_bridge *bridge,
enum drm_bridge_attach_flags flags)
{
@@ -1390,10 +1374,19 @@ static void mtk_hdmi_bridge_atomic_enable(struct drm_bridge *bridge,
{
struct drm_atomic_state *state = old_state->base.state;
struct mtk_hdmi *hdmi = hdmi_ctx_from_bridge(bridge);
+ struct edid *edid;
/* Retrieve the connector through the atomic state. */
- hdmi->curr_conn = drm_atomic_get_new_connector_for_encoder(state,
- bridge->encoder);
+ if (!hdmi->curr_conn)
+ hdmi->curr_conn = drm_atomic_get_new_connector_for_encoder(
+ state, bridge->encoder);
+
+ if (hdmi->curr_conn->edid_blob_ptr) {
+ edid = (struct edid *)hdmi->curr_conn->edid_blob_ptr->data;
+ hdmi->dvi_mode = !drm_detect_monitor_audio(edid);
+ } else {
+ dev_err(hdmi->dev, "No edid in drm_connector object\n");
+ }
mtk_hdmi_output_set_display_mode(hdmi, &hdmi->mode);
clk_prepare_enable(hdmi->clk[MTK_HDMI_CLK_HDMI_PLL]);
@@ -1417,7 +1410,6 @@ static const struct drm_bridge_funcs mtk_hdmi_bridge_funcs = {
.atomic_pre_enable = mtk_hdmi_bridge_atomic_pre_enable,
.atomic_enable = mtk_hdmi_bridge_atomic_enable,
.detect = mtk_hdmi_bridge_detect,
- .get_edid = mtk_hdmi_bridge_get_edid,
};
static int mtk_hdmi_dt_parse_pdata(struct mtk_hdmi *hdmi,
@@ -1425,7 +1417,7 @@ static int mtk_hdmi_dt_parse_pdata(struct mtk_hdmi *hdmi,
{
struct device *dev = &pdev->dev;
struct device_node *np = dev->of_node;
- struct device_node *cec_np, *remote, *i2c_np;
+ struct device_node *cec_np, *remote;
struct platform_device *cec_pdev;
struct regmap *regmap;
struct resource *mem;
@@ -1497,24 +1489,6 @@ static int mtk_hdmi_dt_parse_pdata(struct mtk_hdmi *hdmi,
}
}
- i2c_np = of_parse_phandle(remote, "ddc-i2c-bus", 0);
- if (!i2c_np) {
- dev_err(dev, "Failed to find ddc-i2c-bus node in %pOF\n",
- remote);
- of_node_put(remote);
- ret = -EINVAL;
- goto put_device;
- }
- of_node_put(remote);
-
- hdmi->ddc_adpt = of_find_i2c_adapter_by_node(i2c_np);
- of_node_put(i2c_np);
- if (!hdmi->ddc_adpt) {
- dev_err(dev, "Failed to get ddc i2c adapter by node\n");
- ret = -EINVAL;
- goto put_device;
- }
-
return 0;
put_device:
put_device(hdmi->cec_dev);
@@ -1728,8 +1702,7 @@ static int mtk_drm_hdmi_probe(struct platform_device *pdev)
hdmi->bridge.funcs = &mtk_hdmi_bridge_funcs;
hdmi->bridge.of_node = pdev->dev.of_node;
- hdmi->bridge.ops = DRM_BRIDGE_OP_DETECT | DRM_BRIDGE_OP_EDID
- | DRM_BRIDGE_OP_HPD;
+ hdmi->bridge.ops = DRM_BRIDGE_OP_DETECT | DRM_BRIDGE_OP_HPD;
hdmi->bridge.type = DRM_MODE_CONNECTOR_HDMIA;
drm_bridge_add(&hdmi->bridge);
--
2.39.2.637.g21b0678d19-goog
More information about the dri-devel
mailing list