[PATCHv3 2/2] i915/display/dp: SDP CRC16 for 128b132b link layer

[Jani Nikula]

On Tue, 07 Feb 2023, Arun R Murthy <arun.r.murthy at intel.com> wrote:
> Enable SDP error detection configuration, this will set CRC16 in
> 128b/132b link layer.
> For Display version 13 a hardware bit31 in register VIDEO_DIP_CTL is
> added to enable/disable SDP CRC applicable for DP2.0 only, but the
> default value of this bit will enable CRC16 in 128b/132b hence
> skipping this write.
> Corrective actions on SDP corruption is yet to be defined.
>
> v2: Moved the CRC enable to link training init(Jani N)
> v3: Moved crc enable to ddi pre enable <Jani N>

It's still in intel_dp_start_link_train()...?

BR,
Jani.


>
> Signed-off-by: Arun R Murthy <arun.r.murthy at intel.com>
> ---
>  .../gpu/drm/i915/display/intel_dp_link_training.c    | 12 ++++++++++++
>  1 file changed, 12 insertions(+)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_dp_link_training.c b/drivers/gpu/drm/i915/display/intel_dp_link_training.c
> index 3d3efcf02011..7064e465423b 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp_link_training.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp_link_training.c
> @@ -1453,4 +1453,16 @@ void intel_dp_start_link_train(struct intel_dp *intel_dp,
>  
>  	if (!passed)
>  		intel_dp_schedule_fallback_link_training(intel_dp, crtc_state);
> +
> +	/* DP v2.0 SCR on SDP CRC16 for 128b/132b Link Layer */
> +	if (intel_dp_is_uhbr(crtc_state) && passed)
> +		drm_dp_dpcd_writeb(&intel_dp->aux,
> +				   DP_SDP_ERROR_DETECTION_CONFIGURATION,
> +				   DP_SDP_CRC16_128B132B_EN);
> +		/*
> +		 * VIDEO_DIP_CTL register bit 31 should be set to '0' to not
> +		 * disable SDP CRC. This is applicable for Display version 13.
> +		 * Default value of bit 31 is '0' hence discarding the write
> +		 */
> +		/* TODO: Corrective actions on SDP corruption yet to be defined */
>  }

-- 
Jani Nikula, Intel Open Source Graphics Center