[PATCH v2 0/5] arm64: dts: qcom: add DP Controller to SM8350 & SM8450 DTS

[Dmitry Baryshkov]

On 10/02/2023 12:34, Neil Armstrong wrote:
> Switch the QMP PHY to the newly documented USB3/DP Combo PHY
> bindings at [1] and add the DP controller nodes.
> 
> The DP output is shared with the USB3 SuperSpeed lanes and is
> usually connected to an USB-C port which Altmode is controlled
> by the PMIC Glink infrastructure in discution at [2] & [3].
> 
> DT changes tying the DP controller to the USB-C port on the HDK
> boards will be sent later.
> 
> Bindings dependencies at [1]
> 
> [1] https://lore.kernel.org/all/20230206-topic-sm8350-upstream-usb-dp-combo-phy-v1-1-ed849ae6b849@linaro.org/
> [2] https://lore.kernel.org/all/20230201041853.1934355-1-quic_bjorande@quicinc.com/
> [3] https://lore.kernel.org/all/20230130-topic-sm8450-upstream-pmic-glink-v1-0-0b0acfad301e@linaro.org/
> 
> Signed-off-by: Neil Armstrong <neil.armstrong at linaro.org>

Tested-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org> #SM8350-HDK

-- 
With best wishes
Dmitry