[PATCH v11 7/9] dt-bindings: display: bridge: it6505: Add mode-switch support

[Rob Herring]

On Sat, Feb 04, 2023 at 09:30:38PM +0800, Pin-yen Lin wrote:
> ITE IT6505 can be used in systems to switch the DP traffic between
> two downstreams, which can be USB Type-C DisplayPort alternate mode
> lane or regular DisplayPort output ports.
> 
> Update the binding to accommodate this usage by introducing a
> data-lanes and a mode-switch property on endpoints.
> 
> Signed-off-by: Pin-yen Lin <treapking at chromium.org>
> 
> ---
> 
> Changes in v11:
> - Updated the description of the endpoints in the bindings
> - Referenced video-interfaces.yaml instead for the endpoints binding
> - Removed duplicated definitions from inherited schema
> 
> Changes in v9:
> - Fixed subject prefix again
> - Changed the naming of the example node for it6505
> 
> Changes in v8:
> - Updated bindings for data-lanes property
> - Fixed subject prefix
> 
> Changes in v7:
> - Fixed issues reported by dt_binding_check.
> - Updated the schema and the example dts for data-lanes.
> - Changed to generic naming for the example dts node.
> 
> Changes in v6:
> - Remove switches node and use endpoints and data-lanes property to
>   describe the connections.
> 
>  .../bindings/display/bridge/ite,it6505.yaml   | 101 +++++++++++++++---
>  1 file changed, 88 insertions(+), 13 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml b/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml
> index b16a9d9127dd..8ae9c5cba22c 100644
> --- a/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml
> +++ b/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml
> @@ -75,22 +75,49 @@ properties:
>        port at 1:
>          $ref: /schemas/graph.yaml#/$defs/port-base
>          unevaluatedProperties: false
> -        description: Video port for DP output
> +        description:
> +          Video port for DP output. Each endpoint connects to a video output
> +          downstream, and the "data-lanes" property is used to describe the pin
> +          connections. 0, 1, 2, 3 in "data-lanes" maps to TX0, TX1, TX2, TX3,
> +          respectively.
>  
> -        properties:
> -          endpoint:
> -            $ref: /schemas/graph.yaml#/$defs/endpoint-base
> +
> +        patternProperties:
> +          "^endpoint@[01]$":
> +            $ref: /schemas/media/video-interfaces.yaml#
>              unevaluatedProperties: false
>  
>              properties:
> +              reg: true
> +
> +              remote-endpoint: true
> +
>                data-lanes:
> -                minItems: 1
> -                uniqueItems: true
> -                items:
> -                  - enum: [ 0, 1 ]
> -                  - const: 1
> -                  - const: 2
> -                  - const: 3
> +                oneOf:
> +                  - items:
> +                      - enum: [0, 1, 2, 3]
> +
> +                  - items:
> +                      - const: 0
> +                      - const: 1
> +
> +                  - items:
> +                      - const: 2
> +                      - const: 3
> +
> +                  - items:
> +                      - const: 0
> +                      - const: 1
> +                      - const: 2
> +                      - const: 3
> +
> +              mode-switch:
> +                type: boolean
> +                description: Register this node as a Type-C mode switch or not.

Existing users put this property in the device's node, not the endpoint. 
That seems more like a property of the device, than the DP link.

You are using fwnode_typec_mux_get(), right?

Rob