[PATCH 7/8] arm64: dts: qcom: sm8350: add GPU, GMU, GPU CC and SMMU nodes

Dmitry Baryshkov dmitry.baryshkov at linaro.org
Mon Feb 6 13:48:19 UTC 2023


On 06/02/2023 12:51, Konrad Dybcio wrote:
> 
> 
> On 6.02.2023 01:27, Dmitry Baryshkov wrote:
>> Add device nodes required to enable GPU on the SM8350 platform.
>>
>> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
>> ---
>>   arch/arm64/boot/dts/qcom/sm8350.dtsi | 179 +++++++++++++++++++++++++++
>>   1 file changed, 179 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
>> index e5b308957f88..a73cd9eb63e0 100644
>> --- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
>> @@ -7,6 +7,7 @@
>>   #include <dt-bindings/interrupt-controller/arm-gic.h>
>>   #include <dt-bindings/clock/qcom,dispcc-sm8350.h>
>>   #include <dt-bindings/clock/qcom,gcc-sm8350.h>
>> +#include <dt-bindings/clock/qcom,gpucc-sm8350.h>
>>   #include <dt-bindings/clock/qcom,rpmh.h>
>>   #include <dt-bindings/dma/qcom-gpi.h>
>>   #include <dt-bindings/gpio/gpio.h>
>> @@ -1767,6 +1768,184 @@ tcsr_mutex: hwlock at 1f40000 {
>>   			#hwlock-cells = <1>;
>>   		};
>>   
>> +		gpu: gpu at 3d00000 {
>> +			compatible = "qcom,adreno-660.1",
>> +				     "qcom,adreno";
> No need to wrap this line.
> 
>> +
>> +			reg = <0 0x03d00000 0 0x40000>,
>> +			      <0 0x03d9e000 0 0x1000>,
>> +			      <0 0x03d61000 0 0x800>;
>> +			reg-names = "kgsl_3d0_reg_memory",
>> +				    "cx_mem",
>> +				    "cx_dbgc";
>> +
>> +			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
>> +
>> +			iommus = <&adreno_smmu 0 0x400>, <&adreno_smmu 1 0x400>;
>> +
>> +			operating-points-v2 = <&gpu_opp_table>;
>> +
>> +			qcom,gmu = <&gmu>;
>> +
>> +			status = "disabled";
>> +
>> +			zap-shader {
>> +				memory-region = <&pil_gpu_mem>;
>> +			};
>> +
>> +			/* note: downstream checks gpu binning for 670 Mhz */
>> +			gpu_opp_table: opp-table {
>> +				compatible = "operating-points-v2";
>> +
>> +				/* not for v1 */
> The shipping version is v2.1 and you defined the 660.1 chipid,
> which maps to lahaina(>=v2)

Yes, let's drop these comments.

> 
>> +				opp-840000000 {
>> +					opp-hz = /bits/ 64 <840000000>;
>> +					opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
>> +				};
>> +
>> +				/* not for v1 */
>> +				opp-778000000 {
>> +					opp-hz = /bits/ 64 <778000000>;
>> +					opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
>> +				};
>> +
>> +				/* not for v1 */
>> +				opp-738000000 {
>> +					opp-hz = /bits/ 64 <738000000>;
>> +					opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
>> +				};
>> +
>> +				/* for v1
>> +				opp-710000000 {
>> +					opp-hz = /bits/ 64 <710000000>;
>> +					opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
>> +				};
>> +				*/
>> +
>> +				opp-676000000 {
>> +					opp-hz = /bits/ 64 <676000000>;
>> +					opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
>> +				};
>> +
>> +				opp-608000000 {
>> +					opp-hz = /bits/ 64 <608000000>;
>> +					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>;
>> +				};
>> +
>> +				opp-540000000 {
>> +					opp-hz = /bits/ 64 <540000000>;
>> +					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
>> +				};
>> +
>> +				/* not for v1 */
>> +				opp-491000000 {
>> +					opp-hz = /bits/ 64 <491000000>;
>> +					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L0>;
>> +				};
>> +
>> +				opp-443000000 {
>> +					opp-hz = /bits/ 64 <443000000>;
>> +					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
>> +				};
>> +
>> +				/* not for v1 */
>> +				opp-379000000 {
>> +					opp-hz = /bits/ 64 <379000000>;
>> +					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_L1>;
>> +				};
>> +
>> +				opp-315000000 {
>> +					opp-hz = /bits/ 64 <315000000>;
>> +					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
>> +				};
>> +			};
>> +		};
>> +
>> +		gmu: gmu at 3d6a000 {
>> +			compatible = "qcom,adreno-gmu-660.1", "qcom,adreno-gmu";
>> +
>> +			reg = <0 0x03d6a000 0 0x34000>,
>> +			      <0 0x03de0000 0 0x10000>,
>> +			      <0 0x0b290000 0 0x10000>;
>> +			reg-names = "gmu", "rscc", "gmu_pdc";
>> +
>> +			interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
>> +			interrupt-names = "hfi", "gmu";
>> +
>> +			clocks = <&gpucc GPU_CC_CX_GMU_CLK>,
>> +				 <&gpucc GPU_CC_CXO_CLK>,
>> +				 <&gcc GCC_DDRSS_GPU_AXI_CLK>,
>> +				 <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
>> +				 <&gpucc GPU_CC_AHB_CLK>,
>> +				 <&gpucc GPU_CC_HUB_CX_INT_CLK>,
>> +				 <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>;
> Shouldn't this one belong to the smmu?

The vendor kernel lists it both for the smmu and the gpu. SC7280 also 
lists it for both devices. I'll take a look at the smmu clocks for the v2.

> 
>> +			clock-names = "gmu",
>> +				      "cxo",
>> +				      "axi",
>> +				      "memnoc",
>> +				      "ahb",
>> +				      "hub",
>> +				      "smmu_vote";
>> +
>> +			power-domains = <&gpucc GPU_CX_GDSC>,
>> +					<&gpucc GPU_GX_GDSC>;
>> +			power-domain-names = "cx",
>> +					     "gx";
>> +
>> +			iommus = <&adreno_smmu 5 0x400>;
>> +
>> +			operating-points-v2 = <&gmu_opp_table>;
>> +
>> +			gmu_opp_table: opp-table {
>> +				compatible = "operating-points-v2";
>> +
>> +				opp-200000000 {
>> +					opp-hz = /bits/ 64 <200000000>;
>> +					opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
>> +				};
>> +			};
>> +		};
>> +
>> +		gpucc: clock-controller at 3d90000 {
>> +			compatible = "qcom,sm8350-gpucc";
>> +			reg = <0 0x03d90000 0 0x9000>;
>> +			clocks = <&rpmhcc RPMH_CXO_CLK>,
>> +				 <&gcc GCC_GPU_GPLL0_CLK_SRC>,
>> +				 <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
>> +			clock-names = "bi_tcxo",
>> +				      "gcc_gpu_gpll0_clk_src",
>> +				      "gcc_gpu_gpll0_div_clk_src";
>> +			#clock-cells = <1>;
>> +			#reset-cells = <1>;
>> +			#power-domain-cells = <1>;
>> +		};
>> +
>> +		adreno_smmu: iommu at 3da0000 {
>> +			compatible = "qcom,sm8350-smmu-500", "qcom,adreno-smmu", "arm,mmu-500";
>> +			reg = <0 0x03da0000 0 0x20000>;
>> +			#iommu-cells = <2>;
>> +			#global-interrupts = <2>;
>> +			interrupts = <GIC_SPI 672 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 678 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 679 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 680 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH>;
>> +			clocks = <&gpucc GPU_CC_AHB_CLK>,
>> +				 <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
>> +				 <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>;
>> +			clock-names = "ahb", "bus", "iface";
>> +
>> +			power-domains = <&gpucc GPU_CX_GDSC>;
> Downstream marks this smmu dma-coherent



> 
> Konrad
>> +		};
>> +
>>   		lpass_ag_noc: interconnect at 3c40000 {
>>   			compatible = "qcom,sm8350-lpass-ag-noc";
>>   			reg = <0 0x03c40000 0 0xf080>;

-- 
With best wishes
Dmitry



More information about the dri-devel mailing list