[PATCH v3 11/27] drm/msm/dpu: move stride programming to dpu_hw_sspp_setup_sourceaddress
Abhinav Kumar
quic_abhinavk at quicinc.com
Fri Feb 3 20:37:15 UTC 2023
On 2/3/2023 10:21 AM, Dmitry Baryshkov wrote:
> Move stride programming to dpu_hw_sspp_setup_sourceaddress(), so that
> dpu_hw_sspp_setup_rects() programs only source and destination
> rectangles.
>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
Now with the prev change, this is
Reviewed-by: Abhinav Kumar <quic_abhinavk at quicinc.com>
> ---
> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.c | 57 +++++++++++----------
> 1 file changed, 29 insertions(+), 28 deletions(-)
>
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.c
> index 4c05f4b5e050..fbfb39a7a229 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.c
> @@ -451,7 +451,7 @@ static void dpu_hw_sspp_setup_rects(struct dpu_sw_pipe *pipe,
> {
> struct dpu_hw_sspp *ctx = pipe->sspp;
> struct dpu_hw_blk_reg_map *c;
> - u32 src_size, src_xy, dst_size, dst_xy, ystride0, ystride1;
> + u32 src_size, src_xy, dst_size, dst_xy;
> u32 src_size_off, src_xy_off, out_size_off, out_xy_off;
> u32 idx;
>
> @@ -482,44 +482,18 @@ static void dpu_hw_sspp_setup_rects(struct dpu_sw_pipe *pipe,
> dst_size = (drm_rect_height(&cfg->dst_rect) << 16) |
> drm_rect_width(&cfg->dst_rect);
>
> - if (pipe->multirect_index == DPU_SSPP_RECT_SOLO) {
> - ystride0 = (cfg->layout.plane_pitch[0]) |
> - (cfg->layout.plane_pitch[1] << 16);
> - ystride1 = (cfg->layout.plane_pitch[2]) |
> - (cfg->layout.plane_pitch[3] << 16);
> - } else {
> - ystride0 = DPU_REG_READ(c, SSPP_SRC_YSTRIDE0 + idx);
> - ystride1 = DPU_REG_READ(c, SSPP_SRC_YSTRIDE1 + idx);
> -
> - if (pipe->multirect_index == DPU_SSPP_RECT_0) {
> - ystride0 = (ystride0 & 0xFFFF0000) |
> - (cfg->layout.plane_pitch[0] & 0x0000FFFF);
> - ystride1 = (ystride1 & 0xFFFF0000)|
> - (cfg->layout.plane_pitch[2] & 0x0000FFFF);
> - } else {
> - ystride0 = (ystride0 & 0x0000FFFF) |
> - ((cfg->layout.plane_pitch[0] << 16) &
> - 0xFFFF0000);
> - ystride1 = (ystride1 & 0x0000FFFF) |
> - ((cfg->layout.plane_pitch[2] << 16) &
> - 0xFFFF0000);
> - }
> - }
> -
> /* rectangle register programming */
> DPU_REG_WRITE(c, src_size_off + idx, src_size);
> DPU_REG_WRITE(c, src_xy_off + idx, src_xy);
> DPU_REG_WRITE(c, out_size_off + idx, dst_size);
> DPU_REG_WRITE(c, out_xy_off + idx, dst_xy);
> -
> - DPU_REG_WRITE(c, SSPP_SRC_YSTRIDE0 + idx, ystride0);
> - DPU_REG_WRITE(c, SSPP_SRC_YSTRIDE1 + idx, ystride1);
> }
>
> static void dpu_hw_sspp_setup_sourceaddress(struct dpu_sw_pipe *pipe,
> struct dpu_hw_sspp_cfg *cfg)
> {
> struct dpu_hw_sspp *ctx = pipe->sspp;
> + u32 ystride0, ystride1;
> int i;
> u32 idx;
>
> @@ -541,6 +515,33 @@ static void dpu_hw_sspp_setup_sourceaddress(struct dpu_sw_pipe *pipe,
> DPU_REG_WRITE(&ctx->hw, SSPP_SRC3_ADDR + idx,
> cfg->layout.plane_addr[2]);
> }
> +
> + if (pipe->multirect_index == DPU_SSPP_RECT_SOLO) {
> + ystride0 = (cfg->layout.plane_pitch[0]) |
> + (cfg->layout.plane_pitch[1] << 16);
> + ystride1 = (cfg->layout.plane_pitch[2]) |
> + (cfg->layout.plane_pitch[3] << 16);
> + } else {
> + ystride0 = DPU_REG_READ(&ctx->hw, SSPP_SRC_YSTRIDE0 + idx);
> + ystride1 = DPU_REG_READ(&ctx->hw, SSPP_SRC_YSTRIDE1 + idx);
> +
> + if (pipe->multirect_index == DPU_SSPP_RECT_0) {
> + ystride0 = (ystride0 & 0xFFFF0000) |
> + (cfg->layout.plane_pitch[0] & 0x0000FFFF);
> + ystride1 = (ystride1 & 0xFFFF0000)|
> + (cfg->layout.plane_pitch[2] & 0x0000FFFF);
> + } else {
> + ystride0 = (ystride0 & 0x0000FFFF) |
> + ((cfg->layout.plane_pitch[0] << 16) &
> + 0xFFFF0000);
> + ystride1 = (ystride1 & 0x0000FFFF) |
> + ((cfg->layout.plane_pitch[2] << 16) &
> + 0xFFFF0000);
> + }
> + }
> +
> + DPU_REG_WRITE(&ctx->hw, SSPP_SRC_YSTRIDE0 + idx, ystride0);
> + DPU_REG_WRITE(&ctx->hw, SSPP_SRC_YSTRIDE1 + idx, ystride1);
> }
>
> static void dpu_hw_sspp_setup_csc(struct dpu_hw_sspp *ctx,
More information about the dri-devel
mailing list