[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.0.8-QUINTUS-TABLET+ (quintus@hades) (gcc version 4.4.1 (GCC) ) #12 SMP PREEMPT Thu Aug 2 12:20:53 CEST 2012
[    0.000000] CPU: ARMv7 Processor [411fc093] revision 3 (ARMv7), cr=10c5387f
[    0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine: ARCHOS A101S board
[    0.000000] fixup_archos: 512M@0x80000000 from bootloader.
[    0.000000] fixup_archos: [mem=512M init=/linuxrc debug omapdss.debug=0 omapfb.debug=0]
[    0.000000] Product Name: A101S
[    0.000000] DDR type elpida
[    0.000000] Reserving 8388608 bytes SDRAM for VRAM
[    0.000000] Memory policy: ECC disabled, Data cache writealloc
[    0.000000] OMAP4430 ES2.3
[    0.000000] SRAM: Mapped pa 0x40300000 to va 0xfe400000 size: 0xd000
[    0.000000] On node 0 totalpages: 114688
[    0.000000] free_area_init_node: node 0, pgdat c080bee0, node_mem_map c0897000
[    0.000000]   Normal zone: 1024 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 113664 pages, LIFO batch:31
[    0.000000] PERCPU: Embedded 7 pages/cpu @c0c9d000 s7072 r8192 d13408 u32768
[    0.000000] pcpu-alloc: s7072 r8192 d13408 u32768 alloc=8*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 113664
[    0.000000] Kernel command line: mem=512M init=/linuxrc debug omapdss.debug=0 omapfb.debug=0
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 448MB = 448MB total
[    0.000000] Memory: 444428k/444428k available, 79860k reserved, 0K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     DMA     : 0xffc00000 - 0xffe00000   (   2 MB)
[    0.000000]     vmalloc : 0xe0800000 - 0xf8000000   ( 376 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xe0000000   ( 512 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .init : 0xc0008000 - 0xc0059000   ( 324 kB)
[    0.000000]       .text : 0xc0059000 - 0xc0795000   (7408 kB)
[    0.000000]       .data : 0xc0796000 - 0xc080ca40   ( 475 kB)
[    0.000000]        .bss : 0xc080ca64 - 0xc0896b28   ( 553 kB)
[    0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] NR_IRQS:410
[    0.000000] omap_hwmod: dpll_mpu_m2_ck: missing clockdomain for dpll_mpu_m2_ck.
[    0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz
[    0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
[    0.000000] Console: colour dummy device 80x30
[    0.000000] console [tty0] enabled
[    0.000640] Calibrating delay loop... 1990.38 BogoMIPS (lpj=7774208)
[    0.070404] pid_max: default: 32768 minimum: 301
[    0.070739] Mount-cache hash table entries: 512
[    0.070739] Initializing cgroup subsys debug
[    0.070739] Initializing cgroup subsys cpuacct
[    0.070739] Initializing cgroup subsys freezer
[    0.070739] CPU: Testing write buffer coherency: ok
[    0.072326] L310 cache controller enabled
[    0.072326] l2x0: 16 ways, CACHE_ID 0x410000c4, AUX_CTRL 0x5e470000, Cache size: 1048576 B
[    0.150756] CPU1: Booted secondary processor
[    0.220794] Brought up 2 CPUs
[    0.220825] SMP: Total of 2 processors activated (3989.17 BogoMIPS).
[    0.221069] devtmpfs: initialized
[    0.221069] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for emif_fw
[    0.221069] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l3_instr
[    0.221069] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l3_main_1
[    0.221069] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l3_main_2
[    0.223876] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_abe
[    0.223907] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_cfg
[    0.223907] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_per
[    0.223968] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_wkup
[    0.223968] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for mpu_private
[    0.223968] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for sl2if
[    0.223968] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for usbhs_ohci
[    0.223968] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for usbhs_ehci
[    0.223968] omap_hwmod: l3_div_ck: missing clockdomain for l3_div_ck.
[    0.232208] omap_hwmod: mcpdm: cannot be enabled (3)
[    0.234497] print_constraints: dummy: 
[    0.235107] NET: Registered protocol family 16
[    0.235290] GPMC revision 6.0
[    0.235290] gpmc_mem_init: cannot add 16777216@00000000
[    0.235290] EMIF0 is enabled with IRQ142
[    0.235290] EMIF1 is enabled with IRQ143
[    0.236480] Last reset was cold reset (PRM_RSTST=0x1)
[    0.236480] 
[    0.236755] OMAP GPIO hardware version 0.1
[    0.238372] omap_mux_init: Add partition: #1: core, flags: 2
[    0.238372] omap_mux_init: Add partition: #2: wkup, flags: 2
[    0.241180] archos_accel_init: irq1 205, irq2 334
[    0.241180] archos_compass_init: irq 211
[    0.243438] init_ehci_clock_init: auxclk4_ck now at 12000000
[    0.243438] Enabling aux_clk
[    0.250122] panel_auo_wxga_10_init
[    0.255981] OMAP DMA hardware revision 0.0
[    0.255981] omap_rproc_get_pool: carveout memory is unavailable: 0x0, 0x0
[    0.265502] bio: create slab <bio-0> at 0
[    0.266357] print_constraints: 5V: 5000 mV 
[    0.266357] print_constraints: 1V8: 1800 mV 
[    0.266357] print_constraints: VCC: 3300 mV 
[    0.266784] print_constraints: vbus_musb: 5000 mV 
[    0.266784] print_constraints: vmmc2: 1800 mV 
[    0.267425] print_constraints: vmmc2_aux: 3300 mV 
[    0.267425] print_constraints: TSP_VCC: 3300 mV 
[    0.267425] print_constraints: vwl1271: 1800 mV 
[    0.267822] print_constraints: hdmi_5v: 5000 mV normal 
[    0.268249] print_constraints: hsusb_ext: 5000 mV normal 
[    0.268249] i2c-core: driver [twl] using legacy suspend method
[    0.268249] i2c-core: driver [twl] using legacy resume method
[    0.268585] SCSI subsystem initialized
[    0.269653] usbcore: registered new interface driver usbfs
[    0.270080] usbcore: registered new interface driver hub
[    0.270172] usbcore: registered new device driver usb
[    0.271057] omap_i2c omap_i2c.1: bus 1 rev4.0 at 400 kHz
[    0.271057] Skipping twl internal clock init and using bootloader value (unknown osc rate)
[    0.271728] twl 1-0048: start condition : 01
[    0.275085] twl6030: PIH (irq 39) chaining IRQs 368..387
[    0.277313] print_constraints: VUSB: 3300 mV normal standby
[    0.279968] archos_twl6030_usb_xceiv archos_twl6030_usb_xceiv: Initialized Archos TWL6030 USB module
[    0.280395] STATE_UNKNOWN -> STATE_NONE
[    0.281250] print_constraints: VMMC: 1200 <--> 3000 mV at 1800 mV normal standby
[    0.282287] print_constraints: VPP: 1800 <--> 2500 mV at 1900 mV normal standby
[    0.283294] print_constraints: VCXIO: 1800 mV normal standby
[    0.284515] print_constraints: VDAC: 1800 mV normal standby
[    0.285339] print_constraints: VAUX2_6030: 2800 mV normal standby
[    0.286285] print_constraints: VAUX3_6030: 1000 <--> 3300 mV at 1200 mV normal standby
[    0.287414] print_constraints: VANA: 2100 mV normal standby
[    0.288238] print_constraints: CLK32KG: 
[    0.288574] omap_i2c omap_i2c.2: bus 2 rev4.0 at 100 kHz
[    0.288818] omap_i2c omap_i2c.3: bus 3 rev4.0 at 100 kHz
[    0.289184] omap_i2c omap_i2c.4: bus 4 rev4.0 at 400 kHz
[    0.289489] omap-rproc omap-rproc.0: dsp is available
[    0.290008] omap-rproc omap-rproc.1: ipu is available
[    0.290008] Advanced Linux Sound Architecture Driver Version 1.0.24.
[    0.290863] Bluetooth: Core ver 2.16
[    0.290863] NET: Registered protocol family 31
[    0.290954] Bluetooth: HCI device and connection manager initialized
[    0.290985] Bluetooth: HCI socket layer initialized
[    0.291015] Bluetooth: L2CAP socket layer initialized
[    0.291076] Bluetooth: SCO socket layer initialized
[    0.291076] Switching to clocksource 32k_counter
[    0.298919] Switched to NOHz mode on CPU #0
[    0.298919] Switched to NOHz mode on CPU #1
[    0.300903] musb-hdrc: version 6.0, musb-dma, otg (peripheral+host)
[    0.301239] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[    0.301269] musb-hdrc: MHDRC RTL version 2.0 
[    0.301300] musb-hdrc: setup fifo_mode 4
[    0.301300] musb-hdrc: 28/31 max ep, 16384/16384 memory
[    0.301574] musb-hdrc musb-hdrc: USB OTG mode controller at fc0ab000 using DMA, IRQ 124
[    0.301940] NET: Registered protocol family 2
[    0.302398] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.302398] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.303466] TCP bind hash table entries: 16384 (order: 6, 393216 bytes)
[    0.303466] TCP: Hash tables configured (established 16384 bind 16384)
[    0.303466] TCP reno registered
[    0.304504] UDP hash table entries: 256 (order: 2, 16384 bytes)
[    0.304504] UDP-Lite hash table entries: 256 (order: 2, 16384 bytes)
[    0.305114] NET: Registered protocol family 1
[    0.305450] RPC: Registered named UNIX socket transport module.
[    0.305450] RPC: Registered udp transport module.
[    0.305450] RPC: Registered tcp transport module.
[    0.305664] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.305664] Trying to unpack rootfs image as initramfs...
[    0.338378] Freeing initrd memory: 944K
[    0.717193] archos_usb_3g archos_usb_3g: Unable to get "3g_hub" regulator
[    0.717468] panel_init
[    0.718200] omap-iommu omap-iommu.0: ducati registered
[    0.718902] omap-iommu omap-iommu.1: tesla registered
[    0.728424] ashmem: initialized
[    0.729858] DCP detected
[    0.729888] STATE_NONE -> STATE_CHARGER
[    0.734039] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.736206] NTFS driver 2.1.30 [Flags: R/O].
[    0.737243] fuse init (API version 7.16)
[    0.737243] msgmni has been set to 869
[    0.739715] io scheduler noop registered
[    0.739746] io scheduler deadline registered
[    0.739746] io scheduler cfq registered (default)
[    0.739868] start plist test
[    0.742248] end plist test
[    0.746765] OMAP DSS rev 4.0
[    0.761932] HDMI TX OFF
[    0.763549] dsscomp: initializing.
[    0.763549] misc dsscomp: display0=generic_dpi_panel
[    0.763610] misc dsscomp: display1=hdmi_panel
[    0.763641] misc dsscomp: found 2 displays and 4 overlays
[    0.764038] omap-rproc omap-rproc.1: powering up ipu
[    0.764709] virtio_rpmsg_bus virtio0: rpmsg backend virtproc probed successfully
[    0.764709] virtio_rpmsg_bus virtio1: rpmsg backend virtproc probed successfully
[    0.764709] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 104) is a OMAP UART0
[    0.783660] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 105) is a OMAP UART1
[    0.822662] omap_uart.2: ttyO2 at MMIO 0x48020000 (irq = 106) is a OMAP UART2
[    0.858612] omap_ion_probe: adding heap secure_input of type 2 with 9c800000@80000
[    0.858612] omap_ion_probe: adding heap tiler of type 4 with 9c880000@80000
[    0.866821] brd: module loaded
[    0.869537] loop: module loaded
[    0.869537] (stk) :sysfs entries created
[    0.869537] (stk) : debugfs entries created 
[    0.878387] PPP generic driver version 2.4.2
[    0.879394] PPP Deflate Compression module registered
[    0.879394] PPP BSD Compression module registered
[    0.880157] PPP MPPE Compression module registered
[    0.880187] NET: Registered protocol family 24
[    0.880218] tun: Universal TUN/TAP device driver, 1.6
[    0.880218] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.880218] rtl8150: v0.6.2 (2004/08/27):rtl8150 based usb-ethernet driver
[    0.880218] usbcore: registered new interface driver rtl8150
[    0.880218] usbcore: registered new interface driver asix
[    0.880218] usbcore: registered new interface driver cdc_ether
[    0.882446] usbcore: registered new interface driver dm9601
[    0.882446] usbcore: registered new interface driver smsc75xx
[    0.882446] usbcore: registered new interface driver smsc95xx
[    0.882446] usbcore: registered new interface driver net1080
[    0.882751] usbcore: registered new interface driver cdc_subset
[    0.882873] usbcore: registered new interface driver zaurus
[    0.882873] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
[    0.883056] usbcore: registered new interface driver int51x1
[    0.883178] usbcore: registered new interface driver zd1201
[    0.883178] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.883544] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
[    0.883697] ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1
[    0.883697] ehci-omap ehci-omap.0: irq 109, io mem 0x4a064c00
[    0.895263] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
[    0.895385] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.895385] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.895446] usb usb1: Product: OMAP-EHCI Host Controller
[    0.895477] usb usb1: Manufacturer: Linux 3.0.8-QUINTUS-TABLET+ ehci_hcd
[    0.895477] usb usb1: SerialNumber: ehci-omap.0
[    0.896118] hub 1-0:1.0: USB hub found
[    0.896118] hub 1-0:1.0: 3 ports detected
[    0.924468] usbcore: registered new interface driver cdc_acm
[    0.924499] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    0.924499] Initializing USB Mass Storage driver...
[    0.924652] usbcore: registered new interface driver usb-storage
[    0.924682] USB Mass Storage support registered.
[    0.924682] usbcore: registered new interface driver libusual
[    0.924804] jm20329_platform_init: no device configuration for system_rev 5
[    0.925201] usbcore: registered new interface driver usbserial
[    0.925231] usbserial: USB Serial Driver core
[    0.926940] android_usb gadget: Mass Storage Function, version: 2009/09/11
[    0.926940] android_usb gadget: Number of LUNs=1
[    0.927001]  lun0: LUN: removable file: (no medium)
[    0.927032] android_usb gadget: android_usb ready
[    0.927032] musb-hdrc musb-hdrc: MUSB HDRC host driver
[    0.927032] musb-hdrc musb-hdrc: new USB bus registered, assigned bus number 2
[    0.927459] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.927490] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.927520] usb usb2: Product: MUSB HDRC host driver
[    0.927551] usb usb2: Manufacturer: Linux 3.0.8-QUINTUS-TABLET+ musb-hcd
[    0.927551] usb usb2: SerialNumber: musb-hdrc
[    0.928100] hub 2-0:1.0: USB hub found
[    0.928100] hub 2-0:1.0: 1 port detected
[    0.928100] mousedev: PS/2 mouse device common for all mice
[    0.928894] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[    0.929992] usbcore: registered new interface driver xpad
[    0.930725] twl6030_pwrbutton_probe: Enter
[    0.931121] input: twl6030_pwrbutton as /devices/platform/omap/omap_i2c.1/i2c-1/1-0049/twl6030_pwrbutton/input/input1
[    0.933288] Found MMA8453Q accelerometer with ID 0x3A
[    0.938690] input: MMA8453Q Accelerometer as /devices/virtual/input/input2
[    0.938690] i2c-core: driver [mma8453q] using legacy suspend method
[    0.939117] i2c-core: driver [mma8453q] using legacy resume method
[    0.939117] MMA8453Q driver version 0.1 (1 April 2011)
[    0.939178] AKM8975 compass driver: initialize
[    0.939849] input: compass as /devices/virtual/input/input3
[    0.939849] i2c-core: driver [akm8975] using legacy suspend method
[    0.940551] i2c-core: driver [akm8975] using legacy resume method
[    0.943725] using rtc device, twl_rtc, for alarms
[    0.944213] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
[    0.944458] i2c /dev entries driver
[    0.944458] lirc_dev: IR Remote Control driver registered, major 248 
[    0.944458] IR NEC protocol handler initialized
[    0.944458] IR RC5(x) protocol handler initialized
[    0.945343] IR RC6 protocol handler initialized
[    0.945373] IR JVC protocol handler initialized
[    0.945373] IR Sony protocol handler initialized
[    0.945373] IR RC5 (streamzap) protocol handler initialized
[    0.945373] IR LIRC bridge handler initialized
[    0.945465] Linux video capture interface: v2.00
[    0.945465] dmm: probe base: fd300000, irq 145
[    0.992736] twl6030_bci twl6030_bci: Battery Voltage at Bootup is 7 mV
[    0.993041] twl6030_bci twl6030_bci: Read 9 as cin_limit, set current to 500
[    1.007843] OMAP Watchdog Timer Rev 0x00: initial timeout 60 sec
[    1.008605] device-mapper: uevent: version 1.0.3
[    1.008605] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
[    1.008605] Bluetooth: Bluetooth Driver for TI WiLink - Version 1.0
[    1.010375] (stc): st_register(2) 
[    1.010375] (stc):  chnl_id list empty :2 
[    1.010406] (stk) : st_kim_start
[    1.010437] plat_kim_chip_enable
[    1.010620] cpuidle: using governor ladder
[    1.010620] cpuidle: using governor menu
[    1.015136] Registered led device: power
[    1.015533] omap_pwm_led omap_pwm_led.0: OMAP PWM LED (lcd-backlight) at GP timer 8/0
[    1.015655] Registered led device: lcd-backlight
[    1.019561] usbcore: registered new interface driver usbhid
[    1.019592] usbhid: USB HID core driver
[    1.019622] thermal_governor_dev_register:Adding omap_ondie_governor governor
[    1.019958] thermal_sensor_dev_register:Found cpu cpu
[    1.019989] thermal_sensor_dev_register:Adding omap443x_ondie_sensor sensor
[    1.033599] omap_configure_temp_sensor_thresholds -> 76 75  73000 71000
[    1.035827] omap_temp_sensor omap_temp_sensor.0: omap443x_ondie_sensor : 'omap_temp_sensor'
[    1.037078] usbcore: registered new interface driver snd-usb-audio
[    1.039611] archos_omap4_soc_probe: Archos Device SoC init
[    1.044616] twl6040-codec twl6040-codec: couldn't get VDDHF regulator -19
[    1.072387] asoc: null-codec-dai <-> MultiMedia1 mapping ok
[    1.081726] asoc: null-codec-dai <-> MultiMedia2 mapping ok
[    1.085296] asoc: null-codec-dai <-> Voice mapping ok
[    1.086395] asoc: null-codec-dai <-> Tones mapping ok
[    1.087493] asoc: null-codec-dai <-> Vibra mapping ok
[    1.088287] asoc: null-codec-dai <-> MODEM mapping ok
[    1.088958] asoc: null-codec-dai <-> MultiMedia1 LP mapping ok
[    1.090393] asoc: FM Digital <-> omap-mcbsp-dai.1 mapping ok
[    1.091491] asoc: twl6040-dl1 <-> mcpdm-dl mapping ok
[    1.093109] asoc: dmic-hifi <-> omap-dmic-dai-0 mapping ok
[    1.094665] twl6040-codec twl6040-codec: ASoC: Failed to create Aux/FM Stereo In debugfs file
[    1.095489] asoc: twl6040-dl1 <-> mcpdm-dl1 mapping ok
[    1.096343] asoc: twl6040-ul <-> mcpdm-ul1 mapping ok
[    1.097076] asoc: twl6040-dl2 <-> mcpdm-dl2 mapping ok
[    1.097778] asoc: twl6040-vib <-> mcpdm-vib mapping ok
[    1.098541] asoc: Bluetooth <-> omap-mcbsp-dai.0 mapping ok
[    1.099304] asoc: Bluetooth <-> omap-mcbsp-dai.0 mapping ok
[    1.100097] asoc: FM Digital <-> omap-mcbsp-dai.1 mapping ok
[    1.100860] asoc: MODEM <-> omap-mcbsp-dai.1 mapping ok
[    1.101562] asoc: dmic-hifi <-> omap-dmic-abe-dai-0 mapping ok
[    1.102325] asoc: dmic-hifi <-> omap-dmic-abe-dai-1 mapping ok
[    1.103027] asoc: dmic-hifi <-> omap-dmic-abe-dai-2 mapping ok
[    1.105712] input: ARCHOS-TWL6040 Headset Jack as /devices/platform/soc-audio/sound/card0/input4
[    1.109313] asoc: hdmi-audio-codec <-> hdmi-audio-dai mapping ok
[    1.109924] ALSA device list:
[    1.109924]   #0: Archos Board (TWL6040)
[    1.109954]   #1: OMAP4HDMI
[    1.110137] GACT probability NOT on
[    1.110168] Mirror/redirect action on
[    1.110198] u32 classifier
[    1.110198]     Actions configured
[    1.110229] Netfilter messages via NETLINK v0.30.
[    1.110321] nf_conntrack version 0.5.0 (6958 buckets, 27832 max)
[    1.111389] ctnetlink v0.93: registering with nfnetlink.
[    1.111450] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
[    1.111480] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
[    1.111907] xt_time: kernel timezone is -0000
[    1.113922] ip_tables: (C) 2000-2006 Netfilter Core Team
[    1.114166] arp_tables: (C) 2002 David S. Miller
[    1.114257] TCP cubic registered
[    1.115051] NET: Registered protocol family 10
[    1.116607] (stk) :ldisc_install = 1
[    1.117919] mmc0: new high speed MMC card at address 0001
[    1.118469] mmcblk0: mmc0:0001 MMC08G 6.94 GiB 
[    1.118652] mmcblk0boot0: mmc0:0001 MMC08G partition 1 128 KiB
[    1.118865] mmcblk0boot1: mmc0:0001 MMC08G partition 2 128 KiB
[    1.120544]  mmcblk0: p1 p2 p3 p4
[    1.123321]  mmcblk0boot1: unknown partition table
[    1.124481] Mobile IPv6
[    1.124572] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    1.124816] IPv6 over IPv4 tunneling driver
[    1.125152]  mmcblk0boot0: unknown partition table
[    1.133117] NET: Registered protocol family 17
[    1.133178] NET: Registered protocol family 15
[    1.133331] Bluetooth: RFCOMM TTY layer initialized
[    1.133392] Bluetooth: RFCOMM socket layer initialized
[    1.133392] Bluetooth: RFCOMM ver 1.11
[    1.133422] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    1.133453] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    1.133605] NET: Registered protocol family 35
[    1.133972] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[    1.134063] ThumbEE CPU extension supported.
[    1.134094] Registering SWP/SWPB emulation handler
[    1.142028] Reprogramming LPDDR2 timings to 400000000 Hz
[    1.150848] sr_init: No PMIC hook to init smartreflex
[    1.151123] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized
[    1.151306] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized
[    1.151489] smartreflex smartreflex.2: omap_sr_probe: SmartReflex driver initialized
[    1.151794] SmartReflex class 1.5 driver: initialized (86400000ms)
[    1.152404] thermal_cooling_dev_register:Found cpu cpu
[    1.152435] Power Management for TI OMAP4.
[    1.152648] OMAP4 PM: Static dependency added between MPUSS <-> EMIF, MPUSS <-> L4_PER/CFG MPUSS <-> L3_MAIN_1.
[    1.152679] OMAP4 PM: Static dependency added between DUCATI <-> L4_PER/CFG and DUCATI <-> L3.
[    1.159851] clock: disabling unused clocks to save power
[    1.221160] usb 1-1: new high speed USB device number 2 using ehci-omap
[    1.242309] mmc2: card claims to support voltages below the defined range. These will be ignored.
[    1.245300] cannot apply mgr(lcd2) on inactive device
[    1.268096] sr_class1p5_calib_work: core: Calibration complete: Voltage Nominal=1127000Calib=1050820 margin=0
[    1.268188] sr_class1p5_calib_work: mpu: Calibration complete: Voltage Nominal=1025000Calib=900000 margin=0
[    1.277832] mmc2: queuing unknown CIS tuple 0x91 (3 bytes)
[    1.279693] mmc2: new SDIO card at address 0001
[    1.288208] Console: switching to colour frame buffer device 160x50
[    1.302734] cannot apply mgr(lcd) on inactive device
[    1.302917] omapfb omapfb: failed to apply dispc config
[    1.303070] cannot apply mgr(tv) on inactive device
[    1.303253] omapfb omapfb: failed to apply dispc config
[    1.303375] cannot apply mgr(lcd2) on inactive device
[    1.303558] omapfb omapfb: failed to apply dispc config
[    1.398651] omapdss DPI: Could not find exact pixel clock. Requested 68930 kHz, got 68929 kHz
[    1.399536] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608
[    1.399688] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    1.399841] usb 1-1: Product: USB2.0 Hub
[    1.400665] hub 1-1:1.0: USB hub found
[    1.402038] panel_enable [wxga10]
[    1.402404] hub 1-1:1.0: 4 ports detected
[    1.662567] twl_rtc twl_rtc: setting system clock to 2012-08-02 20:45:24 UTC (1343940324)
[    1.664581] Freeing init memory: 324K
[    1.690307] usb 1-1.1: new low speed USB device number 3 using ehci-omap
[    1.698303] omapfb omapfb: Unknown ioctl 0x5401
[    1.705932] sr_class1p5_calib_work: iva: Calibration complete: Voltage Nominal=1114000Calib=1063480 margin=0
[    1.760192] sr_class1p5_calib_work: mpu: Calibration complete: Voltage Nominal=1388000Calib=1210000 margin=0
[    1.822662] usb 1-1.1: New USB device found, idVendor=046d, idProduct=c03d
[    1.828155] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.833709] usb 1-1.1: Product: USB-PS/2 Optical Mouse
[    1.839324] usb 1-1.1: Manufacturer: Logitech
[    1.850311] input: Logitech USB-PS/2 Optical Mouse as /devices/platform/omap/usbhs_omap/ehci-omap.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input5
[    1.857879] generic-usb 0003:046D:C03D.0001: input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-ehci-omap.0-1.1/input0
[    1.948242] usb 1-1.2: new high speed USB device number 4 using ehci-omap
[    2.088745] usb 1-1.2: New USB device found, idVendor=0930, idProduct=6545
[    2.108245] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.127746] usb 1-1.2: Product: DataTraveler G3 
[    2.133605] usb 1-1.2: Manufacturer: Kingston
[    2.139282] usb 1-1.2: SerialNumber: 0013729B67AEBA60561015F6
[    2.145690] scsi0 : usb-storage 1-1.2:1.0
[    2.237274] usb 1-1.3: new low speed USB device number 5 using ehci-omap
[    2.270263] (stk) :ldisc installation timeout
[    2.270263] (stk) :ldisc_install = 0
[    2.375335] usb 1-1.3: New USB device found, idVendor=04f3, idProduct=0103
[    2.411712] usb 1-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.437561] input: HID 04f3:0103 as /devices/platform/omap/usbhs_omap/ehci-omap.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input6
[    2.457427] generic-usb 0003:04F3:0103.0002: input: USB HID v1.10 Keyboard [HID 04f3:0103] on usb-ehci-omap.0-1.3/input0
[    2.482513] input: HID 04f3:0103 as /devices/platform/omap/usbhs_omap/ehci-omap.0/usb1/1-1/1-1.3/1-1.3:1.1/input/input7
[    2.502899] generic-usb 0003:04F3:0103.0003: input: USB HID v1.10 Device [HID 04f3:0103] on usb-ehci-omap.0-1.3/input1
[    3.057403] omap_set_thresholds 72 48  65000 25000
[    3.127410] sr_class1p5_calib_work: mpu: Calibration complete: Voltage Nominal=1325000Calib=1120000 margin=0
[    3.152923] scsi 0:0:0:0: Direct-Access     Kingston DataTraveler G3  PMAP PQ: 0 ANSI: 0 CCS
[    3.175689] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    3.181640] sd 0:0:0:0: [sda] 7827456 512-byte logical blocks: (4.00 GB/3.73 GiB)
[    3.188110] sd 0:0:0:0: [sda] Write Protect is off
[    3.188110] sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00
[    3.201049] sd 0:0:0:0: [sda] No Caching mode page present
[    3.207031] sd 0:0:0:0: [sda] Assuming drive cache: write through
[    3.218078] sd 0:0:0:0: [sda] No Caching mode page present
[    3.225250] sd 0:0:0:0: [sda] Assuming drive cache: write through
[    3.234008]  sda: sda1
[    3.246948] sd 0:0:0:0: [sda] No Caching mode page present
[    3.256927] sd 0:0:0:0: [sda] Assuming drive cache: write through
[    3.276031] sd 0:0:0:0: [sda] Attached SCSI removable disk
[    3.434326] (stk) : timed out waiting for ldisc to be un-installed
[    3.434326] plat_kim_chip_disable
[    3.473785] plat_kim_chip_enable
[    3.583557] (stk) :ldisc_install = 1
[    4.736785] (stk) :ldisc installation timeout
[    4.755157] (stk) :ldisc_install = 0
[    5.924346] (stk) : timed out waiting for ldisc to be un-installed
[    5.942718] plat_kim_chip_disable
[    5.980438] plat_kim_chip_enable
[    6.088287] (stk) :ldisc_install = 1
[    7.236816] (stk) :ldisc installation timeout
[    7.254302] (stk) :ldisc_install = 0
[    8.424285] (stk) : timed out waiting for ldisc to be un-installed
[    8.443542] plat_kim_chip_disable
[    8.476928] plat_kim_chip_enable
[    8.585998] (stk) :ldisc_install = 1
[    9.731262] (stk) :ldisc installation timeout
[    9.747802] (stk) :ldisc_install = 0
[   10.916503] (stk) : timed out waiting for ldisc to be un-installed
[   10.934020] plat_kim_chip_disable
[   10.963745] plat_kim_chip_enable
[   11.070373] (stk) :ldisc_install = 1
[   11.854370] EXT4-fs (sda1): couldn't mount as ext3 due to feature incompatibilities
[   11.909973] EXT4-fs (sda1): couldn't mount as ext2 due to feature incompatibilities
[   11.964202] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: 
[   12.221923] (stk) :ldisc installation timeout
[   12.222351] (stk) :ldisc_install = 0
[   13.014373] EXT4-fs (sda1): re-mounted. Opts: user_xattr,barrier=1,data=ordered
[   13.372406] systemd-udevd[162]: starting version 187
[   13.393066] (stk) : timed out waiting for ldisc to be un-installed
[   13.395080] plat_kim_chip_disable
[   13.395141] plat_kim_chip_enable
[   13.515045] (stk) :ldisc_install = 1
[   13.856964] omap-rproc omap-rproc.1: rproc_loader_cont: failed to load ducati-m3.bin
[   14.094146] cfg80211: Calling CRDA to update world regulatory domain
[   14.682098] (stk) :ldisc installation timeout
[   14.682250] (stk) :ldisc_install = 0
[   14.714965] (stc): st_register(8) 
[   14.736816] (stc):  ST_REG_IN_PROGRESS:8 
[   14.744201] (stc): add_channel_to_table: id 8
[   15.775878] sr_class1p5_calib_work: mpu: Calibration complete: Voltage Nominal=1200000Calib=1060000 margin=0
[   15.840576] (stk) : timed out waiting for ldisc to be un-installed
[   15.843139] plat_kim_chip_disable
[   15.873199] (stc):  KIM failure complete callback 
[   15.873199] (stc):  st_reg_complete 
[   15.877929] fmdrv: ST reg comp CB called with error status 146
[   15.886932] (stc): protocol 8's cb sent 146
[   15.887451] Bluetooth: st_register failed -22
[   15.896026] fmdrv: Unable to prepare FM CORE
[   15.989776] wl1271: loaded
[   15.994873] wl1271: initialized
[   16.496032] EXT4-fs (sda1): re-mounted. Opts: user_xattr,barrier=1,data=ordered
[   21.446136] wl1271: firmware booted (Rev 6.1.5.50.74)
[   21.461090] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   29.330535] wl1271: down
[   30.003356] wl1271: firmware booted (Rev 6.1.5.50.74)
[   30.009399] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   39.303741] ifb0: no IPv6 routers present
[   67.432159] wl1271: down
[   68.113342] wl1271: firmware booted (Rev 6.1.5.50.74)
[   68.121582] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   68.348449] wl1271: down
[   69.038299] wl1271: firmware booted (Rev 6.1.5.50.74)
[   69.046783] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   73.214385] wlan0: authenticate with 00:24:fe:a2:a7:02 (try 1)
[   73.226745] wlan0: authenticated
[   73.235443] wlan0: associate with 00:24:fe:a2:a7:02 (try 1)
[   73.251922] wlan0: RX AssocResp from 00:24:fe:a2:a7:02 (capab=0x411 status=0 aid=4)
[   73.251922] wlan0: associated
[   73.278320] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   73.305786] wl1271: Association completed.
[   77.268127] ifb0: no IPv6 routers present
[   83.439880] wlan0: no IPv6 routers present
[  125.721588] pixcir_i2c_tsp 4-005c: ping ? (5)
[  125.791625] pixcir_i2c_tsp 4-005c: ping ? (4)
[  125.861968] pixcir_i2c_tsp 4-005c: ping ? (3)
[  125.932312] pixcir_i2c_tsp 4-005c: ping ? (2)
[  125.997070] pixcir_i2c_tsp 4-005c: ping ? (1)
[  126.072967] pixcir_i2c_tsp 4-005c: ping ? (0)
[  126.143218] pixcir_startup_sequence : got 0xda (-121)
[  126.157348] pixcir_i2c_tsp 4-005c: could not talk to tsp boot.)
[  126.426757] pixcir_i2c_tsp 4-005c: ping ? (5)
[  126.502868] pixcir_i2c_tsp 4-005c: ping ? (4)
[  126.572937] pixcir_i2c_tsp 4-005c: ping ? (3)
[  126.648620] pixcir_i2c_tsp 4-005c: ping ? (2)
[  126.708007] pixcir_i2c_tsp 4-005c: ping ? (1)
[  126.783905] pixcir_i2c_tsp 4-005c: ping ? (0)
[  126.858551] pixcir_startup_sequence : got 0xda (-121)
[  126.863098] pixcir_i2c_tsp 4-005c: could not talk to tsp boot.)
[  126.979003] pixcir_i2c_tsp 4-005c: pixcir_cycle_and_startup_sequence: failed, abort.
[  126.993072] pixcir_i2c_tsp 4-005c: could not detect tsp in boot mode.
[  127.440307] pixcir_startup_sequence : got 0x00 (1)
[  127.457031] <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[  127.461029] <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[  127.461059] <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ff  ................
[  127.469757] <3>04 1f 03 00 18 00 00 00 00 00 00 43 6f 41 73 69  ...........CoAsi
[  127.469757] <3>61 31 30 70 31 5f 4d 34 30 31 31 36 37 35 32 00  a10p1_M40116752.
[  127.483673] <3>00 00 56 33 2e 30 30 00 00 2a 1b ff 00 00 00 00  ..V3.00..*......
[  127.490844] <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[  127.495147] <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[  127.499084] <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[  127.503509] <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[  127.503509] <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[  127.511383] <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[  127.515045] <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[  127.518981] <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[  127.519012] <3>00 00 00 00 00 00 00 00 00 00 00 00 6c 03 ed 01  ............l...
[  127.526367] <3>00 02 04 00 00 00 00 ff 00 00 00 00 00 00 00     ...............
[  127.529998] pixcir_i2c_tsp 4-005c: M45!
[  127.598754] pixcir_i2c_tsp 4-005c: x_min/max : 0/1280 - y_min/max : 0/800
[  127.611694] input: pixcir_i2c_tsp as /devices/virtual/input/input8
[  142.040588] panel_disable [wxga10]
[  143.002349] panel_enable [wxga10]
[  838.115631] SOC timeout
[ 1039.049987] wl1271: No ack to nullfunc from AP.
[ 1039.050354] wlan0: Connection to AP 00:24:fe:a2:a7:02 lost.
[ 1039.433746] cfg80211: Calling CRDA to update world regulatory domain
[ 1040.348846] wl1271: down
[ 1041.029571] wl1271: firmware booted (Rev 6.1.5.50.74)
[ 1041.037292] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1041.151153] wl1271: down
[ 1050.252410] ifb0: no IPv6 routers present
[ 1078.035064] wl1271: firmware booted (Rev 6.1.5.50.74)
[ 1078.041442] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1078.205535] wl1271: down
[ 1078.871734] wl1271: firmware booted (Rev 6.1.5.50.74)
[ 1078.878570] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1079.135314] wl1271: down
[ 1079.878692] wl1271: firmware booted (Rev 6.1.5.50.74)
[ 1079.884613] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1082.603332] wlan0: authenticate with 00:24:fe:a2:a7:02 (try 1)
[ 1082.608276] wlan0: authenticated
[ 1082.653381] wlan0: associate with 00:24:fe:a2:a7:02 (try 1)
[ 1082.658996] wlan0: RX AssocResp from 00:24:fe:a2:a7:02 (capab=0x411 status=0 aid=4)
[ 1082.658996] wlan0: associated
[ 1082.693054] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 1082.709228] wl1271: Association completed.
[ 1088.064849] ifb0: no IPv6 routers present
[ 1093.692108] wlan0: no IPv6 routers present
[ 2079.082427] usb 1-1.1: USB disconnect, device number 3
[ 2947.667053] usb 1-1.1: new low speed USB device number 6 using ehci-omap
[ 2947.789947] usb 1-1.1: New USB device found, idVendor=046d, idProduct=c03d
[ 2947.790100] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2947.790100] usb 1-1.1: Product: USB-PS/2 Optical Mouse
[ 2947.790100] usb 1-1.1: Manufacturer: Logitech
[ 2947.804748] input: Logitech USB-PS/2 Optical Mouse as /devices/platform/omap/usbhs_omap/ehci-omap.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input9
[ 2947.805511] generic-usb 0003:046D:C03D.0004: input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-ehci-omap.0-1.1/input0
[ 3035.235076] usb 1-1.1: USB disconnect, device number 6
[ 3094.096832] usb 1-1.1: new low speed USB device number 7 using ehci-omap
[ 3094.219696] usb 1-1.1: New USB device found, idVendor=046d, idProduct=c03d
[ 3094.219757] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3094.219848] usb 1-1.1: Product: USB-PS/2 Optical Mouse
[ 3094.219848] usb 1-1.1: Manufacturer: Logitech
[ 3094.230651] input: Logitech USB-PS/2 Optical Mouse as /devices/platform/omap/usbhs_omap/ehci-omap.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input10
[ 3094.231811] generic-usb 0003:046D:C03D.0005: input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-ehci-omap.0-1.1/input0
[ 3231.584991] usb 1-1.1: USB disconnect, device number 7
[ 3295.565429] usb 1-1.1: new high speed USB device number 8 using ehci-omap
[ 3295.686920] usb 1-1.1: New USB device found, idVendor=1307, idProduct=0165
[ 3295.686981] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3295.686981] usb 1-1.1: Product: Intenso Rainbow Line
[ 3295.686981] usb 1-1.1: Manufacturer: USBest Technology
[ 3295.686981] usb 1-1.1: SerialNumber: 10091300072180
[ 3295.699340] scsi1 : usb-storage 1-1.1:1.0
[ 3296.699310] scsi 1:0:0:0: Direct-Access     Intenso  Rainbow          0.00 PQ: 0 ANSI: 2
[ 3296.701385] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 3296.705932] sd 1:0:0:0: [sdb] 30468303 512-byte logical blocks: (15.5 GB/14.5 GiB)
[ 3296.707000] sd 1:0:0:0: [sdb] Write Protect is off
[ 3296.707000] sd 1:0:0:0: [sdb] Mode Sense: 00 00 00 00
[ 3296.707946] sd 1:0:0:0: [sdb] Asking for cache data failed
[ 3296.708007] sd 1:0:0:0: [sdb] Assuming drive cache: write through
[ 3296.716644] sd 1:0:0:0: [sdb] Asking for cache data failed
[ 3296.716735] sd 1:0:0:0: [sdb] Assuming drive cache: write through
[ 3297.088989]  sdb: sdb1
[ 3297.102722] sd 1:0:0:0: [sdb] Asking for cache data failed
[ 3297.102722] sd 1:0:0:0: [sdb] Assuming drive cache: write through
[ 3297.102813] sd 1:0:0:0: [sdb] Attached SCSI removable disk
[ 3305.042053] usb 1-1.4: new low speed USB device number 9 using ehci-omap
[ 3305.167419] usb 1-1.4: New USB device found, idVendor=046d, idProduct=c03d
[ 3305.167510] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3305.167510] usb 1-1.4: Product: USB-PS/2 Optical Mouse
[ 3305.167572] usb 1-1.4: Manufacturer: Logitech
[ 3305.182617] input: Logitech USB-PS/2 Optical Mouse as /devices/platform/omap/usbhs_omap/ehci-omap.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input11
[ 3305.185882] generic-usb 0003:046D:C03D.0006: input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-ehci-omap.0-1.4/input0
[ 3317.493957] EXT4-fs (sdb1): mounting ext3 file system using the ext4 subsystem
[ 3317.508209] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
