[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.0.4 (root@localhost) (gcc version 4.4.4 (GCC) ) #7 SMP Fri Nov 11 17:20:54 MST 2011 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003ffb0000 (usable) [ 0.000000] BIOS-e820: 000000003ffb0000 - 000000003ffc0000 (ACPI data) [ 0.000000] BIOS-e820: 000000003ffc0000 - 000000003fff0000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved) [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! [ 0.000000] DMI 2.3 present. [ 0.000000] DMI: System manufacturer System Product Name/A8V, BIOS 0229 05/29/2007 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0x3ffb0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FFC0000000 write-back [ 0.000000] 1 base 00D0000000 mask FFF0000000 write-combining [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] found SMP MP-table at [c00ff780] ff780 [ 0.000000] initial memory mapped : 0 - 01c00000 [ 0.000000] Base memory trampoline at [c009a000] 9a000 size 16384 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000 [ 0.000000] RAMDISK: 00eaa000 - 00f00000 [ 0.000000] ACPI: RSDP 000fa810 00014 (v00 ACPIAM) [ 0.000000] ACPI: RSDT 3ffb0000 00030 (v01 A M I OEMRSDT 05000729 MSFT 00000097) [ 0.000000] ACPI: FACP 3ffb0200 00081 (v01 A M I OEMFACP 05000729 MSFT 00000097) [ 0.000000] ACPI: DSDT 3ffb03f0 0391B (v01 A0277 A0277001 00000001 MSFT 0100000D) [ 0.000000] ACPI: FACS 3ffc0000 00040 [ 0.000000] ACPI: APIC 3ffb0390 00052 (v01 A M I OEMAPIC 05000729 MSFT 00000097) [ 0.000000] ACPI: OEMB 3ffc0040 0003F (v01 A M I OEMBIOS 05000729 MSFT 00000097) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 135MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0003ffb0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0003ffb0 [ 0.000000] On node 0 totalpages: 261951 [ 0.000000] free_area_init_node: node 0, pgdat c16e2880, node_mem_map f6ffd200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 272 pages used for memmap [ 0.000000] HighMem zone: 34466 pages, LIFO batch:7 [ 0.000000] Using APIC driver default [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000 [ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:bf780000) [ 0.000000] setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 11 pages/cpu @f6800000 s23872 r0 d21184 u2097152 [ 0.000000] pcpu-alloc: s23872 r0 d21184 u2097152 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259903 [ 0.000000] Kernel command line: auto BOOT_IMAGE=3.0.4 ro root=2209 irqpoll [ 0.000000] Misrouted IRQ fixup and polling support enabled [ 0.000000] This may significantly impact system performance [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (000377fe:0003ffb0) [ 0.000000] Memory: 1030344k/1048256k available (5241k kernel code, 17460k reserved, 1843k data, 404k init, 138952k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff8f000 - 0xfffff000 ( 448 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc16ec000 - 0xc1751000 ( 404 kB) [ 0.000000] .data : 0xc151e577 - 0xc16eb500 (1843 kB) [ 0.000000] .text : 0xc1000000 - 0xc151e577 (5241 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:512 16 [ 0.000000] CPU 0 irqstacks, hard=f6408000 soft=f640a000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2202.367 MHz processor. [ 0.000000] Marking TSC unstable due to TSCs unsynchronized [ 0.001078] Calibrating delay loop (skipped), value calculated using timer frequency.. 4404.73 BogoMIPS (lpj=2202367) [ 0.001230] pid_max: default: 32768 minimum: 301 [ 0.001327] Security Framework initialized [ 0.001421] Mount-cache hash table entries: 512 [ 0.001650] Initializing cgroup subsys cpuacct [ 0.001729] Initializing cgroup subsys freezer [ 0.001828] CPU: Physical Processor ID: 0 [ 0.002003] CPU: Processor Core ID: 0 [ 0.002077] mce: CPU supports 5 MCE banks [ 0.002244] ACPI: Core revision 20110413 [ 0.004065] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.004956] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 [ 0.015153] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ stepping 02 [ 0.015998] Performance Events: AMD PMU driver. [ 0.015998] ... version: 0 [ 0.015998] ... bit width: 48 [ 0.015998] ... generic registers: 4 [ 0.015998] ... value mask: 0000ffffffffffff [ 0.015998] ... max period: 00007fffffffffff [ 0.015998] ... fixed-purpose events: 0 [ 0.015998] ... event mask: 000000000000000f [ 0.015998] MCE: In-kernel MCE decoding enabled. [ 0.015998] CPU 1 irqstacks, hard=f6472000 soft=f6474000 [ 0.015998] Booting Node 0, Processors #1 Ok. [ 0.016001] smpboot cpu 1: start_ip = 9a000 [ 0.001999] Initializing CPU#1 [ 0.087060] Brought up 2 CPUs [ 0.087204] Total of 2 processors activated (8809.73 BogoMIPS). [ 0.088092] PM: Registering ACPI NVS region at 3ffc0000 (196608 bytes) [ 0.088163] Time: 1:07:45 Date: 11/12/11 [ 0.088272] NET: Registered protocol family 16 [ 0.089022] node 0 link 0: io port [1000, ffffff] [ 0.089022] TOM: 0000000040000000 aka 1024M [ 0.089080] node 0 link 0: mmio [a0000, bffff] [ 0.089084] node 0 link 0: mmio [40000000, ffffffff] [ 0.089087] bus: [00, ff] on node 0 link 0 [ 0.089090] bus: 00 index 0 [io 0x0000-0xffff] [ 0.089092] bus: 00 index 1 [mem 0x000a0000-0x000bffff] [ 0.089095] bus: 00 index 2 [mem 0x40000000-0xffffffff] [ 0.089100] ACPI: bus type pci registered [ 0.090368] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1 [ 0.090445] PCI: Using configuration type 1 for base access [ 0.097025] bio: create slab at 0 [ 0.097478] ACPI: EC: Look up EC in DSDT [ 0.098508] ACPI: Executed 1 blocks of module-level executable AML code [ 0.100237] ACPI: Interpreter enabled [ 0.100314] ACPI: (supports S0 S1 S3 S4 S5) [ 0.100606] ACPI: Using IOAPIC for interrupt routing [ 0.106021] ACPI: No dock devices found. [ 0.106097] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.106269] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.106384] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 0.106384] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) [ 0.106384] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.106384] pci_root PNP0A03:00: host bridge window [mem 0x40000000-0xffffffff] (ignored) [ 0.106384] pci 0000:00:00.0: [1106:0282] type 0 class 0x000600 [ 0.106384] pci 0000:00:00.0: reg 10: [mem 0xd0000000-0xdfffffff pref] [ 0.106384] pci 0000:00:00.1: [1106:1282] type 0 class 0x000600 [ 0.106384] pci 0000:00:00.2: [1106:2282] type 0 class 0x000600 [ 0.106384] pci 0000:00:00.3: [1106:3282] type 0 class 0x000600 [ 0.106384] pci 0000:00:00.4: [1106:4282] type 0 class 0x000600 [ 0.106384] pci 0000:00:00.7: [1106:7282] type 0 class 0x000600 [ 0.106384] pci 0000:00:01.0: [1106:b188] type 1 class 0x000604 [ 0.106384] pci 0000:00:01.0: supports D1 [ 0.106404] pci 0000:00:0a.0: [11ab:4320] type 0 class 0x000200 [ 0.106421] pci 0000:00:0a.0: reg 10: [mem 0xfb700000-0xfb703fff] [ 0.106430] pci 0000:00:0a.0: reg 14: [io 0x9000-0x90ff] [ 0.106462] pci 0000:00:0a.0: reg 30: [mem 0xfb600000-0xfb61ffff pref] [ 0.106482] pci 0000:00:0a.0: supports D1 D2 [ 0.106484] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.106489] pci 0000:00:0a.0: PME# disabled [ 0.106507] pci 0000:00:0b.0: [1002:4752] type 0 class 0x000300 [ 0.106523] pci 0000:00:0b.0: reg 10: [mem 0xfa000000-0xfaffffff] [ 0.106533] pci 0000:00:0b.0: reg 14: [io 0x8000-0x80ff] [ 0.106542] pci 0000:00:0b.0: reg 18: [mem 0xfb900000-0xfb900fff] [ 0.106573] pci 0000:00:0b.0: reg 30: [mem 0xfb800000-0xfb81ffff pref] [ 0.106997] pci 0000:00:0b.0: supports D1 D2 [ 0.107015] pci 0000:00:0e.0: [105a:4d68] type 0 class 0x000180 [ 0.107029] pci 0000:00:0e.0: reg 10: [io 0xa800-0xa807] [ 0.107038] pci 0000:00:0e.0: reg 14: [io 0xa400-0xa403] [ 0.107046] pci 0000:00:0e.0: reg 18: [io 0xa000-0xa007] [ 0.107055] pci 0000:00:0e.0: reg 1c: [io 0x9800-0x9803] [ 0.107063] pci 0000:00:0e.0: reg 20: [io 0x9400-0x940f] [ 0.107072] pci 0000:00:0e.0: reg 24: [mem 0xfbb00000-0xfbb03fff] [ 0.107080] pci 0000:00:0e.0: reg 30: [mem 0xfba00000-0xfba03fff pref] [ 0.107097] pci 0000:00:0e.0: supports D1 [ 0.107112] pci 0000:00:0f.0: [1106:3149] type 0 class 0x000104 [ 0.107127] pci 0000:00:0f.0: reg 10: [io 0xc800-0xc807] [ 0.107136] pci 0000:00:0f.0: reg 14: [io 0xc400-0xc403] [ 0.107144] pci 0000:00:0f.0: reg 18: [io 0xc000-0xc007] [ 0.107153] pci 0000:00:0f.0: reg 1c: [io 0xb800-0xb803] [ 0.107162] pci 0000:00:0f.0: reg 20: [io 0xb400-0xb40f] [ 0.107171] pci 0000:00:0f.0: reg 24: [io 0xb000-0xb0ff] [ 0.107208] pci 0000:00:0f.1: [1106:0571] type 0 class 0x000101 [ 0.107248] pci 0000:00:0f.1: reg 20: [io 0xfc00-0xfc0f] [ 0.107296] pci 0000:00:10.0: [1106:3038] type 0 class 0x000c03 [ 0.107331] pci 0000:00:10.0: reg 20: [io 0xd000-0xd01f] [ 0.107356] pci 0000:00:10.0: supports D1 D2 [ 0.107358] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.107363] pci 0000:00:10.0: PME# disabled [ 0.107377] pci 0000:00:10.1: [1106:3038] type 0 class 0x000c03 [ 0.107412] pci 0000:00:10.1: reg 20: [io 0xd400-0xd41f] [ 0.107437] pci 0000:00:10.1: supports D1 D2 [ 0.107439] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.107443] pci 0000:00:10.1: PME# disabled [ 0.107459] pci 0000:00:10.4: [1106:3104] type 0 class 0x000c03 [ 0.107472] pci 0000:00:10.4: reg 10: [mem 0xfbd00000-0xfbd000ff] [ 0.107519] pci 0000:00:10.4: supports D1 D2 [ 0.107521] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold [ 0.107525] pci 0000:00:10.4: PME# disabled [ 0.107543] pci 0000:00:11.0: [1106:3227] type 0 class 0x000601 [ 0.107595] HPET not enabled in BIOS. You might try hpet=force boot option [ 0.107676] pci 0000:00:11.0: Enabled onboard AC97/MC97 devices [ 0.107783] pci 0000:00:11.5: [1106:3059] type 0 class 0x000401 [ 0.107798] pci 0000:00:11.5: reg 10: [io 0xd800-0xd8ff] [ 0.107851] pci 0000:00:11.5: supports D1 D2 [ 0.107867] pci 0000:00:11.6: [1106:3068] type 0 class 0x000780 [ 0.107882] pci 0000:00:11.6: reg 10: [io 0x0000-0x00ff] [ 0.107951] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600 [ 0.107967] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600 [ 0.107980] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600 [ 0.107998] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600 [ 0.108017] PCI: peer root bus 00 res updated from pci conf [ 0.108045] pci 0000:01:00.0: [1002:5961] type 0 class 0x000300 [ 0.108056] pci 0000:01:00.0: reg 10: [mem 0xe0000000-0xefffffff pref] [ 0.108062] pci 0000:01:00.0: reg 14: [io 0xe000-0xe0ff] [ 0.108069] pci 0000:01:00.0: reg 18: [mem 0xfbf00000-0xfbf0ffff] [ 0.108086] pci 0000:01:00.0: reg 30: [mem 0xfbe00000-0xfbe1ffff pref] [ 0.108099] pci 0000:01:00.0: supports D1 D2 [ 0.108123] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.108199] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.108204] pci 0000:00:01.0: bridge window [mem 0xfbe00000-0xfbffffff] [ 0.108208] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf9ffffff pref] [ 0.108215] pci_bus 0000:00: on NUMA node 0 [ 0.108219] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.108379] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x18) [ 0.113200] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 14 15) [ 0.113541] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 14 15) [ 0.114453] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11 14 15) [ 0.114961] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 7 10 11 14 15) [ 0.115454] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. [ 0.116090] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. [ 0.116708] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. [ 0.117320] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. [ 0.118023] vgaarb: device added: PCI:0000:00:0b.0,decodes=io+mem,owns=none,locks=none [ 0.118114] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.118220] vgaarb: loaded [ 0.118292] vgaarb: bridge control possible 0000:01:00.0 [ 0.118368] vgaarb: bridge control possible 0000:00:0b.0 [ 0.118530] SCSI subsystem initialized [ 0.118530] libata version 3.00 loaded. [ 0.118530] usbcore: registered new interface driver usbfs [ 0.119012] usbcore: registered new interface driver hub [ 0.119079] usbcore: registered new device driver usb [ 0.119085] Advanced Linux Sound Architecture Driver Version 1.0.24. [ 0.119097] PCI: Using ACPI for IRQ routing [ 0.119097] PCI: pci_cache_line_size set to 64 bytes [ 0.119130] reserve RAM buffer: 000000000009fc00 - 000000000009ffff [ 0.119133] reserve RAM buffer: 000000003ffb0000 - 000000003fffffff [ 0.119159] NetLabel: Initializing [ 0.119991] NetLabel: domain hash size = 128 [ 0.120065] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.120151] NetLabel: unlabeled traffic allowed by default [ 0.120301] pnp: PnP ACPI init [ 0.120301] ACPI: bus type pnp registered [ 0.120301] pnp 00:00: [bus 00-ff] [ 0.120301] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.120301] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.120301] pnp 00:00: [io 0x0d00-0xffff window] [ 0.120301] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.120301] pnp 00:00: [mem 0x00000000 window] [ 0.120301] pnp 00:00: [mem 0x40000000-0xffffffff window] [ 0.120301] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.120301] pnp 00:01: [dma 4] [ 0.120301] pnp 00:01: [io 0x0000-0x000f] [ 0.120301] pnp 00:01: [io 0x0081-0x0083] [ 0.120301] pnp 00:01: [io 0x0087] [ 0.120301] pnp 00:01: [io 0x0089-0x008b] [ 0.120301] pnp 00:01: [io 0x008f] [ 0.120301] pnp 00:01: [io 0x00c0-0x00df] [ 0.120301] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.120301] pnp 00:02: [io 0x0070-0x0071] [ 0.120301] pnp 00:02: [irq 8] [ 0.120301] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.120301] pnp 00:03: [io 0x0060] [ 0.120301] pnp 00:03: [io 0x0064] [ 0.120301] pnp 00:03: [irq 1] [ 0.120301] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 0.120301] pnp 00:04: [irq 12] [ 0.120301] pnp 00:04: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active) [ 0.120301] pnp 00:05: [io 0x0061] [ 0.120301] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.120998] pnp 00:06: [io 0x00f0-0x00ff] [ 0.121004] pnp 00:06: [irq 13] [ 0.121035] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.121236] pnp 00:07: [irq 6] [ 0.121238] pnp 00:07: [dma 2] [ 0.121240] pnp 00:07: [io 0x03f0-0x03f5] [ 0.121243] pnp 00:07: [io 0x03f7] [ 0.121305] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.121305] pnp 00:08: [io 0x03bc-0x03bf] [ 0.121305] pnp 00:08: [io 0x07bc-0x07bf] [ 0.121305] pnp 00:08: [irq 7] [ 0.121305] pnp 00:08: [dma 3] [ 0.121373] pnp 00:08: Plug and Play ACPI device, IDs PNP0401 (active) [ 0.121373] pnp 00:09: [io 0x0000-0xffffffff disabled] [ 0.121373] pnp 00:09: [io 0x0680-0x06ff] [ 0.121373] pnp 00:09: [io 0x0290-0x0297] [ 0.121373] system 00:09: [io 0x0680-0x06ff] has been reserved [ 0.121373] system 00:09: [io 0x0290-0x0297] has been reserved [ 0.121991] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.122063] pnp 00:0a: [io 0x0010-0x001f] [ 0.122066] pnp 00:0a: [io 0x0022-0x003f] [ 0.122069] pnp 00:0a: [io 0x0044-0x005f] [ 0.122071] pnp 00:0a: [io 0x0062-0x0063] [ 0.122073] pnp 00:0a: [io 0x0065-0x006f] [ 0.122075] pnp 00:0a: [io 0x0072-0x007f] [ 0.122078] pnp 00:0a: [io 0x0080] [ 0.122080] pnp 00:0a: [io 0x0084-0x0086] [ 0.122082] pnp 00:0a: [io 0x0088] [ 0.122084] pnp 00:0a: [io 0x008c-0x008e] [ 0.122086] pnp 00:0a: [io 0x0090-0x009f] [ 0.122091] pnp 00:0a: [io 0x00a2-0x00bf] [ 0.122093] pnp 00:0a: [io 0x00e0-0x00ef] [ 0.122095] pnp 00:0a: [io 0x03e1-0x03e7] [ 0.122097] pnp 00:0a: [io 0x04d0-0x04d1] [ 0.122099] pnp 00:0a: [io 0x0800-0x087f] [ 0.122102] pnp 00:0a: [io 0x0400-0x041f] [ 0.122104] pnp 00:0a: [io 0x0000-0xffffffff disabled] [ 0.122136] pnp 00:0a: disabling [io 0x0010-0x001f] because it overlaps 0000:00:11.6 BAR 0 [io 0x0000-0x00ff] [ 0.122245] pnp 00:0a: disabling [io 0x0022-0x003f] because it overlaps 0000:00:11.6 BAR 0 [io 0x0000-0x00ff] [ 0.122355] pnp 00:0a: disabling [io 0x0044-0x005f] because it overlaps 0000:00:11.6 BAR 0 [io 0x0000-0x00ff] [ 0.122465] pnp 00:0a: disabling [io 0x0062-0x0063] because it overlaps 0000:00:11.6 BAR 0 [io 0x0000-0x00ff] [ 0.122574] pnp 00:0a: disabling [io 0x0065-0x006f] because it overlaps 0000:00:11.6 BAR 0 [io 0x0000-0x00ff] [ 0.122683] pnp 00:0a: disabling [io 0x0072-0x007f] because it overlaps 0000:00:11.6 BAR 0 [io 0x0000-0x00ff] [ 0.122793] pnp 00:0a: disabling [io 0x0080] because it overlaps 0000:00:11.6 BAR 0 [io 0x0000-0x00ff] [ 0.122902] pnp 00:0a: disabling [io 0x0084-0x0086] because it overlaps 0000:00:11.6 BAR 0 [io 0x0000-0x00ff] [ 0.122991] pnp 00:0a: disabling [io 0x0088] because it overlaps 0000:00:11.6 BAR 0 [io 0x0000-0x00ff] [ 0.123099] pnp 00:0a: disabling [io 0x008c-0x008e] because it overlaps 0000:00:11.6 BAR 0 [io 0x0000-0x00ff] [ 0.123209] pnp 00:0a: disabling [io 0x0090-0x009f] because it overlaps 0000:00:11.6 BAR 0 [io 0x0000-0x00ff] [ 0.123319] pnp 00:0a: disabling [io 0x00a2-0x00bf] because it overlaps 0000:00:11.6 BAR 0 [io 0x0000-0x00ff] [ 0.123991] pnp 00:0a: disabling [io 0x00e0-0x00ef] because it overlaps 0000:00:11.6 BAR 0 [io 0x0000-0x00ff] [ 0.124133] system 00:0a: [io 0x03e1-0x03e7] has been reserved [ 0.124133] system 00:0a: [io 0x04d0-0x04d1] has been reserved [ 0.124150] system 00:0a: [io 0x0800-0x087f] has been reserved [ 0.124227] system 00:0a: [io 0x0400-0x041f] has been reserved [ 0.124304] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.124361] pnp 00:0b: [mem 0xfec00000-0xfec00fff] [ 0.124364] pnp 00:0b: [mem 0xfee00000-0xfee00fff] [ 0.124366] pnp 00:0b: [mem 0xfff80000-0xffffffff] [ 0.124416] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.124416] system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.124416] system 00:0b: [mem 0xfff80000-0xffffffff] has been reserved [ 0.124416] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.125316] pnp 00:0c: [mem 0x00000000-0x0009ffff] [ 0.125319] pnp 00:0c: [mem 0x000c0000-0x000dffff] [ 0.125322] pnp 00:0c: [mem 0x000e0000-0x000fffff] [ 0.125324] pnp 00:0c: [mem 0x00100000-0x3ffeffff] [ 0.125327] pnp 00:0c: [mem 0x00000000-0xffffffff disabled] [ 0.125377] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.125377] system 00:0c: [mem 0x000c0000-0x000dffff] could not be reserved [ 0.125377] system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.125377] system 00:0c: [mem 0x00100000-0x3ffeffff] could not be reserved [ 0.125377] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.125422] pnp: PnP ACPI: found 13 devices [ 0.125495] ACPI: ACPI bus type pnp unregistered [ 0.163515] Switching to clocksource acpi_pm [ 0.163612] PCI: max bus depth: 1 pci_try_num: 2 [ 0.163623] pci 0000:00:11.6: BAR 0: assigned [io 0x1000-0x10ff] [ 0.163703] pci 0000:00:11.6: BAR 0: set to [io 0x1000-0x10ff] (PCI address [0x1000-0x10ff]) [ 0.163812] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.163889] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.163968] pci 0000:00:01.0: bridge window [mem 0xfbe00000-0xfbffffff] [ 0.163968] Switched to NOHz mode on CPU #0 [ 0.163592] Switched to NOHz mode on CPU #1 [ 0.163968] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf9ffffff pref] [ 0.163968] pci 0000:00:01.0: setting latency timer to 64 [ 0.163968] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] [ 0.163968] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff] [ 0.163968] pci_bus 0000:00: resource 6 [mem 0x40000000-0xffffffff] [ 0.163968] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 0.163968] pci_bus 0000:01: resource 1 [mem 0xfbe00000-0xfbffffff] [ 0.163968] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf9ffffff pref] [ 0.163968] NET: Registered protocol family 2 [ 0.163968] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.164140] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.165314] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.165982] TCP: Hash tables configured (established 131072 bind 65536) [ 0.166071] TCP reno registered [ 0.166145] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.166241] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.166439] NET: Registered protocol family 1 [ 0.166540] pci 0000:00:01.0: disabling DAC on VIA PCI bridge [ 0.166634] pci 0000:00:10.0: uhci_check_and_reset_hc: legsup = 0x8030 [ 0.166636] pci 0000:00:10.0: Performing full reset [ 0.166651] pci 0000:00:10.1: uhci_check_and_reset_hc: legsup = 0x8030 [ 0.166653] pci 0000:00:10.1: Performing full reset [ 0.166704] pci 0000:01:00.0: Boot video device [ 0.166708] PCI: CLS 64 bytes, default 64 [ 0.166764] Trying to unpack rootfs image as initramfs... [ 0.167069] rootfs image is not initramfs (no cpio magic); looks like an initrd [ 0.167979] Freeing initrd memory: 344k freed [ 0.169378] audit: initializing netlink socket (disabled) [ 0.169466] type=2000 audit(1321060065.168:1): initialized [ 0.186935] highmem bounce pool size: 64 pages [ 0.187029] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.191948] msgmni has been set to 1741 [ 0.192447] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.192553] io scheduler noop registered [ 0.192626] io scheduler deadline registered [ 0.192711] io scheduler cfq registered (default) [ 0.193200] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 0.193311] ACPI: Power Button [PWRB] [ 0.193455] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1 [ 0.193562] ACPI: Sleep Button [SLPB] [ 0.193697] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.193803] ACPI: Power Button [PWRF] [ 0.193958] ACPI: acpi_idle registered with cpuidle [ 0.195996] Serial: 8250/16550 driver, 2 ports, IRQ sharing enabled [ 0.201405] lp: driver loaded but no devices found [ 0.201624] Non-volatile memory driver v1.3 [ 0.201710] Linux agpgart interface v0.103 [ 0.201796] agpgart-amd64 0000:00:00.0: AGP bridge [1106/0282] [ 0.213567] agpgart-amd64 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 0.213819] ipmi message handler version 39.2 [ 0.213951] [drm] Initialized drm 1.1.0 20060810 [ 0.214150] [drm] radeon defaulting to userspace modesetting. [ 0.214407] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.214602] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 0.214679] [drm] No driver support for vblank timestamp query. [ 0.214757] [drm] Initialized radeon 1.33.0 20080528 for 0000:01:00.0 on minor 0 [ 0.215512] parport_pc 00:08: reported by Plug and Play ACPI [ 0.215634] parport0: PC-style at 0x3bc (0x7bc), irq 7 [PCSPP,TRISTATE] [ 0.298064] lp0: using parport0 (interrupt-driven). [ 0.298675] Floppy drive(s): fd0 is 1.44M [ 0.313230] FDC 0 is a post-1991 82077 [ 0.316982] brd: module loaded [ 0.317973] loop: module loaded [ 0.318054] Uniform Multi-Platform E-IDE driver [ 0.318223] pdc202xx_new 0000:00:0e.0: IDE controller (0x105a:0x4d68 rev 0x01) [ 0.318337] pci 0000:00:0e.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 0.328458] pdc202xx_new 0000:00:0e.0: PLL input clock is 16662 kHz [ 0.358535] pdc202xx_new 0000:00:0e.0: 100% native mode on irq 19 [ 0.358615] ide2: BM-DMA at 0x9400-0x9407 [ 0.358695] ide3: BM-DMA at 0x9408-0x940f [ 0.358774] Probing IDE interface ide2... [ 0.622332] hde: IBM-DPTA-372050, ATA DISK drive [ 0.928011] hdf: IBM-DTLA-305020, ATA DISK drive [ 0.928143] hde: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [ 0.928393] hde: UDMA/66 mode selected [ 0.928734] hdf: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [ 0.928893] hdf: UDMA/100 mode selected [ 0.929128] Probing IDE interface ide3... [ 1.193330] hdg: IC35L120AVV207-0, ATA DISK drive [ 1.805063] hdg: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [ 1.805232] hdg: UDMA/100 mode selected [ 1.805511] ide2 at 0xa800-0xa807,0xa402 on irq 19 [ 1.805659] ide3 at 0xa000-0xa007,0x9802 on irq 19 [ 1.805952] via82cxxx 0000:00:0f.1: VIA vt8237 (rev 00) IDE UDMA133 [ 1.806036] via82cxxx 0000:00:0f.1: IDE controller (0x1106:0x0571 rev 0x06) [ 1.806125] pci 0000:00:0f.1: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 1.806224] via82cxxx 0000:00:0f.1: not 100% native mode: will probe irqs later [ 1.806331] ide0: BM-DMA at 0xfc00-0xfc07 [ 1.806411] ide1: BM-DMA at 0xfc08-0xfc0f [ 1.806487] Probing IDE interface ide0... [ 2.478105] hda: HITACHI DVD-ROM GD-8000, ATAPI CD/DVD-ROM drive [ 3.243011] hdb: IOMEGA ZIP 250 ATAPI, ATAPI FLOPPY drive [ 3.243232] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4 [ 3.244367] hda: host side 80-wire cable detection failed, limiting max speed to UDMA33 [ 3.244472] hda: UDMA/33 mode selected [ 3.245439] hdb: host max PIO5 wanted PIO255(auto-tune) selected PIO3 [ 3.245714] hdb: MWDMA0 mode selected [ 3.246090] hdb: set_drive_speed_status: status=0x51 { DriveReady SeekComplete Error } [ 3.246358] hdb: set_drive_speed_status: error=0x04 { AbortedCommand } [ 3.246556] hdb: possibly failed opcode: 0x00 [ 3.246630] hdb: host max PIO5 wanted PIO255(auto-tune) selected PIO3 [ 3.246919] Probing IDE interface ide1... [ 3.765090] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 3.765254] ide1 at 0x170-0x177,0x376 on irq 15 [ 3.765614] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports [ 3.765762] ide-gd driver 1.18 [ 3.765851] hde: max request size: 128KiB [ 3.779824] hde: 40088160 sectors (20525 MB) w/1961KiB Cache, CHS=39770/16/63 [ 3.779984] hde: cache flushes not supported [ 3.885035] hde: hde1 < hde5 hde6 hde7 hde8 hde9 hde10 hde11 hde12 hde13 hde14 > [ 3.885764] hdf: max request size: 128KiB [ 3.919977] hdf: 40188960 sectors (20576 MB) w/380KiB Cache, CHS=39870/16/63 [ 3.920141] hdf: cache flushes not supported [ 3.962425] hdf: hdf1 hdf2 hdf3 hdf4 [ 3.962773] hdg: max request size: 512KiB [ 3.978170] hdg: 241254720 sectors (123522 MB) w/1821KiB Cache, CHS=16383/255/63 [ 3.978536] hdg: cache flushes supported [ 4.112787] hdg: hdg1 hdg2 hdg3 hdg4 < hdg5 hdg6 hdg7 hdg8 hdg9 hdg10 hdg11 hdg12 hdg13 hdg14 hdg15 hdg16 > [ 4.114792] ide-gd: hdb: No disk in drive [ 4.116243] ide-gd: hdb: 244736kB, 239/64/32 CHS, 4096 kBps, 512 sector size, 2941 rpm [ 4.116510] ide-cd driver 5.00 [ 4.119200] ide-cd: hda: ATAPI 48X DVD-ROM drive, 512kB Cache [ 4.119438] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 4.137539] sata_via 0000:00:0f.0: version 2.6 [ 4.137547] sata_via 0000:00:0f.0: PCI INT B -> GSI 20 (level, low) -> IRQ 20 [ 4.137663] sata_via 0000:00:0f.0: routed to hard irq line 10 [ 4.138119] scsi0 : sata_via [ 4.138317] scsi1 : sata_via [ 4.138480] ata1: SATA max UDMA/133 cmd 0xc800 ctl 0xc400 bmdma 0xb400 irq 20 [ 4.138558] ata2: SATA max UDMA/133 cmd 0xc000 ctl 0xb800 bmdma 0xb408 irq 20 [ 4.138955] skge 0000:00:0a.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 4.139050] skge 0000:00:0a.0: PCI: Disallowing DAC for device [ 4.139153] skge: 1.13 addr 0xfb700000 irq 17 chip Yukon-Lite rev 9 [ 4.139502] skge 0000:00:0a.0: eth0: addr 00:17:31:17:5f:de [ 4.139698] PPP generic driver version 2.4.2 [ 4.139867] PPP Deflate Compression module registered [ 4.139986] console [netcon0] enabled [ 4.140090] netconsole: network logging started [ 4.140165] usbmon: debugfs is not available [ 4.140240] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 4.140317] ehci_hcd: block sizes: qh 64 qtd 96 itd 160 sitd 96 [ 4.140350] ehci_hcd 0000:00:10.4: PCI INT C -> GSI 21 (level, low) -> IRQ 21 [ 4.140450] ehci_hcd 0000:00:10.4: EHCI Host Controller [ 4.140530] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1 [ 4.140642] ehci_hcd 0000:00:10.4: reset hcs_params 0x2204 dbg=0 cc=2 pcc=2 ordered !ppc ports=4 [ 4.140646] ehci_hcd 0000:00:10.4: reset hcc_params 6872 thresh 7 uframes 256/512/1024 [ 4.140670] ehci_hcd 0000:00:10.4: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 4.140677] ehci_hcd 0000:00:10.4: MWI active [ 4.140680] ehci_hcd 0000:00:10.4: supports USB remote wakeup [ 4.140710] ehci_hcd 0000:00:10.4: irq 21, io mem 0xfbd00000 [ 4.140787] ehci_hcd 0000:00:10.4: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 4.140793] ehci_hcd 0000:00:10.4: init command 0010005 (park)=0 ithresh=1 period=512 RUN [ 4.146013] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00 [ 4.146104] usb usb1: default language 0x0409 [ 4.146111] usb usb1: udev 1, busnum 1, minor = 0 [ 4.146113] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 4.146191] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.146297] usb usb1: Product: EHCI Host Controller [ 4.146372] usb usb1: Manufacturer: Linux 3.0.4 ehci_hcd [ 4.146448] usb usb1: SerialNumber: 0000:00:10.4 [ 4.146604] usb usb1: usb_probe_device [ 4.146607] usb usb1: configuration #1 chosen from 1 choice [ 4.146616] usb usb1: adding 1-0:1.0 (config #1, interface 0) [ 4.146667] hub 1-0:1.0: usb_probe_interface [ 4.146670] hub 1-0:1.0: usb_probe_interface - got id [ 4.146672] hub 1-0:1.0: USB hub found [ 4.146749] hub 1-0:1.0: 4 ports detected [ 4.146823] hub 1-0:1.0: standalone hub [ 4.146825] hub 1-0:1.0: no power switching (usb 1.0) [ 4.146827] hub 1-0:1.0: individual port over-current protection [ 4.146830] hub 1-0:1.0: power on to power good time: 20ms [ 4.146834] hub 1-0:1.0: local power source is good [ 4.146837] hub 1-0:1.0: trying to enable port power on non-switchable hub [ 4.146924] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 4.147009] ohci_hcd: block sizes: ed 64 td 64 [ 4.147052] uhci_hcd: USB Universal Host Controller Interface driver [ 4.147173] uhci_hcd 0000:00:10.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 4.147256] uhci_hcd 0000:00:10.0: UHCI Host Controller [ 4.147335] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 [ 4.147444] uhci_hcd 0000:00:10.0: detected 2 ports [ 4.147522] uhci_hcd 0000:00:10.0: uhci_check_and_reset_hc: cmd = 0x0000 [ 4.147524] uhci_hcd 0000:00:10.0: Performing full reset [ 4.147535] uhci_hcd 0000:00:10.0: supports USB remote wakeup [ 4.147540] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000d000 [ 4.147643] usb usb2: default language 0x0409 [ 4.147648] usb usb2: udev 1, busnum 2, minor = 128 [ 4.147651] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 4.148321] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.148427] usb usb2: Product: UHCI Host Controller [ 4.148502] usb usb2: Manufacturer: Linux 3.0.4 uhci_hcd [ 4.148578] usb usb2: SerialNumber: 0000:00:10.0 [ 4.148721] usb usb2: usb_probe_device [ 4.148724] usb usb2: configuration #1 chosen from 1 choice [ 4.148730] usb usb2: adding 2-0:1.0 (config #1, interface 0) [ 4.148779] hub 2-0:1.0: usb_probe_interface [ 4.148781] hub 2-0:1.0: usb_probe_interface - got id [ 4.148784] hub 2-0:1.0: USB hub found [ 4.148859] hub 2-0:1.0: 2 ports detected [ 4.148932] hub 2-0:1.0: standalone hub [ 4.148934] hub 2-0:1.0: no power switching (usb 1.0) [ 4.148936] hub 2-0:1.0: individual port over-current protection [ 4.148939] hub 2-0:1.0: power on to power good time: 2ms [ 4.148942] hub 2-0:1.0: local power source is good [ 4.148945] hub 2-0:1.0: trying to enable port power on non-switchable hub [ 4.148982] ehci_hcd 0000:00:10.4: HS companion for 0000:00:10.0 [ 4.148996] uhci_hcd 0000:00:10.1: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 4.149086] uhci_hcd 0000:00:10.1: UHCI Host Controller [ 4.149163] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3 [ 4.149271] uhci_hcd 0000:00:10.1: detected 2 ports [ 4.149348] uhci_hcd 0000:00:10.1: uhci_check_and_reset_hc: cmd = 0x0000 [ 4.149350] uhci_hcd 0000:00:10.1: Performing full reset [ 4.149361] uhci_hcd 0000:00:10.1: supports USB remote wakeup [ 4.149366] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000d400 [ 4.149467] usb usb3: default language 0x0409 [ 4.149472] usb usb3: udev 1, busnum 3, minor = 256 [ 4.149475] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 4.149552] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.149657] usb usb3: Product: UHCI Host Controller [ 4.149732] usb usb3: Manufacturer: Linux 3.0.4 uhci_hcd [ 4.149807] usb usb3: SerialNumber: 0000:00:10.1 [ 4.149949] usb usb3: usb_probe_device [ 4.149952] usb usb3: configuration #1 chosen from 1 choice [ 4.149958] usb usb3: adding 3-0:1.0 (config #1, interface 0) [ 4.150011] hub 3-0:1.0: usb_probe_interface [ 4.150014] hub 3-0:1.0: usb_probe_interface - got id [ 4.150016] hub 3-0:1.0: USB hub found [ 4.150091] hub 3-0:1.0: 2 ports detected [ 4.150164] hub 3-0:1.0: standalone hub [ 4.150166] hub 3-0:1.0: no power switching (usb 1.0) [ 4.150168] hub 3-0:1.0: individual port over-current protection [ 4.150170] hub 3-0:1.0: power on to power good time: 2ms [ 4.150174] hub 3-0:1.0: local power source is good [ 4.150177] hub 3-0:1.0: trying to enable port power on non-switchable hub [ 4.150209] ehci_hcd 0000:00:10.4: HS companion for 0000:00:10.1 [ 4.150309] usbcore: registered new interface driver libusual [ 4.150494] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 4.151111] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 4.151191] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 4.151480] mousedev: PS/2 mouse device common for all mice [ 4.151860] rtc_cmos 00:02: RTC can wake from S4 [ 4.152125] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 4.152256] rtc0: alarms up to one year, y3k, 114 bytes nvram [ 4.152714] cpuidle: using governor ladder [ 4.152788] cpuidle: using governor menu [ 4.152862] EFI Variables Facility v0.08 2004-May-17 [ 4.153810] usbcore: registered new interface driver usbhid [ 4.153885] usbhid: USB HID core driver [ 4.154301] VIA 82xx Audio 0000:00:11.5: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 4.154766] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64 [ 4.168444] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 4.246032] hub 1-0:1.0: state 7 ports 4 chg 0000 evt 0000 [ 4.248016] uhci_hcd 0000:00:10.0: port 1 portsc 018a,00 [ 4.248025] uhci_hcd 0000:00:10.0: port 2 portsc 018a,00 [ 4.250012] uhci_hcd 0000:00:10.1: port 1 portsc 018a,00 [ 4.250020] uhci_hcd 0000:00:10.1: port 2 portsc 018a,00 [ 4.335436] logips2pp: Detected unknown logitech mouse model 105 [ 4.339015] ata1: SATA link down 1.5 Gbps (SStatus 0 SControl 300) [ 4.349777] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 4.350020] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 4.550017] ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300) [ 4.668324] ALSA device list: [ 4.668397] #0: VIA 8237 with ALC850 at 0xd800, irq 22 [ 4.668520] Netfilter messages via NETLINK v0.30. [ 4.668622] nf_conntrack version 0.5.0 (16104 buckets, 64416 max) [ 4.668902] ctnetlink v0.93: registering with nfnetlink. [ 4.669130] ip_tables: (C) 2000-2006 Netfilter Core Team [ 4.669246] TCP cubic registered [ 4.669318] Initializing XFRM netlink socket [ 4.669757] NET: Registered protocol family 10 [ 4.670056] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 4.670164] IPv6 over IPv4 tunneling driver [ 4.670472] NET: Registered protocol family 17 [ 4.670554] Using IPI No-Shortcut mode [ 4.670806] PM: Hibernation image not present or could not be loaded. [ 4.670815] registered taskstats version 1 [ 4.671177] Magic number: 3:100:104 [ 4.820271] input: ImExPS/2 Logitech Explorer Mouse as /devices/platform/i8042/serio1/input/input4 [ 4.823248] RAMDISK: gzip image found at block 0 [ 4.878083] VFS: Mounted root (ext2 filesystem) on device 1:0. [ 4.888865] EXT3-fs: barriers not enabled [ 4.897932] kjournald starting. Commit interval 5 seconds [ 4.898031] EXT3-fs (hdg9): mounted filesystem with writeback data mode [ 4.910608] Freeing unused kernel memory: 404k freed [ 5.454033] usb usb2: suspend_rh (auto-stop) [ 5.454056] usb usb3: suspend_rh (auto-stop) [ 8.636059] EXT3-fs (hdg9): using internal journal [ 8.862008] EXT3-fs: barriers not enabled [ 8.867098] kjournald starting. Commit interval 5 seconds [ 8.867262] EXT3-fs (hdg11): using internal journal [ 8.867266] EXT3-fs (hdg11): mounted filesystem with writeback data mode [ 8.880396] EXT2-fs (hdg12): warning: mounting ext3 filesystem as ext2 [ 8.935602] EXT2-fs (hdg6): warning: mounting ext3 filesystem as ext2 [ 8.958480] EXT3-fs: barriers not enabled [ 8.965695] kjournald starting. Commit interval 5 seconds [ 8.965856] EXT3-fs (hdg13): using internal journal [ 8.965858] EXT3-fs (hdg13): mounted filesystem with writeback data mode [ 9.005556] EXT3-fs: barriers not enabled [ 9.007775] kjournald starting. Commit interval 5 seconds [ 9.007938] EXT3-fs (hdg16): using internal journal [ 9.007941] EXT3-fs (hdg16): mounted filesystem with writeback data mode [ 9.062606] EXT3-fs: barriers not enabled [ 9.067036] kjournald starting. Commit interval 5 seconds [ 9.067197] EXT3-fs (hdg10): using internal journal [ 9.067199] EXT3-fs (hdg10): mounted filesystem with writeback data mode [ 9.127867] EXT3-fs: barriers not enabled [ 9.129179] kjournald starting. Commit interval 5 seconds [ 9.129338] EXT3-fs (hdg14): using internal journal [ 9.129341] EXT3-fs (hdg14): mounted filesystem with writeback data mode [ 9.186274] EXT3-fs: barriers not enabled [ 9.190301] kjournald starting. Commit interval 5 seconds [ 9.190464] EXT3-fs (hdg15): using internal journal [ 9.190466] EXT3-fs (hdg15): mounted filesystem with writeback data mode [ 9.215174] EXT3-fs: barriers not enabled [ 9.229106] kjournald starting. Commit interval 5 seconds [ 9.234654] EXT3-fs (hde13): using internal journal [ 9.234657] EXT3-fs (hde13): mounted filesystem with writeback data mode [ 9.263930] EXT3-fs: barriers not enabled [ 9.272239] kjournald starting. Commit interval 5 seconds [ 9.274500] EXT3-fs (hde14): using internal journal [ 9.274502] EXT3-fs (hde14): mounted filesystem with writeback data mode [ 9.301527] EXT3-fs: barriers not enabled [ 9.313902] kjournald starting. Commit interval 5 seconds [ 9.314066] EXT3-fs (hdf3): using internal journal [ 9.314069] EXT3-fs (hdf3): mounted filesystem with writeback data mode [ 9.363910] EXT3-fs: barriers not enabled [ 9.377729] kjournald starting. Commit interval 5 seconds [ 9.377891] EXT3-fs (hdf4): using internal journal [ 9.377894] EXT3-fs (hdf4): mounted filesystem with writeback data mode [ 10.161336] Adding 538172k swap on /dev/hdg2. Priority:32 extents:1 across:538172k [ 10.175205] Adding 538172k swap on /dev/hdg3. Priority:33 extents:1 across:538172k [ 10.199122] Adding 500404k swap on /dev/hde5. Priority:128 extents:1 across:500404k [ 10.213534] Adding 500436k swap on /dev/hde6. Priority:129 extents:1 across:500436k [ 10.227354] Adding 500436k swap on /dev/hde7. Priority:130 extents:1 across:500436k [ 10.242217] Adding 500436k swap on /dev/hde8. Priority:131 extents:1 across:500436k [ 10.265704] Adding 500436k swap on /dev/hde9. Priority:132 extents:1 across:500436k [ 10.281849] Adding 500436k swap on /dev/hde10. Priority:133 extents:1 across:500436k [ 10.297226] Adding 500436k swap on /dev/hde11. Priority:134 extents:1 across:500436k [ 10.312635] Adding 500436k swap on /dev/hde12. Priority:135 extents:1 across:500436k