Thanks a lot for your help. Please find below Xorg.0.log after Xorg -config /root/xorg.conf -logverbose 7: (II) config/hal: initialized_XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6 _XSERVTransOpen: transport open failed for inet6/<a href="http://casiopea.lukawski.net:0">casiopea.lukawski.net:0</a> _XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6 X.Org X Server 1.6.5 Release Date: 2009-10-11 X Protocol Version 11, Revision 0 Build Operating System: FreeBSD 8.0-RELEASE i386 Current Operating System: FreeBSD <a href="http://casiopea.lukawski.net">casiopea.lukawski.net</a> 8.0-RELEASE-p2 FreeBSD 8.0-RELEASE-p2 #2: Wed Mar 10 07:08:19 CET 2010 root@casiopea.lukawski.net:/usr/obj/usr/src/sys/FIVA i386 Build Date: 06 March 2010 02:03:54PM Before reporting problems, check <a href="http://wiki.x.org">http://wiki.x.org</a> to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Fri Mar 19 15:17:34 2010 (++) Using config file: "/root/xorg.conf" (==) ServerLayout "XFree86 Configured" (**) |-->Screen "FIVA Screen" (0) (**) | |-->Monitor "FIVA 8.4inch LCD" (**) | |-->Device "Silicon Motion Lynx" (**) |-->Input Device "FIVA Point" (**) |-->Input Device "FIVA Keyboard" (**) Option "DontZap" "off" (**) Option "AllowEmptyInput" "false" (==) Automatically adding devices (==) Automatically enabling devices (**) FontPath set to: /usr/local/lib/X11/fonts/misc/, /usr/local/lib/X11/fonts/TTF/, /usr/local/lib/X11/fonts/OTF, /usr/local/lib/X11/fonts/Type1/, /usr/local/lib/X11/fonts/100dpi/, /usr/local/lib/X11/fonts/75dpi/, /usr/local/lib/X11/fonts/misc/, /usr/local/lib/X11/fonts/TTF/, /usr/local/lib/X11/fonts/OTF, /usr/local/lib/X11/fonts/Type1/, /usr/local/lib/X11/fonts/100dpi/, /usr/local/lib/X11/fonts/75dpi/ (**) ModulePath set to "/usr/local/lib/xorg/modules" (II) Loader magic: 0x6a0 (II) Module ABI versions: X.Org ANSI C Emulation: 0.4 X.Org Video Driver: 5.0 X.Org XInput driver : 4.0 X.Org Server Extension : 2.0 (II) Loader running on freebsd (--) Using syscons driver with X support (version 2.0) (--) using VT number 9 (--) PCI:*(0:0:9:0) 126f:0712:126f:0712 Silicon Motion, Inc. SM712 LynxEM+ rev 160, Mem @ 0xfd000000/16777216, BIOS @ 0x????????/65536 (II) System resource ranges: [0] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [1] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [2] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [3] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [4] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file. (II) "dbe" will be loaded. This was enabled by default and also specified in the config file. (II) "glx" will be loaded. This was enabled by default and also specified in the config file. (II) "record" will be loaded. This was enabled by default and also specified in the config file. (II) "dri" will be loaded. This was enabled by default and also specified in the config file. (II) "dri2" will be loaded. This was enabled by default and also specified in the config file. (II) LoadModule: "dbe" (II) Loading /usr/local/lib/xorg/modules/extensions//libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 1.6.5, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "dri" (II) Loading /usr/local/lib/xorg/modules/extensions//libdri.so (II) Module dri: vendor="X.Org Foundation" compiled for 1.6.5, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension XFree86-DRI (II) LoadModule: "dri2" (II) Loading /usr/local/lib/xorg/modules/extensions//libdri2.so (II) Module dri2: vendor="X.Org Foundation" compiled for 1.6.5, module version = 1.1.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DRI2 (II) LoadModule: "extmod" (II) Loading /usr/local/lib/xorg/modules/extensions//libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 1.6.5, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "glx" (II) Loading /usr/local/lib/xorg/modules/extensions//libglx.so (II) Module glx: vendor="X.Org Foundation" compiled for 1.6.5, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (==) AIGLX disabled (II) Loading extension GLX (II) LoadModule: "record" (II) Loading /usr/local/lib/xorg/modules/extensions//librecord.so (II) Module record: vendor="X.Org Foundation" compiled for 1.6.5, module version = 1.13.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension RECORD (II) LoadModule: "siliconmotion" (II) Loading /usr/local/lib/xorg/modules/drivers//siliconmotion_drv.so (II) Module siliconmotion: vendor="X.Org Foundation" compiled for 1.6.5, module version = 1.7.3 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 5.0 (II) LoadModule: "mouse" (II) Loading /usr/local/lib/xorg/modules/input//mouse_drv.so (II) Module mouse: vendor="X.Org Foundation" compiled for 1.6.5, module version = 1.4.0 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 4.0 (II) LoadModule: "kbd" (II) Loading /usr/local/lib/xorg/modules/input//kbd_drv.so (II) Module kbd: vendor="X.Org Foundation" compiled for 1.6.5, module version = 1.3.2 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 4.0 (II) SMI: driver (version 1.7.3) for Silicon Motion Lynx chipsets: Lynx, LynxE, Lynx3D, LynxEM, LynxEM+, Lynx3DM, Cougar3DR, MSOC (II) Primary Device is: PCI 00@00:09:0 (WW) Falling back to old probe method for siliconmotion (**) Chipset override: lynxem+ (**) Chipset LynxEM+ found (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [1] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [2] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [3] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [4] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) resource ranges after probing: [0] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [1] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [2] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [3] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [4] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [5] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [6] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [7] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [8] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [9] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) Setting vga for screen 0. (II) Loading sub module "vgahw" (II) LoadModule: "vgahw" (II) Loading /usr/local/lib/xorg/modules//libvgahw.so (II) Module vgahw: vendor="X.Org Foundation" compiled for 1.6.5, module version = 0.1.0 ABI class: X.Org Video Driver, version 5.0 SMI_PreInit vgaCRIndex=4, vgaIOBase=0, MMIOBase=0x0 (**) SMI(0): Depth 16, (--) framebuffer bpp 16 (==) SMI(0): RGB weight 565 (==) SMI(0): Default visual is TrueColor (**) SMI(0): Option "pci_burst" "on" (**) SMI(0): Option "SWCursor" "true" (**) SMI(0): Option "UseBIOS" "off" (**) SMI(0): PCI Burst enabled (==) SMI(0): PCI Retry enabled (**) SMI(0): Using Software Cursor (**) SMI(0): Option: UseBIOS disabled. (**) SMI(0): Chipset: "lynxem+" (==) SMI(0): Dual head disabled (==) SMI(0): Using XAA acceleration architecture (II) SMI(0): Physical MMIO at 0xFD400000 (II) SMI(0): Logical MMIO at 0x28c00000 - 0x28ffffff (II) SMI(0): DPR=0x28c08000, VPR=0x28c0c000, IOBase=0x28f00000 (II) SMI(0): DataPort=0x28c00000 - 0x28c07fff (--) SMI(0): videoram: 4096kB (II) SMI(0): Physical frame buffer at 0xFD000000 offset: 0x00000000 (II) SMI(0): Logical frame buffer at 0x29000000 - 0x293fffff (II) SMI(0): Cursor Offset: 003FFC00 (II) SMI(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 (II) SMI(0): Reserved: 003FF800 (II) SMI(0): TFT Panel Size = 800x600 (II) Loading sub module "i2c" (II) LoadModule: "i2c" (II) Module "i2c" already built-in (II) SMI(0): I2C bus "I2C bus" initialized. (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Module "ddc" already built-in (==) SMI(0): Using gamma correction (1.0, 1.0, 1.0) (II) SMI(0): MCLK = 157.000 (II) SMI(0): Output LVDS using monitor section FIVA 8.4inch LCD (II) SMI(0): Output LVDS connected (II) SMI(0): Using user preference for initial modes (II) SMI(0): Output LVDS using initial mode 800x600 (==) SMI(0): DPI set to (96, 96) (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/local/lib/xorg/modules//libfb.so (II) Module fb: vendor="X.Org Foundation" compiled for 1.6.5, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.4 (II) Loading sub module "xaa" (II) LoadModule: "xaa" (II) Loading /usr/local/lib/xorg/modules//libxaa.so (II) Module xaa: vendor="X.Org Foundation" compiled for 1.6.5, module version = 1.2.1 ABI class: X.Org Video Driver, version 5.0 (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [1] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [2] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [3] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [4] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [5] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [6] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [7] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [8] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [9] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) SMI(0): Physical MMIO at 0xFD400000 (II) SMI(0): Logical MMIO at 0x28c00000 - 0x28ffffff (II) SMI(0): DPR=0x28c08000, VPR=0x28c0c000, IOBase=0x28f00000 (II) SMI(0): DataPort=0x28c00000 - 0x28c07fff (II) SMI(0): Physical frame buffer at 0xFD000000 offset: 0x00000000 (II) SMI(0): Logical frame buffer at 0x29000000 - 0x293fffff (II) SMI(0): Cursor Offset: 003FFC00 (II) SMI(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 (II) SMI(0): Reserved: 003FF800 (II) SMI(0): Saved current video mode. Register dump: (II) SMI(0): START register dump ------------------ MISCELLANEOUS OUTPUT 67 SEQUENCER x0 x1 x2 x3 x4 x5 x6 x7 x8 x9 xA xB xC xD xE xF 00| 03 00 03 00 02 24 24 24 24 24 24 24 24 24 24 24 10| 40 01 10 00 00 0A 17 00 51 00 00 00 00 00 00 00 20| C4 30 02 00 01 00 00 00 00 00 00 00 00 00 00 00 30| 24 03 20 09 C0 24 24 24 24 24 24 24 00 00 03 FF 40| 00 FC 00 00 20 18 00 FC 20 0C 44 20 00 24 24 24 50| 04 48 83 63 68 73 57 58 04 03 7B 24 24 00 00 24 60| 01 00 3E 1A 1A 00 20 00 50 04 12 02 1C 85 0B 04 70| 82 41 3F 35 04 00 24 24 24 24 24 24 24 24 24 24 80| FF 03 00 00 12 58 00 24 89 01 25 01 00 FF 24 24 90| 00 00 00 00 24 24 24 24 24 24 24 24 24 24 24 24 A0| 00 00 00 2D C1 ED ED ED 01 07 46 08 81 37 28 40 CRT CONTROLLER x0 x1 x2 x3 x4 x5 x6 x7 x8 x9 xA xB xC xD xE xF 00| 5F 4F 50 02 53 81 BF 1F 00 4F 00 0F 00 00 FF FF 10| 9C 0E 8F 28 1F 96 B9 A3 FF 00 00 00 00 00 00 00 30| 00 00 00 00 00 88 02 20 00 00 28 40 00 00 11 00 40| 7F 63 00 6B 1B 72 57 00 58 0C A2 20 4F 8F 00 00 90| 56 4A 5E 55 86 9D 8E AA 8A A3 DF 33 00 00 1B 00 A0| 20 1F 1A 19 19 0F 0F 0A 00 00 00 00 00 00 GRAPHICS CONTROLLER x0 x1 x2 x3 x4 x5 x6 x7 x8 x9 xA xB xC xD xE xF 00| 00 00 00 00 00 10 0E 00 FF ATTRIBUTE 0CONTROLLER x0 x1 x2 x3 x4 x5 x6 x7 x8 x9 xA xB xC xD xE xF 00| 00 01 02 03 04 05 14 07 38 39 3A 3B 3C 3D 3E 3F 10| 0C 00 0F 08 00 DPR x0 x4 x8 xC 00| C000C000 F000F000 F320C258 000000F0 10| F320F320 FF000000 FFFEFEFE C0D4F000 20| FF000000 FFFFFFFF FFFFFFFF F000C000 30| F320F320 77DDBBEE 77DDBBEE F320F320 40| FFF00000 FFF00000 VPR x0 x4 x8 xC 00| 00020000 0000000F 00000000 00000000 10| 01420140 02E306E2 03F70200 0000A5C0 20| 02F30005 00000000 011A013E 022D0243 30| 0007386C 00020001 00000000 00000000 40| 00000000 00000000 00000000 00000000 50| 00000000 01026543 00000542 00EDEDED 60| 000001BE CPR x0 x4 x8 xC 00| 00000008 00000004 00000010 00041441 10| 00006200 00000141 00000006 (II) SMI(0): END register dump -------------------- (II) SMI(0): DPMS enabled (II) SMI(0): I2C device "I2C bus:SAA 7111A" registered at address 0x48. (II) SMI(0): I2C device "I2C bus:SAA 7111A" removed. (II) SMI(0): RandR 1.2 enabled, ignore the following RandR disabled message. (WW) SMI(0): Option "fifo_conservative" is not used (--) RandR disabled (II) Setting vga for screen 0. (II) Initializing built-in extension Generic Event Extension (II) Initializing built-in extension SHAPE (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension BIG-REQUESTS (II) Initializing built-in extension SYNC (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension XC-MISC (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFIXES (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) Initializing built-in extension COMPOSITE (II) Initializing built-in extension DAMAGE (II) AIGLX: Loaded and initialized /usr/local/lib/dri/swrast_dri.so (II) GLX: Initialized DRISWRAST GL provider for screen 0 (II) SMI(0): Setting screen physical size to 211 x 158 [dix] Could not init font path element <80>, removing from list! (**) Option "Protocol" "Auto" (**) FIVA Point: Device: "/dev/sysmouse" (**) FIVA Point: Protocol: "Auto" (**) Option "CorePointer" (**) FIVA Point: always reports core events (**) Option "Device" "/dev/sysmouse" (==) FIVA Point: Emulate3Buttons, Emulate3Timeout: 50 (**) FIVA Point: ZAxisMapping: buttons 4 and 5 (**) FIVA Point: Buttons: 9 (**) Option "SampleRate" "600" (**) FIVA Point: SampleRate: 600 (**) FIVA Point: Sensitivity: 1 (II) XINPUT: Adding extended input device "FIVA Point" (type: MOUSE) (**) FIVA Point: (accel) keeping acceleration scheme 1 (**) FIVA Point: (accel) filter chain progression: 2.00 (**) FIVA Point: (accel) filter stage 0: 20.00 ms (**) FIVA Point: (accel) set acceleration profile 0 (**) Option "Device" "/dev/sysmouse" (II) FIVA Point: SetupAuto: hw.iftype is 4, hw.model is 0 (II) FIVA Point: SetupAuto: protocol is SysMouse (**) Option "CoreKeyboard" (**) FIVA Keyboard: always reports core events (**) Option "Protocol" "standard" (**) FIVA Keyboard: Protocol: standard (**) Option "AutoRepeat" "500 30" (**) Option "XkbRules" "xorg" (**) FIVA Keyboard: XkbRules: "xorg" (**) Option "XkbModel" "pc105" (**) FIVA Keyboard: XkbModel: "pc105" (**) Option "XkbLayout" "us" (**) FIVA Keyboard: XkbLayout: "us" (**) Option "CustomKeycodes" "off" (**) FIVA Keyboard: CustomKeycodes disabled (II) XINPUT: Adding extended input device "FIVA Keyboard" (type: KEYBOARD) (II) config/hal: Adding input device AT Keyboard (**) AT Keyboard: always reports core events (**) Option "Protocol" "standard" (**) AT Keyboard: Protocol: standard (**) Option "AutoRepeat" "500 30" (**) Option "XkbRules" "xorg" (**) AT Keyboard: XkbRules: "xorg" (**) Option "XkbModel" "pc105" (**) AT Keyboard: XkbModel: "pc105" (**) Option "XkbLayout" "us" (**) AT Keyboard: XkbLayout: "us" (**) Option "CustomKeycodes" "off" (**) AT Keyboard: CustomKeycodes disabled (II) XINPUT: Adding extended input device "AT Keyboard" (type: KEYBOARD) (II) config/hal: Adding input device PS/2 Mouse (**) PS/2 Mouse: Device: "/dev/psm0" (==) PS/2 Mouse: Protocol: "Auto" (**) PS/2 Mouse: always reports core events (**) Option "Device" "/dev/psm0" (==) PS/2 Mouse: Emulate3Buttons, Emulate3Timeout: 50 (**) PS/2 Mouse: ZAxisMapping: buttons 4 and 5 (**) PS/2 Mouse: Buttons: 9 (**) PS/2 Mouse: Sensitivity: 1 (II) XINPUT: Adding extended input device "PS/2 Mouse" (type: MOUSE) (**) PS/2 Mouse: (accel) keeping acceleration scheme 1 (**) PS/2 Mouse: (accel) filter chain progression: 2.00 (**) PS/2 Mouse: (accel) filter stage 0: 20.00 ms (**) PS/2 Mouse: (accel) set acceleration profile 0 (**) Option "Device" "/dev/psm0" (II) PS/2 Mouse: SetupAuto: hw.iftype is 3, hw.model is 0 (II) PS/2 Mouse: SetupAuto: protocol is PS/2 (II) PS/2 Mouse: ps2EnableDataReporting: succeeded