[ 0.000000] Linux version 2.6.24-15-generic (buildd@palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Tue Apr 8 00:33:51 UTC 2008 (Ubuntu 2.6.24-15.27-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007f6d0000 (usable) [ 0.000000] BIOS-e820: 000000007f6d0000 - 000000007f6df000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007f6df000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] 1142MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] found SMP MP-table at 000f80e0 [ 0.000000] Entering add_active_range(0, 0, 521936) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 521936 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 521936 [ 0.000000] On node 0 totalpages: 521936 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2285 pages used for memmap [ 0.000000] HighMem zone: 290275 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP signature @ 0xC00F80B0 checksum 0 [ 0.000000] ACPI: RSDP 000F80B0, 0024 (r2 PTLTD ) [ 0.000000] ACPI: XSDT 7F6D4EFD, 0084 (r1 FSC PC 6040000 LTP 0) [ 0.000000] ACPI: FACP 7F6DBC2C, 00F4 (r3 INTEL CRESTLNE 6040000 ALAN 1) [ 0.000000] ACPI: DSDT 7F6D644B, 576D (r2 ECS___ F43_____ 6040000 INTL 20050624) [ 0.000000] ACPI: FACS 7F6DEFC0, 0040 [ 0.000000] ACPI: APIC 7F6DBD20, 0068 (r1 INTEL CRESTLNE 6040000 LOHR 5A) [ 0.000000] ACPI: HPET 7F6DBD88, 0038 (r1 INTEL CRESTLNE 6040000 LOHR 5A) [ 0.000000] ACPI: MCFG 7F6DBDC0, 003C (r1 INTEL CRESTLNE 6040000 LOHR 5A) [ 0.000000] ACPI: TMOR 7F6DBDFC, 0026 (r1 PTLTD 6040000 PTL 3) [ 0.000000] ACPI: APIC 7F6DBE22, 0068 (r1 PTLTD APIC 6040000 LTP 0) [ 0.000000] ACPI: SLIC 7F6DBE8A, 0176 (r1 FSC PC 6040000 LTP 0) [ 0.000000] ACPI: SSDT 7F6D616E, 02DD (r1 SataRe SataAhci 1000 INTL 20050624) [ 0.000000] ACPI: SSDT 7F6D609E, 00D0 (r1 BrtRef DD01BRT 1000 INTL 20050624) [ 0.000000] ACPI: SSDT 7F6D5586, 025F (r1 PmRef Cpu0Tst 3000 INTL 20050624) [ 0.000000] ACPI: SSDT 7F6D54E0, 00A6 (r1 PmRef Cpu1Tst 3000 INTL 20050624) [ 0.000000] ACPI: SSDT 7F6D4F81, 055F (r1 PmRef CpuPm 3000 INTL 20050624) [ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0 [ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:15 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 6:15 APIC version 20 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000) [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517859 [ 0.000000] Kernel command line: root=UUID=b126c101-7da7-4578-81e8-aa0a675fa171 ro splash vga=773 [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 1995.042 MHz processor. [ 10.844903] Console: colour dummy device 80x25 [ 10.844906] console [tty0] enabled [ 10.845308] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 10.845574] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 10.919064] Memory: 2057908k/2087744k available (2164k kernel code, 28652k reserved, 1006k data, 364k init, 1170240k highmem) [ 10.919076] virtual kernel memory layout: [ 10.919077] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB) [ 10.919078] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 10.919079] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 10.919080] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 10.919080] .init : 0xc041f000 - 0xc047a000 ( 364 kB) [ 10.919081] .data : 0xc031d2ad - 0xc0418dc4 (1006 kB) [ 10.919082] .text : 0xc0100000 - 0xc031d2ad (2164 kB) [ 10.919096] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 10.919134] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 10.919263] hpet clockevent registered [ 10.999226] Calibrating delay using timer specific routine.. 3994.21 BogoMIPS (lpj=7988437) [ 10.999248] Security Framework initialized [ 10.999255] SELinux: Disabled at boot. [ 10.999267] AppArmor: AppArmor initialized [ 10.999272] Failure registering capabilities with primary security module. [ 10.999280] Mount-cache hash table entries: 512 [ 10.999387] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000001 [ 10.999394] monitor/mwait feature present. [ 10.999397] using mwait in idle threads. [ 10.999401] CPU: L1 I cache: 32K, L1 D cache: 32K [ 10.999404] CPU: L2 cache: 4096K [ 10.999408] CPU: Physical Processor ID: 0 [ 10.999410] CPU: Processor Core ID: 0 [ 10.999412] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001 00000001 [ 10.999420] Compat vDSO mapped to ffffe000. [ 10.999432] Checking 'hlt' instruction... OK. [ 11.079494] SMP alternatives: switching to UP code [ 11.080800] Early unpacking initramfs... done [ 11.338490] ACPI: Core revision 20070126 [ 11.338526] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 11.396451] CPU0: Intel(R) Core(TM)2 Duo CPU T7300 @ 2.00GHz stepping 0a [ 11.396473] SMP alternatives: switching to SMP code [ 11.397027] Booting processor 1/1 eip 3000 [ 11.407433] Initializing CPU#1 [ 11.486948] Calibrating delay using timer specific routine.. 3989.88 BogoMIPS (lpj=7979769) [ 11.486954] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000001 [ 11.486958] monitor/mwait feature present. [ 11.486961] CPU: L1 I cache: 32K, L1 D cache: 32K [ 11.486962] CPU: L2 cache: 4096K [ 11.486964] CPU: Physical Processor ID: 0 [ 11.486965] CPU: Processor Core ID: 1 [ 11.486966] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001 00000001 [ 11.487669] CPU1: Intel(R) Core(TM)2 Duo CPU T7300 @ 2.00GHz stepping 0a [ 11.487704] Total of 2 processors activated (7984.10 BogoMIPS). [ 11.487874] ENABLING IO-APIC IRQs [ 11.488060] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 11.634960] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 11.654965] Brought up 2 CPUs [ 11.654987] CPU0 attaching sched-domain: [ 11.654990] domain 0: span 03 [ 11.654991] groups: 01 02 [ 11.654994] CPU1 attaching sched-domain: [ 11.654995] domain 0: span 03 [ 11.654997] groups: 02 01 [ 11.655176] net_namespace: 64 bytes [ 11.655186] Booting paravirtualized kernel on bare hardware [ 11.655599] Time: 14:51:35 Date: 05/11/08 [ 11.655645] NET: Registered protocol family 16 [ 11.655798] EISA bus registered [ 11.655803] ACPI: bus type pci registered [ 11.656180] PCI: PCI BIOS revision 3.00 entry at 0xfde31, last bus=8 [ 11.656184] PCI: Using configuration type 1 [ 11.656187] Setting up standard PCI resources [ 11.658238] ACPI: EC: Look up EC in DSDT [ 11.659669] ACPI: BIOS _OSI(Linux) query ignored [ 11.659673] ACPI: DMI System Vendor: OEM [ 11.659677] ACPI: DMI Product Name: OEM [ 11.659680] ACPI: DMI Product Version: [ 11.659683] ACPI: DMI Board Name: OEM [ 11.659686] ACPI: DMI BIOS Vendor: Phoenix Technologies LTD [ 11.659689] ACPI: DMI BIOS Date: 04/25/2007 [ 11.659692] ACPI: Please send DMI info above to linux-acpi@vger.kernel.org [ 11.659695] ACPI: If "acpi_osi=Linux" works better, please notify linux-acpi@vger.kernel.org [ 11.659882] ACPI: Interpreter enabled [ 11.659886] ACPI: (supports S0 S3 S4 S5) [ 11.659900] ACPI: Using IOAPIC for interrupt routing [ 11.667662] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62 [ 11.667666] ACPI: EC: driver started in poll mode [ 11.667703] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 11.668682] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 11.668688] PCI quirk: region 1180-11bf claimed by ICH6 GPIO [ 11.669677] PCI: Transparent bridge - 0000:00:1e.0 [ 11.669724] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 11.670033] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 11.670139] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] [ 11.670243] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] [ 11.670361] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 11.679405] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15) [ 11.679494] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 11.679581] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7 10 12 14 15) [ 11.679667] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 11.679753] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. [ 11.679840] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 11.679926] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 11.680013] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 11.680139] Linux Plug and Play Support v0.97 (c) Adam Belay [ 11.680165] pnp: PnP ACPI init [ 11.680172] ACPI: bus type pnp registered [ 11.681705] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 11.682046] pnp: PnP ACPI: found 10 devices [ 11.682050] ACPI: ACPI bus type pnp unregistered [ 11.682055] PnPBIOS: Disabled by ACPI PNP [ 11.682271] PCI: Using ACPI for IRQ routing [ 11.682275] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 11.782793] NET: Registered protocol family 8 [ 11.782797] NET: Registered protocol family 20 [ 11.782825] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 11.782831] hpet0: 3 64-bit timers, 14318180 Hz [ 11.783861] AppArmor: AppArmor Filesystem Enabled [ 11.786785] Time: tsc clocksource has been installed. [ 11.786797] Switched to high resolution mode on CPU 0 [ 11.786887] Switched to high resolution mode on CPU 1 [ 11.802768] system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved [ 11.802774] system 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved [ 11.802779] system 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved [ 11.802784] system 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved [ 11.802789] system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved [ 11.802793] system 00:01: iomem range 0xfed20000-0xfed3ffff could not be reserved [ 11.802798] system 00:01: iomem range 0xfed40000-0xfed44fff could not be reserved [ 11.802803] system 00:01: iomem range 0xfed45000-0xfed8ffff could not be reserved [ 11.802808] system 00:01: iomem range 0xf0401000-0xf0401fff has been reserved [ 11.802816] system 00:04: iomem range 0xfed00000-0xfed003ff could not be reserved [ 11.802824] system 00:06: ioport range 0x200-0x20f has been reserved [ 11.802828] system 00:06: ioport range 0x260-0x26f has been reserved [ 11.802832] system 00:06: ioport range 0x300-0x30f has been reserved [ 11.802836] system 00:06: ioport range 0x378-0x387 has been reserved [ 11.802840] system 00:06: ioport range 0x3f0-0x3ff could not be reserved [ 11.802844] system 00:06: ioport range 0x680-0x69f has been reserved [ 11.802848] system 00:06: ioport range 0x800-0x80f has been reserved [ 11.802852] system 00:06: ioport range 0x1000-0x107f has been reserved [ 11.802856] system 00:06: ioport range 0x1180-0x11bf has been reserved [ 11.802860] system 00:06: ioport range 0x1640-0x164f has been reserved [ 11.802865] system 00:06: ioport range 0xfe00-0xfe00 has been reserved [ 11.833199] PCI: Bridge: 0000:00:1c.0 [ 11.833204] IO window: 2000-2fff [ 11.833211] MEM window: f6000000-f7ffffff [ 11.833217] PREFETCH window: f0000000-f1ffffff [ 11.833224] PCI: Bridge: 0000:00:1c.2 [ 11.833228] IO window: 3000-3fff [ 11.833235] MEM window: f8000000-f9ffffff [ 11.833241] PREFETCH window: f2000000-f3ffffff [ 11.833248] PCI: Bridge: 0000:00:1c.3 [ 11.833252] IO window: 4000-4fff [ 11.833259] MEM window: fa000000-fbffffff [ 11.833264] PREFETCH window: f4000000-f5ffffff [ 11.833271] PCI: Bridge: 0000:00:1e.0 [ 11.833274] IO window: disabled. [ 11.833280] MEM window: disabled. [ 11.833285] PREFETCH window: disabled. [ 11.833316] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 16 [ 11.833325] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 11.833350] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 17 [ 11.833358] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 11.833382] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 18 [ 11.833389] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 11.833403] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 11.833413] NET: Registered protocol family 2 [ 11.870751] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 11.870939] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 11.871288] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 11.871450] TCP: Hash tables configured (established 131072 bind 65536) [ 11.871455] TCP reno registered [ 11.882796] checking if image is initramfs... it is [ 12.437940] Freeing initrd memory: 7350k freed [ 12.438583] audit: initializing netlink socket (disabled) [ 12.438599] audit(1210517495.277:1): initialized [ 12.438792] highmem bounce pool size: 64 pages [ 12.440386] VFS: Disk quotas dquot_6.5.1 [ 12.440450] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 12.440562] io scheduler noop registered [ 12.440565] io scheduler anticipatory registered [ 12.440569] io scheduler deadline registered [ 12.440579] io scheduler cfq registered (default) [ 12.440591] Boot video device is 0000:00:02.0 [ 12.440796] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 12.440855] assign_interrupt_mode Found MSI capability [ 12.440907] Allocate Port Service[0000:00:1c.0:pcie00] [ 12.440935] Allocate Port Service[0000:00:1c.0:pcie02] [ 12.441029] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 12.441088] assign_interrupt_mode Found MSI capability [ 12.441137] Allocate Port Service[0000:00:1c.2:pcie00] [ 12.441162] Allocate Port Service[0000:00:1c.2:pcie02] [ 12.441256] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 12.441314] assign_interrupt_mode Found MSI capability [ 12.441362] Allocate Port Service[0000:00:1c.3:pcie00] [ 12.441390] Allocate Port Service[0000:00:1c.3:pcie02] [ 12.441611] isapnp: Scanning for PnP cards... [ 12.795778] isapnp: No Plug & Play device found [ 12.816104] Real Time Clock Driver v1.12ac [ 12.816297] hpet_resources: 0xfed00000 is busy [ 12.816321] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 12.817272] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 12.817328] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 12.817409] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 12.821669] i8042.c: Detected active multiplexing controller, rev 1.1. [ 12.824150] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 12.824156] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 12.824160] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 12.824163] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 12.824167] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 12.843214] mice: PS/2 mouse device common for all mice [ 12.843303] EISA: Probing bus 0 at eisa.0 [ 12.843311] Cannot allocate resource for EISA slot 1 [ 12.843314] Cannot allocate resource for EISA slot 2 [ 12.843318] Cannot allocate resource for EISA slot 3 [ 12.843321] Cannot allocate resource for EISA slot 4 [ 12.843341] EISA: Detected 0 cards. [ 12.843345] cpuidle: using governor ladder [ 12.843348] cpuidle: using governor menu [ 12.843415] NET: Registered protocol family 1 [ 12.843439] Using IPI No-Shortcut mode [ 12.843464] registered taskstats version 1 [ 12.843552] Magic number: 8:642:889 [ 12.843593] hash matches device 0000:00:1f.2 [ 12.843602] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 12.843605] EDD information not available. [ 12.843786] Freeing unused kernel memory: 364k freed [ 12.886331] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 13.035436] vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 1536k, total 7616k [ 13.035444] vesafb: mode is 1024x768x8, linelength=1024, pages=8 [ 13.035447] vesafb: scrolling: redraw [ 13.035450] vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0 [ 13.035540] Console: switching to colour frame buffer device 128x48 [ 13.041981] fb0: VESA VGA frame buffer device [ 14.155903] vga16fb: initializing [ 14.155906] vga16fb: mapped to 0xc00a0000 [ 14.155952] fb1: VGA16 VGA frame buffer device [ 14.164412] fuse init (API version 7.9) [ 14.178824] ACPI: SSDT 7F6D5D5C, 027A (r1 PmRef Cpu0Ist 3000 INTL 20050624) [ 14.181048] ACPI: SSDT 7F6D57E5, 04F2 (r1 PmRef Cpu0Cst 3001 INTL 20050624) [ 14.182715] Monitor-Mwait will be used to enter C-1 state [ 14.182717] Monitor-Mwait will be used to enter C-2 state [ 14.182794] ACPI: CPU0 (power states: C1[C1] C2[C2]) [ 14.182798] ACPI: Processor [CPU0] (supports 8 throttling states) [ 14.182992] ACPI: SSDT 7F6D5FD6, 00C8 (r1 PmRef Cpu1Ist 3000 INTL 20050624) [ 14.183158] ACPI: SSDT 7F6D5CD7, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624) [ 14.183937] ACPI: CPU1 (power states: C1[C1] C2[C2]) [ 14.183941] ACPI: Processor [CPU1] (supports 8 throttling states) [ 14.185778] ACPI: Thermal Zone [THRM] (29 C) [ 14.357365] usbcore: registered new interface driver usbfs [ 14.357384] usbcore: registered new interface driver hub [ 14.357406] usbcore: registered new device driver usb [ 14.358558] USB Universal Host Controller Interface driver v3.0 [ 14.358600] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 19 [ 14.358610] PCI: Setting latency timer of device 0000:00:1a.0 to 64 [ 14.358614] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 14.358792] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 14.358822] uhci_hcd 0000:00:1a.0: irq 19, io base 0x00001820 [ 14.358927] usb usb1: configuration #1 chosen from 1 choice [ 14.358946] hub 1-0:1.0: USB hub found [ 14.358950] hub 1-0:1.0: 2 ports detected [ 14.465281] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 20 [ 14.465292] PCI: Setting latency timer of device 0000:00:1a.1 to 64 [ 14.465296] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 14.465316] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2 [ 14.465348] uhci_hcd 0000:00:1a.1: irq 20, io base 0x00001840 [ 14.465442] usb usb2: configuration #1 chosen from 1 choice [ 14.465461] hub 2-0:1.0: USB hub found [ 14.465465] hub 2-0:1.0: 2 ports detected [ 14.556392] SCSI subsystem initialized [ 14.562755] libata version 3.00 loaded. [ 14.569250] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 21 [ 14.569260] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 14.569265] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 14.569283] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3 [ 14.569314] uhci_hcd 0000:00:1d.0: irq 21, io base 0x00001860 [ 14.569411] usb usb3: configuration #1 chosen from 1 choice [ 14.569432] hub 3-0:1.0: USB hub found [ 14.569436] hub 3-0:1.0: 2 ports detected [ 14.673164] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 18 [ 14.673176] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 14.673180] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 14.673198] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4 [ 14.673230] uhci_hcd 0000:00:1d.1: irq 18, io base 0x00001880 [ 14.673326] usb usb4: configuration #1 chosen from 1 choice [ 14.673345] hub 4-0:1.0: USB hub found [ 14.673349] hub 4-0:1.0: 2 ports detected [ 14.777105] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 17 [ 14.777115] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 14.777119] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 14.777138] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5 [ 14.777168] uhci_hcd 0000:00:1d.2: irq 17, io base 0x000018a0 [ 14.777264] usb usb5: configuration #1 chosen from 1 choice [ 14.777283] hub 5-0:1.0: USB hub found [ 14.777288] hub 5-0:1.0: 2 ports detected [ 14.881073] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 17 [ 14.881086] PCI: Setting latency timer of device 0000:00:1a.7 to 64 [ 14.881090] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 14.881109] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6 [ 14.885015] ehci_hcd 0000:00:1a.7: debug port 1 [ 14.885022] PCI: cache line size of 32 is not supported by device 0000:00:1a.7 [ 14.885027] ehci_hcd 0000:00:1a.7: irq 17, io mem 0xfc404800 [ 14.900952] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 14.901037] usb usb6: configuration #1 chosen from 1 choice [ 14.901057] hub 6-0:1.0: USB hub found [ 14.901062] hub 6-0:1.0: 4 ports detected [ 15.005021] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 21 [ 15.005039] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 15.005044] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 15.005075] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7 [ 15.008973] ehci_hcd 0000:00:1d.7: debug port 1 [ 15.008980] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 15.008985] ehci_hcd 0000:00:1d.7: irq 21, io mem 0xfc404c00 [ 15.024894] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 15.025039] usb usb7: configuration #1 chosen from 1 choice [ 15.025071] hub 7-0:1.0: USB hub found [ 15.025078] hub 7-0:1.0: 6 ports detected [ 15.124975] ahci 0000:00:1f.2: version 3.0 [ 15.125005] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 18 [ 15.764460] usb 3-1: new low speed USB device using uhci_hcd and address 2 [ 15.939721] usb 3-1: configuration #1 chosen from 1 choice [ 15.954778] usbcore: registered new interface driver hiddev [ 15.967816] input: Genius Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1:1.0/input/input2 [ 15.996365] input,hidraw0: USB HID v1.10 Mouse [Genius Optical Mouse] on usb-0000:00:1d.0-1 [ 15.996382] usbcore: registered new interface driver usbhid [ 15.996386] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 16.129268] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode [ 16.129274] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part [ 16.129282] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 16.129502] scsi0 : ahci [ 16.129628] scsi1 : ahci [ 16.129732] scsi2 : ahci [ 16.129802] ata1: SATA max UDMA/133 abar m2048@0xfc404000 port 0xfc404100 irq 220 [ 16.129806] ata2: SATA max UDMA/133 abar m2048@0xfc404000 port 0xfc404180 irq 220 [ 16.129809] ata3: SATA max UDMA/133 abar m2048@0xfc404000 port 0xfc404200 irq 220 [ 16.603974] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 16.653368] ata1.00: ATA-7: WDC WD1600BEVS-00RST0, 04.01G04, max UDMA/133 [ 16.653373] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 16.654186] ata1.00: configured for UDMA/133 [ 16.964758] ata2: SATA link down (SStatus 0 SControl 300) [ 17.275577] ata3: SATA link down (SStatus 0 SControl 300) [ 17.275735] scsi 0:0:0:0: Direct-Access ATA WDC WD1600BEVS-0 04.0 PQ: 0 ANSI: 5 [ 17.275980] r8169 Gigabit Ethernet driver 2.2LK loaded [ 17.276008] ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 19 (level, low) -> IRQ 18 [ 17.276027] PCI: Setting latency timer of device 0000:06:00.0 to 64 [ 17.276325] eth0: RTL8101e at 0xf8a0e000, 00:03:0d:64:d2:30, XID 34000000 IRQ 219 [ 17.277237] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 19 (level, low) -> IRQ 18 [ 17.277268] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 17.277280] ACPI: PCI interrupt for device 0000:00:1f.1 disabled [ 17.280138] ata_piix 0000:00:1f.1: version 2.12 [ 17.280149] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 19 (level, low) -> IRQ 18 [ 17.280172] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 17.280588] scsi3 : ata_piix [ 17.281110] scsi4 : ata_piix [ 17.281566] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14 [ 17.281569] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15 [ 17.285097] Driver 'sd' needs updating - please use bus_type methods [ 17.292610] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) [ 17.292627] sd 0:0:0:0: [sda] Write Protect is off [ 17.292631] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 17.292654] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 17.292713] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) [ 17.292727] sd 0:0:0:0: [sda] Write Protect is off [ 17.292730] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 17.292753] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 17.292757] sda: sda1 sda2 < sda5 > [ 17.362563] sd 0:0:0:0: [sda] Attached SCSI disk [ 17.366622] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 17.544370] Attempting manual resume [ 17.544373] swsusp: Resume From Partition 8:5 [ 17.544375] PM: Checking swsusp image. [ 17.544566] PM: Resume from disk failed. [ 17.599843] ata4.00: ATAPI: Optiarc DVD RW AD-7540A, 1.01, max UDMA/33 [ 17.601510] kjournald starting. Commit interval 5 seconds [ 17.601524] EXT3-fs: mounted filesystem with ordered data mode. [ 17.771688] ata4.00: configured for UDMA/33 [ 17.939480] scsi 3:0:0:0: CD-ROM Optiarc DVD RW AD-7540A 1.01 PQ: 0 ANSI: 5 [ 17.939576] scsi 3:0:0:0: Attached scsi generic sg1 type 5 [ 31.007589] input: PC Speaker as /devices/platform/pcspkr/input/input3 [ 31.128458] iTCO_vendor_support: vendor-support=0 [ 31.152420] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) [ 31.228385] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 31.276379] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 31.510108] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b1, caps: 0xa04713/0x200000 [ 31.547944] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input4 [ 31.560623] ACPI: AC Adapter [AC0] (on-line) [ 31.605600] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060) [ 31.605639] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 31.640387] input: Power Button (FF) as /devices/virtual/input/input5 [ 31.699097] ACPI: Power Button (FF) [PWRF] [ 31.699176] input: Power Button (CM) as /devices/virtual/input/input6 [ 31.767066] ACPI: Power Button (CM) [PWRB] [ 31.767119] input: Lid Switch as /devices/virtual/input/input7 [ 31.799090] ACPI: Lid Switch [LID] [ 31.799137] input: Sleep Button (CM) as /devices/virtual/input/input8 [ 31.807032] Linux agpgart interface v0.102 [ 31.847006] ACPI: Sleep Button (CM) [SLPB] [ 31.856803] agpgart: Detected an Intel 965GM Chipset. [ 31.858530] agpgart: Detected 7676K stolen memory. [ 31.871592] agpgart: AGP aperture is 256M @ 0xd0000000 [ 32.068063] ACPI: Battery Slot [BAT0] (battery present) [ 32.097413] ACPI Error (utobject-0502): Unsupported Reference opcode=88 in object f7d48c30 [20070126] [ 32.198891] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input9 [ 32.250792] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 32.264856] Driver 'sr' needs updating - please use bus_type methods [ 32.270484] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 32.270488] Uniform CD-ROM driver Revision: 3.20 [ 32.270530] sr 3:0:0:0: Attached scsi CD-ROM sr0 [ 32.344494] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.0 [ 32.344498] iwl3945: Copyright(c) 2003-2007 Intel Corporation [ 32.344628] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 18 (level, low) -> IRQ 17 [ 32.344642] PCI: Setting latency timer of device 0000:04:00.0 to 64 [ 32.344660] iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection [ 32.846967] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22 [ 32.846995] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 32.880783] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS... [ 32.889395] iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels [ 32.889708] wmaster0: Selected rate control algorithm 'iwl-3945-rs' [ 33.065959] udev: renamed network interface wlan0 to eth2 [ 33.098397] Monitor-Mwait will be used to enter C-3 state [ 33.203577] lp: driver loaded but no devices found [ 33.300737] [drm] Initialized drm 1.1.0 20060810 [ 33.459163] Ethernet Channel Bonding Driver: v3.2.3 (December 6, 2007) [ 33.459166] bonding: Warning: either miimon or arp_interval and arp_ip_target module parameters must be specified, otherwise bonding will not detect link failures! see bonding.txt for details. [ 33.536861] Adding 6048432k swap on /dev/sda5. Priority:-1 extents:1 across:6048432k [ 34.074658] EXT3 FS on sda1, internal journal [ 34.645370] Clocksource tsc unstable (delta = -78263424678 ns) [ 34.649363] Time: hpet clocksource has been installed. [ 36.155187] ip_tables: (C) 2000-2006 Netfilter Core Team [ 36.680949] No dock devices found. [ 39.431646] NET: Registered protocol family 10 [ 39.431866] lo: Disabled Privacy Extensions [ 39.432828] ADDRCONF(NETDEV_UP): bond0: link is not ready [ 40.020494] ppdev: user-space parallel port driver [ 40.393799] audit(1210510324.451:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5285 profile="/usr/sbin/cupsd" namespace="default" [ 47.303527] apm: BIOS not found. [ 59.091296] vboxdrv: Trying to deactivate the NMI watchdog permanently... [ 59.091304] vboxdrv: Successfully done. [ 59.091375] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 59.091379] vboxdrv: Successfully loaded version 1.5.6 (interface 0x00050002). [ 59.318642] tun: Universal TUN/TAP device driver, 1.6 [ 59.318650] tun: (C) 1999-2004 Max Krasnyansky [ 62.589286] r8169: eth0: link down [ 62.593700] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 62.721447] ADDRCONF(NETDEV_UP): eth2: link is not ready [ 62.726859] Bluetooth: Core ver 2.11 [ 62.727256] NET: Registered protocol family 31 [ 62.727262] Bluetooth: HCI device and connection manager initialized [ 62.727269] Bluetooth: HCI socket layer initialized [ 62.770178] Bluetooth: L2CAP ver 2.9 [ 62.770186] Bluetooth: L2CAP socket layer initialized [ 63.183185] Bluetooth: RFCOMM socket layer initialized [ 63.183204] Bluetooth: RFCOMM TTY layer initialized [ 63.183207] Bluetooth: RFCOMM ver 1.8 [ 65.575086] ACPI Error (utobject-0502): Unsupported Reference opcode=88 in object f7275258 [20070126] [ 65.579075] ACPI Error (utobject-0502): Unsupported Reference opcode=88 in object f71e56e0 [20070126] [ 65.733696] ACPI Error (utobject-0502): Unsupported Reference opcode=88 in object f71e5730 [20070126] [ 66.824604] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 19 [ 66.824620] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 66.824728] [drm] Initialized i915 1.6.0 20060119 on minor 0 [ 67.101287] ACPI Error (utobject-0502): Unsupported Reference opcode=88 in object f7275348 [20070126] [ 67.144026] ACPI Error (utobject-0502): Unsupported Reference opcode=88 in object f71e57d0 [20070126] [ 67.903493] ACPI Error (utobject-0502): Unsupported Reference opcode=88 in object f71e5910 [20070126] [ 105.465987] CPU0 attaching NULL sched-domain. [ 105.465998] CPU1 attaching NULL sched-domain. [ 105.485264] CPU0 attaching sched-domain: [ 105.485268] domain 0: span 03 [ 105.485269] groups: 01 02 [ 105.485272] CPU1 attaching sched-domain: [ 105.485274] domain 0: span 03 [ 105.485275] groups: 02 01 [ 279.942683] NET: Registered protocol family 17 [ 298.271320] eth2: Initial auth_alg=0 [ 298.271332] eth2: authenticate with AP 00:01:38:6d:f3:11 [ 298.308013] eth2: RX authentication from 00:01:38:6d:f3:11 (alg=0 transaction=2 status=0) [ 298.308023] eth2: authenticated [ 298.308028] eth2: associate with AP 00:01:38:6d:f3:11 [ 298.325127] eth2: RX AssocResp from 00:01:38:6d:f3:11 (capab=0x431 status=0 aid=4) [ 298.325136] eth2: associated [ 298.325283] eth2: WMM queue=2 aci=0 acm=0 aifs=3 cWmin=15 cWmax=1023 burst=0 [ 298.327209] eth2: WMM queue=3 aci=1 acm=0 aifs=7 cWmin=15 cWmax=1023 burst=0 [ 298.327635] eth2: WMM queue=1 aci=2 acm=0 aifs=2 cWmin=7 cWmax=15 burst=30 [ 298.327999] eth2: WMM queue=0 aci=3 acm=0 aifs=2 cWmin=3 cWmax=7 burst=15 [ 298.330071] ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready [ 312.853536] eth2: no IPv6 routers present