<html><body style="word-wrap: break-word; -webkit-nbsp-mode: space; -webkit-line-break: after-white-space; "> <div>hmm, well, some other things to try, from 'man xorg.conf' are:</div><div> </div><div>Display Section</div><div><html> </html><html> ViewPort x0 y0</html><html> This optional entry sets the upper left corner of the initial</html><html> display. This is only relevant when the virtual screen resolu‐</html><html> tion is different from the resolution of the initial video mode.</html><html> If this entry is not given, then the initial display will be</html><html> centered in the virtual display area.</html><div> </div><div>Monitor Section</div><div> </div><div><html> Option "Position" "x y"</html><html> This optional entry specifies the position of the monitor within</html><html> the X screen. (RandR 1.2-supporting drivers only)</html><html> </html><html> </html></div></div> <div><html>On Apr 24, 2008, at 1:36 AM, Schumi Imor wrote:</html> <blockquote type="cite">Hello Dan...et all. adding +50+50 to the resolution with xrandr does not do anything. When I tried xrandr -s 640x480, the system change resolution to VGA. When I redid xrandr 800x600, I was back in SVGA. But adding some values +50+50 to either efforts, does not change anything... not even a screen reset/flicker, as if it ignored the command altogether. Any ideas? Thanks <div class="gmail_quote">On Thu, Apr 24, 2008 at 12:38 AM, Dan B. Phung <<a href="mailto:phung@cs.columbia.edu">phung@cs.columbia.edu</a>> wrote: <blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;"> First you should try messing with how much you need to shift using xrandr...if that's available on the device. do something like: xrandr -s 800x600+50+50 if you don't have xrandr, then try adding the "+50+50" to your xorg.conf, and messing with the settings till you align your screen. -dan Schumi Imor wrote: <blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); padding-left: 1ex;"><div><div></div><div class="Wj3C7c"> Hello, I have an embedded x86 device with a 800x600 LCD monitor (this is the maximum hw resolution). I was able to install and run debian with xserver-xorg-core and xorg packages on it. But when I run X, the screen/window is shifted by 1 inch to the left. The same when I run 640x480. But when I run at higher resolutions, although I can see the whole screen and will have to move the mouse to see all corners, the window edge look fine. What setting in the xorg.conf or somewhere else can I change to move the windows/screen right by 1 inch? Thanks in advance. xorg.conf file: Section "ServerLayout" Identifier "X.org Configured" Screen 0 "Screen0" 0 0 InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "Files" RgbPath "/etc/X11/rgb" ModulePath "/usr/lib/xorg/modules" FontPath "/usr/share/fonts/X11/misc" FontPath "/usr/X11R6/lib/X11/fonts/misc" FontPath "/usr/share/fonts/X11/cyrillic" FontPath "/usr/share/fonts/X11/100dpi/:unscaled" FontPath "/usr/share/fonts/X11/75dpi/:unscaled" FontPath "/usr/share/fonts/X11/Type1" FontPath "/usr/X11R6/lib/X11/fonts/Type1" FontPath "/usr/share/fonts/X11/100dpi" FontPath "/usr/share/fonts/X11/75dpi" FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" EndSection Section "Module" Load "extmod" Load "record" Load "dbe" Load "glx" Load "xtrap" Load "dri" Load "type1" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/mouse" Option "ZAxisMapping" "4 5 6 7" EndSection Section "Monitor" #DisplaySize 360 270 # mm Identifier "Monitor0" VendorName "LCD" ModelName " TFT LCD" ### Comment all HorizSync and VertSync values to use DDC: HorizSync 20.0 - 92.0 VertRefresh 50.0 - 75.0 Option "DPMS" EndSection Section "Device" ### Available Driver options are:- ### Values: : integer, <f>: float, <bool>: "True"/"False", ### <string>: "String", <freq>: "<f> Hz/kHz/MHz" ### [arg]: arg optional #Option "NoAccel" # [<bool>] #Option "SWcursor" # [<bool>] #Option "ColorKey" # #Option "CacheLines" # #Option "Dac6Bit" # [<bool>] #Option "DRI" # [<bool>] #Option "NoDDC" # [<bool>] #Option "ShowCache" # [<bool>] #Option "XvMCSurfaces" # #Option "PageFlip" # [<bool>] Identifier "Card0" Driver "i810" VendorName "Intel Corporation" BoardName "82852/855GM Integrated Graphics Device" BusID "PCI:0:2:0" EndSection Section "Screen" Identifier "Screen0" Device "Card0" Monitor "Monitor0" SubSection "Display" Viewport 0 0 Depth 16 Modes "800x600" EndSubSection EndSection </div></div> ------------------------------------------------------------------------ _______________________________________________ xorg mailing list <a href="mailto:xorg@lists.freedesktop.org" target="_blank">xorg@lists.freedesktop.org</a> <a href="http://lists.freedesktop.org/mailman/listinfo/xorg" target="_blank">http://lists.freedesktop.org/mailman/listinfo/xorg</a> </blockquote> </blockquote></div> </blockquote></div> </body></html>