<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"> <html> <head> <meta content="text/html;charset=ISO-8859-1" http-equiv="Content-Type"> <title></title> </head> <body bgcolor="#ffffff" text="#000000"> I have test a nvtv software, when start show some information about not supported driver CH7009 features but if I select a tv-out with NTSC it's work in TV full screen, but if select a PAL (Italy TV) I have a black border. I have only a problem, I don't have a screen in the center on TV. Is it possibile with another software move screen? Thanks Matteo Eric Anholt wrote: <blockquote cite="mid:1204664590.99454.57.camel@localhost" type="cite"> <pre wrap="">On Tue, 2008-03-04 at 15:03 +0100, Matteo Manzinello wrote: </pre> <blockquote type="cite"> <pre wrap="">Hi, I have a MB with Intel 845GV Chrontel CH7009/CH7017 TV-out encoder and use a Debian Etch distribution. With default installation use a i810 driver in xorg.conf. I have only TV-out connector with S-Video but have a problem with a screen, there are the black border. Is it possibile overscan or extend the image? </pre> </blockquote> <pre wrap=""> We don't currently support CH7xxx DVO TV out, only DVI out. We are currently not working on improvements to DVO drivers, as our plans are all full of supporting features on newer hardware that intel is putting out themselves. However, the Chrontel specs are open, so anybody who wanted to write a driver for it for xf86-video-intel could, and they would have the opportunity to control overscan and other options in the way that the old pre-2.0 driver couldn't. </pre> </blockquote> </body> </html>