Whops I sent the wrong log. Here's the current one and my entire log is at: <a href="http://www.mashtizadeh.com/Xorg.0.log">http://www.mashtizadeh.com/Xorg.0.log</a> Once again it shows a blank monitor with a garbled cursor only showing vertical lines of trash. (II) RADEON(0): Legacy BIOS detected (II) RADEON(0): LVDS port is not in connector table, added in. (WW) RADEON(0): Unknown DDCType 5 found (WW) RADEON(0): LCD DDC Info Table found! (II) RADEON(0): Connector0: DDCType-0, DACType-1, TMDSType--1, ConnectorType-1 (II) RADEON(0): Connector1: DDCType-4, DACType-0, TMDSType--1, ConnectorType-2 (**) RADEON(0): MonitorLayout Option: Monitor1--Type LVDS, Monitor2--Type CRT (II) RADEON(0): DDC Type: 4, Detected Type: 0 (II) RADEON(0): (II) RADEON(0): Reversed DAC decteced (II) RADEON(0): Primary: Monitor -- LVDS Connector -- VGA DAC Type -- Primary TMDS Type -- NONE DDC Type -- CRT2_DDC (II) RADEON(0): Secondary: Monitor -- CRT Connector -- Proprietary DAC Type -- TVDAC/ExtDAC TMDS Type -- NONE DDC Type -- NONE (II) RADEON(0): PLL parameters: rf=1432 rd=6 min=20000 max=40000; xclk=20500 (WW) RADEON(0): Failed to detect secondary monitor DDC, default HSync and VRefresh used (==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0) (II) RADEON(0): Validating modes on Primary head --------- (II) RADEON(0): Panel ID string: SEC (II) RADEON(0): Panel Size from BIOS: 1400x1050 (II) RADEON(0): BIOS provided dividers will be used. (II) RADEON(0): Total number of valid DDC mode(s) found: 0 (II) RADEON(0): Valid mode using on-chip RMX: 800x600 (II) RADEON(0): Total number of valid FP mode(s) found: 1 (II) RADEON(0): Validating CRTC2 modes for MergedFB ------------ (II) RADEON(0): CRT2 Monitor: Using hsync range of 30.00-110.00 kHz (II) RADEON(0): CRT2 Monitor: Using vrefresh range of 50.00-150.00 Hz (II) RADEON(0): Clock range: 20.00 to 400.00 MHz On 4/23/07, Alex Deucher <<a href="mailto:alexdeucher@gmail.com">alexdeucher@gmail.com</a>> wrote: > On 4/23/07, Ali Mashtizadeh <<a href="mailto:mashtizadeh@gmail.com">mashtizadeh@gmail.com </a>> wrote: > > So I looked around on mailing lists and bug reports but I can't find > > anything too similar to the problem I have on my HP NX6125 Its an ATI > > Xpress 200M. For some reason when I get the dual head "working" I have > > a blank second screen which shows either random pattern of red pixels > > or completely blank. The cursor shows up as a block and the resolution > > seems to be fine. I read in a few places that the IGP chipsets have > > memory initialization problems. I can believe that thats likely what > > is happening because only the hardware cursor shows up. Anyone have > > similar problems? I've tried the recent 6.6.191 drivers as well. FYI I > > can get clone mode working by using the BIOS key, then running X and > > using the BIOS key again and that seems to be reliable. But I really > > would like dual head working. > > > > Chipset: 200M 5955 (PCIE) > > .... > > (II) RADEON(0): Legacy BIOS detected > > (II) RADEON(0): LVDS port is not in connector table, added in. > > (WW) RADEON(0): Unknown DDCType 5 found > > (WW) RADEON(0): LCD DDC Info Table found! > > (II) RADEON(0): Connector0: DDCType-0, DACType-1, TMDSType--1, ConnectorType-1 > > (II) RADEON(0): Connector1: DDCType-4, DACType-0, TMDSType--1, ConnectorType-2 > > (II) RADEON(0): DDC Type: 4, Detected Type: 0 > > (II) RADEON(0): > > (II) RADEON(0): Primary: > > Monitor -- LVDS > > Connector -- VGA > > DAC Type -- Primary > > TMDS Type -- NONE > > DDC Type -- CRT2_DDC > > (II) RADEON(0): Secondary: > > Monitor -- NONE > > Connector -- Proprietary > > DAC Type -- TVDAC/ExtDAC > > TMDS Type -- NONE > > DDC Type -- NONE > > (II) RADEON(0): PLL parameters: rf=1432 rd=6 min=20000 max=40000; xclk=20500 > > (WW) RADEON(0): Failed to detect secondary monitor, MergedFB/Clone mode disabled > > looks like it failed to detect the secondary monitor. Can you try > forcing mergedfb on? you might also have to specify the monitorlayout > (e.g., Option "Monitorlayout" "LVDS, CRT") and hsync and vrefresh > ranges for your monitor. See the radeon man page for more. > -- Ali Mashtizadeh علی مشتی زاده