<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2//EN"> <HTML> <HEAD> <META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=iso-8859-2"> <META NAME="Generator" CONTENT="MS Exchange Server version 6.5.7638.1"> <TITLE>PAL tv-out with i810 (965G)</TITLE> </HEAD> <BODY>  I am trying to get PAL TV-out to work on my i810 system, but I am stacked. Here is my configuration: 1. Foxconn g9657ma motherboard (965g embedded) 2. Prolink ADD-7312-DVI-T ADD2 card (Chrontel ch7312 chip) 3. 3xRCA + S-Video <==> Scart converter connected to the S-video port of the add2 card 4. SCART connected to PAL TV (has only SCARt input, rather old) There is no monitor connected, only the TV set. When I boot up the system, I can get picture on the TV, but only black and white. X can start, too, but - only in black and white, and - not really filling the screen. I guess (part of) the problem is that the add2 card outputs NTSC picture, but my TV needs PAL. But how can I change the output mode of the add2 card? There is no such option in my BIOS, so I guess I should go with the mode-setting branch. I have tried it (from the version in Debian Unstable, from Debian Experimental, and from GIT), but neither of them outputted color picture. I googled around, and I found that people are using options like "TVStandard" and "TVOutFormat" to control the behavior of the TV-Out, but these options do not seem to work for me. The X log says they are ignored, and I can not find any trace of them neither in the i810 man page, nor the i810 sources. So, could someone please tell me how do I configure PAL output? Do I need to use xrandr for this? If yes, where can I find some documentation for it? Thank you for your help: Kristof Csillag </BODY> </HTML>