<html><head><style type="text/css"></style></head><body><div style="font-family:times new roman, new york, times, serif;font-size:12pt"><div style="font-family: times new roman,new york,times,serif; font-size: 12pt;"><div>01:01.0 VGA compatible controller: S3 Inc. Trio 64 3D (rev 01) Well, which one do you have? I have the S3 Trio64 3D and your question was about the S3 Trio64 (3D). ----- Original Message ---- From: Ma Weimin <mwmb2@hotmail.com> To: shawn.starr@rogers.com Cc: alexdeucher@gmail.com; xorg@lists.freedesktop.org Sent: Wednesday, April 12, 2006 3:01:52 AM Subject: Re: Does Xorg 6.9/7.0 support the old PCI graphic card S3 Trio64? <div>S3 Trio3D 64 and S3 Trio64 are different cards Weimin >From: Shawn Starr <shawn.starr@rogers.com> >To: "Ma Weimin" <mwmb2@hotmail.com> >CC: alexdeucher@gmail.com, xorg@lists.freedesktop.org >Subject: Re: Does Xorg 6.9/7.0 support the old PCI graphic card S3 Trio64? >Date: Wed, 12 Apr 2006 01:58:53 -0400 > > >On Tuesday 11 April 2006 22:51, Ma Weimin wrote: > > Hello Shawn, > > > > How many video ram has your s3 card? > >The onboard device has 4MB total. > >The video driver part of my xorg.conf: > ># ********************************************************************** ># Graphics device section ># ********************************************************************** ># Device configured by xorgconfig: > >Section "Device" > Identifier "** S3 ViRGE (generic) [s3virge]" > Driver "s3virge" > VideoRam 4096 > Option "fifo_moderate" "on" > #Option "RenderAccel" "true" > #Option "AccelMethod" "xaa" #"exa" >EndSection > >The Trio64 3D needs the s3virge driver. > > > > If i assign a wrong number, will that > > be problem? Could you send me a copy of your xorg.conf? > > > > Weimin > > > > >From: Shawn Starr <shawn.starr@rogers.com> > > >Reply-To: Shawn Starr <shawn.starr@rogers.com> > > >To: Alex Deucher <alexdeucher@gmail.com>, Ma Weimin <mwmb2@hotmail.com> > > >CC: xorg@lists.freedesktop.org > > >Subject: Re: Does Xorg 6.9/7.0 support the old PCI graphic card S3 Trio64? > > >Date: Tue, 11 Apr 2006 10:43:27 -0700 (PDT) > > > > > >Should work, I have an onboard S3 Trio3D 64 > > >01:01.0 VGA compatible controller: S3 Inc. Trio 64 3D (rev 01) > > > > > >Xorg works ok with the driver, though I have to jiggle the xorg config to > > > > get it to use the right refresh rate. > > > > >Shawn. > > > > > >----- Original Message ---- > > >From: Alex Deucher <alexdeucher@gmail.com> > > >To: Ma Weimin <mwmb2@hotmail.com> > > >Cc: xorg@lists.freedesktop.org > > >Sent: Tuesday, April 11, 2006 9:19:54 AM > > >Subject: Re: Does Xorg 6.9/7.0 support the old PCI graphic card S3 Trio64? > > > > > >On 4/11/06, Ma Weimin <mwmb2@hotmail.com> wrote: > > > > Hi, > > > > > > > > my current system is: Mandriva 2006, Xorg 6.9.0 and integrated graphic > > > > card > > > > > > Intel i810. And it works perfect. > > > > > > > > I'm planning to use dual monitors with a sencond graphic cards, which > > > > is a > > > > > > very old PCI card S3 Trio64. It works on Widnows 98, so there's no > > > > problem > > > > > > with the card itself. I did exactly following the instructions of > > > > xinerama. > > > > > > But i failed to get Trio64 to work. Here are the informations. > > > > > >It should be supported by the s3 driver, depending on which DAC is > > >used. the s3 driver doesn't support all the DACs that were used in > > >conjuction with s3 chips of that period. specify "s3" for the driver. > > > > > > > When I ran "X -configure", i got the this. However, I don't miss the > > > > file > > > > > > apm_drv.so. > > > > failed load /usr/X11R6/lib/modules/drivers/apm_drv.so > > > > failed to load modules "apm" (loader failed, 7) > > > > > > > > When I ran "X -config /root/xorg.conf.new" anyway, such errors could be > > > > found in "/var/log/X11.0.log" file. > > > > (EE) Cannot shmat() high memory > > > > (EE) shmget error: Invalid argument > > > > > > > > I have heard that Xorg 6.7 supports Trio64, but Xorg 6.9 not any more. > > > > Is > > > > > > that true? Does 7.0 support it? Is there any way to make Trio64 work > > > > without downgrading Xorg to 6.7? > > > > > >the s3 driver hasn't changed between 6.7 and 6.9/7.0 so that driver > > >should still work. If you are still having trouble, post your log and > > >updated config. > > > > > >Alex > > > > > > > Any Ideas would be appreciated. > > > > > > > > Weimin > > > > > > > > > > > > Here is the created xorg.conf.new from X -configure. > > > > > > > > Section "ServerLayout" > > > > Identifier "X.org Configured" > > > > Screen 0 "Screen0" 0 0 > > > > Screen 1 "Screen1" RightOf "Screen0" > > > > InputDevice "Mouse0" "CorePointer" > > > > InputDevice "Keyboard0" "CoreKeyboard" > > > > EndSection > > > > > > > > Section "Files" > > > > RgbPath "/usr/X11R6/lib/X11/rgb" > > > > ModulePath "/usr/X11R6/lib/modules" > > > > FontPath "/usr/X11R6/lib/X11/fonts/misc:unscaled" > > > > FontPath "unix/:-1" > > > > EndSection > > > > > > > > Section "Module" > > > > Load "dbe" > > > > Load "dri" > > > > Load "extmod" > > > > Load "glx" > > > > Load "record" > > > > Load "xtrap" > > > > EndSection > > > > > > > > Section "InputDevice" > > > > Identifier "Keyboard0" > > > > Driver "kbd" > > > > EndSection > > > > > > > > Section "InputDevice" > > > > Identifier "Mouse0" > > > > Driver "mouse" > > > > Option "Protocol" "auto" > > > > Option "Device" "/dev/mouse" > > > > Option "ZAxisMapping" "4 5 6 7" > > > > EndSection > > > > > > > > Section "Monitor" > > > > #DisplaySize 310 230 # mm > > > > Identifier "Monitor0" > > > > VendorName "GSM" > > > > ModelName "FLATRON 774FT" > > > > ### Comment all HorizSync and VertSync values to use DDC: > > > > HorizSync 30.0 - 70.0 > > > > VertRefresh 50.0 - 160.0 > > > > Option "DPMS" > > > > EndSection > > > > > > > > Section "Monitor" > > > > Identifier "Monitor1" > > > > VendorName "Monitor Vendor" > > > > ModelName "Monitor Model" > > > > EndSection > > > > > > > > Section "Device" > > > > ### Available Driver options are:- > > > > ### Values: : integer, <f>: float, <bool>: "True"/"False", > > > > ### <string>: "String", <freq>: "<f> Hz/kHz/MHz" > > > > ### [arg]: arg optional > > > > #Option "NoAccel" # [<bool>] > > > > #Option "SWcursor" # [<bool>] > > > > #Option "ColorKey" # > > > > #Option "CacheLines" # > > > > #Option "Dac6Bit" # [<bool>] > > > > #Option "DRI" # [<bool>] > > > > #Option "NoDDC" # [<bool>] > > > > #Option "ShowCache" # [<bool>] > > > > #Option "XvMCSurfaces" # > > > > #Option "PageFlip" # [<bool>] > > > > Identifier "Card0" > > > > Driver "i810" > > > > VendorName "Intel Corporation" > > > > BoardName "82845G/GL[Brookdale-G]/GE Chipset Integrated > > > > Graphics Device" > > > > > > BusID "PCI:0:2:0" > > > > EndSection > > > > > > > > Section "Device" > > > > ### Available Driver options are:- > > > > ### Values: : integer, <f>: float, <bool>: "True"/"False", > > > > ### <string>: "String", <freq>: "<f> Hz/kHz/MHz" > > > > ### [arg]: arg optional > > > > #Option "ShadowFB" # [<bool>] > > > > #Option "DefaultRefresh" # [<bool>] > > > > #Option "ModeSetClearScreen" # [<bool>] > > > > Identifier "Card1" > > > > Driver "vesa" > > > > VendorName "Unknown Vendor" > > > > BoardName "Unknown Board" > > > > BusID "PCI:1:0:0" > > > > EndSection > > > > > > > > Section "Screen" > > > > Identifier "Screen0" > > > > Device "Card0" > > > > Monitor "Monitor0" > > > > SubSection "Display" > > > > Viewport 0 0 > > > > Depth 1 > > > > EndSubSection > > > > SubSection "Display" > > > > Viewport 0 0 > > > > Depth 4 > > > > EndSubSection > > > > SubSection "Display" > > > > Viewport 0 0 > > > > Depth 8 > > > > EndSubSection > > > > SubSection "Display" > > > > Viewport 0 0 > > > > Depth 15 > > > > EndSubSection > > > > SubSection "Display" > > > > Viewport 0 0 > > > > Depth 16 > > > > EndSubSection > > > > SubSection "Display" > > > > Viewport 0 0 > > > > Depth 24 > > > > EndSubSection > > > > EndSection > > > > > > > > Section "Screen" > > > > Identifier "Screen1" > > > > Device "Card1" > > > > Monitor "Monitor1" > > > > SubSection "Display" > > > > Viewport 0 0 > > > > Depth 1 > > > > EndSubSection > > > > SubSection "Display" > > > > Viewport 0 0 > > > > Depth 4 > > > > EndSubSection > > > > SubSection "Display" > > > > Viewport 0 0 > > > > Depth 8 > > > > EndSubSection > > > > SubSection "Display" > > > > Viewport 0 0 > > > > Depth 15 > > > > EndSubSection > > > > SubSection "Display" > > > > Viewport 0 0 > > > > Depth 16 > > > > EndSubSection > > > > SubSection "Display" > > > > Viewport 0 0 > > > > Depth 24 > > > > EndSubSection > > > > EndSection > > > > > > > > > > > > _______________________________________________ > > > > xorg mailing list > > > > xorg@lists.freedesktop.org > > > > <a target="_blank" href="http://lists.freedesktop.org/mailman/listinfo/xorg">http://lists.freedesktop.org/mailman/listinfo/xorg</a> > > > > > >_______________________________________________ > > >xorg mailing list > > >xorg@lists.freedesktop.org > > ><a target="_blank" href="http://lists.freedesktop.org/mailman/listinfo/xorg">http://lists.freedesktop.org/mailman/listinfo/xorg</a> </div></div></div></div></body></html>