S-VIDEO PORT

[job.res at tiscali.it]

Good morning Sir,
I need to activate S-Video output for whatching what I can see on PC's
regular
screen also in TV by S-VIDEO port . I need this for a company 
presentation.
Thank you very much for helping me.
Andrea Toia.


>>>>> I have a notebook Aspire 1600 with S-Video out
>>>>> this is an extract of lspci -vv command ...
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon R250
[Mobility
FireGL 9000] (rev 01) (prog-if 00 [VGA])
        Subsystem: Wistron Corp. Unknown device 2058
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr-
Stepping+ SERR- FastB2B+
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort-
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 66 (2000ns min), Cache Line Size: 16 bytes
        Interrupt: pin A routed to IRQ 11
        Region 0: Memory at f0000000 (32-bit, prefetchable)
[size=128M]
        Region 1: I/O ports at a000 [size=256]
        Region 2: Memory at ec100000 (32-bit, non-prefetchable)
[size=64K]
        [virtual] Expansion ROM at ec120000 [disabled] [size=128K]
        Capabilities: [58] AGP version 2.0
                Status: RQ=48 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64-
HTrans-
64bit- FW+ AGP3- Rate=x1,x2,x4
                Command: RQ=32 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit-
FW-
Rate=x1
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-



>>>>> OS: Fedora Core 7


>>>>>  output of command # X- version
X Window System Version 1.2.99.905 (1.3.0 RC 5)
Release Date: 05 April 2007
X Protocol Version 11, Revision 0, Release 1.2.99.905
Build Operating System: Fedora Core 7 Red Hat, Inc.
Current Operating System: Linux localhost.localdomain 2.6.20-1.3104.
fc7 #1 SMP
Sat Apr 21 22:20:43 EDT 2007 i686
Build Date: 13 April 2007
Build ID: xorg-x11-server 1.2.99.905-5.fc7
        Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
Module Loader present


>>>>> File xorg.conf (S-Video not configured)
# Xorg configuration created by system-config-display

Section "ServerLayout"
        Identifier     "single head configuration"
        Screen      0  "Screen0" 0 0
        InputDevice    "Keyboard0" "CoreKeyboard"
        InputDevice    "Synaptics" "CorePointer"
EndSection

Section "InputDevice"
        Identifier  "Keyboard0"
        Driver      "kbd"
        Option      "XkbModel" "pc105"
        Option      "XkbLayout" "it"
EndSection

Section "InputDevice"
        Identifier  "Synaptics"
        Driver      "synaptics"
        Option      "Device" "/dev/input/mice"
        Option      "Protocol" "auto-dev"
        Option      "Emulate3Buttons" "yes"
EndSection

Section "Monitor"
        Identifier   "Monitor1"
        VendorName   "Monitor Vendor"
        ModelName    "Monitor 1280x1024"
        HorizSync    31.5 - 79.0
        VertRefresh  50.0 - 90.0
        Option      "dpms"
EndSection

Section "Device"
        Identifier  "Videocard0"
        Driver      "radeon"
EndSection

Section "Screen"
        Identifier "Screen0"
        Device     "Videocard0"
        DefaultDepth     24
        SubSection "Display"
                Viewport   0 0
                Depth     24
        EndSubSection
EndSection




Naviga e telefona senza limiti con Tiscali     
Scopri le promozioni Tiscali Adsl: navighi e telefoni senza canone Telecom

http://abbonati.tiscali.it/adsl/