
X.Org X Server 1.4.99.901 (1.5.0 RC 1)
Release Date: 5 September 2007
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.18-53.1.14.el5xen i686 
Current Operating System: Linux client-172.31.100.106 2.6.25-14.fc9.i586 #1 SMP Thu May 1 05:49:25 EDT 2008 i586
Build Date: 24 April 2008  03:49:00PM
Build ID: xorg-x11-server 1.4.99.901-26.20080415.fc9 
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.7.log", Time: Thu Dec  2 10:37:01 1999
(EE) Unable to locate/open config file
(II) Loader magic: 0x81f7460
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.3
	X.Org Video Driver: 4.0
	X.Org XInput driver : 2.0
	X.Org Server Extension : 1.0
	X.Org Font Renderer : 0.5
(II) Loader running on linux
(++) using VT number 7

(--) PCI:*(0@0:1:1) Advanced Micro Devices [AMD] Geode LX Video rev 0, Mem @ 0xfd000000/0, 0xfe000000/0, 0xfe004000/0, 0xfe008000/0, 0xfe00c000/0
(==) Matched amd for the autoconfigured driver
New driver is "amd"
(==) Using default built-in configuration (30 lines)
(==) --- Start of built-in configuration ---
	Section "Device"
		Identifier	"Builtin Default amd Device 0"
		Driver	"amd"
	EndSection
	Section "Screen"
		Identifier	"Builtin Default amd Screen 0"
		Device	"Builtin Default amd Device 0"
	EndSection
	Section "Device"
		Identifier	"Builtin Default fbdev Device 0"
		Driver	"fbdev"
	EndSection
	Section "Screen"
		Identifier	"Builtin Default fbdev Screen 0"
		Device	"Builtin Default fbdev Device 0"
	EndSection
	Section "Device"
		Identifier	"Builtin Default vesa Device 0"
		Driver	"vesa"
	EndSection
	Section "Screen"
		Identifier	"Builtin Default vesa Screen 0"
		Device	"Builtin Default vesa Device 0"
	EndSection
	Section "ServerLayout"
		Identifier	"Builtin Default Layout"
		Screen	"Builtin Default amd Screen 0"
		Screen	"Builtin Default fbdev Screen 0"
		Screen	"Builtin Default vesa Screen 0"
	EndSection
(==) --- End of built-in configuration ---
(==) ServerLayout "Builtin Default Layout"
(**) |-->Screen "Builtin Default amd Screen 0" (0)
(**) |   |-->Monitor "<default monitor>"
(**) |   |-->Device "Builtin Default amd Device 0"
(==) No monitor specified for screen "Builtin Default amd Screen 0".
	Using a default monitor configuration.
(**) |-->Screen "Builtin Default fbdev Screen 0" (1)
(**) |   |-->Monitor "<default monitor>"
(**) |   |-->Device "Builtin Default fbdev Device 0"
(==) No monitor specified for screen "Builtin Default fbdev Screen 0".
	Using a default monitor configuration.
(**) |-->Screen "Builtin Default vesa Screen 0" (2)
(**) |   |-->Monitor "<default monitor>"
(**) |   |-->Device "Builtin Default vesa Device 0"
(==) No monitor specified for screen "Builtin Default vesa Screen 0".
	Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(==) No FontPath specified.  Using compiled-in default.
(==) FontPath set to:
	catalogue:/etc/X11/fontpath.d,
	built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(==) |-->Input Device "<default pointer>"
(==) |-->Input Device "<default keyboard>"
(==) The core pointer device wasn't specified explicitly in the layout.
	Using the default mouse configuration.
(==) The core keyboard device wasn't specified explicitly in the layout.
	Using the default keyboard configuration.
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) System resource ranges:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[5] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
(II) LoadModule: "extmod"

(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 1.4.99.901, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 1.0
(II) Loading extension SELinux
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"

(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 1.4.99.901, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 1.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"

(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
	compiled for 1.4.99.901, module version = 1.0.0
	ABI class: X.Org Server Extension, version 1.0
(==) AIGLX enabled
(==) Exporting typical set of GLX visuals
(II) Loading extension GLX
(II) LoadModule: "freetype"

(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
	compiled for 1.4.99.901, module version = 2.1.0
	Module class: X.Org Font Renderer
	ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "dri"

(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
	compiled for 1.4.99.901, module version = 1.0.0
	ABI class: X.Org Server Extension, version 1.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"

(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
	compiled for 1.4.99.901, module version = 1.0.0
	ABI class: X.Org Server Extension, version 1.0
(II) Loading extension DRI2
(II) LoadModule: "amd"

(II) Loading /usr/lib/xorg/modules/drivers//amd_drv.so
(II) Module amd: vendor="X.Org Foundation"
	compiled for 1.4.99.901, module version = 2.9.0
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 4.0
(II) LoadModule: "fbdev"

(II) Loading /usr/lib/xorg/modules/drivers//fbdev_drv.so
(II) Module fbdev: vendor="X.Org Foundation"
	compiled for 1.4.99.2, module version = 0.3.1
	ABI class: X.Org Video Driver, version 4.0
(II) LoadModule: "vesa"

(II) Loading /usr/lib/xorg/modules/drivers//vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
	compiled for 1.4.99.901, module version = 1.3.0
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 4.0
(II) LoadModule: "mouse"

(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
	compiled for 1.4.99.901, module version = 1.3.0
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "kbd"

(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
	compiled for 1.4.99.901, module version = 1.3.0
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 2.0
(II) GEODE: Driver for AMD Geode Chipsets: Geode LX, Geode GX
(II) FBDEV: driver for framebuffer: fbdev
(II) VESA: driver for VESA chipsets: vesa
(II) Primary Device is: PCI 00@00:01:1
AmdPciProbe: Probing for supported devices!
(II) resource ranges after xf86ClaimFixedResources() call:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[5] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
(II) GEODE(0): AmdPciProbe: CPUDetected 32!
(WW) Falling back to old probe method for fbdev
(II) Loading sub module "fbdevhw"
(II) LoadModule: "fbdevhw"

(II) Loading /usr/lib/xorg/modules/linux//libfbdevhw.so
(II) Module fbdevhw: vendor="X.Org Foundation"
	compiled for 1.4.99.901, module version = 0.0.2
	ABI class: X.Org Video Driver, version 4.0
(EE) open /dev/fb0: No such file or directory
(WW) Falling back to old probe method for vesa
(II) resource ranges after probing:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B]
	[5] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
	[6] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B]
	[7] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[8] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
	[9] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B]
	[10] 0	0	0x000003c0 - 0x000003df (0x20) IS[B]
(WW) System lacks support for changing MTRRs
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"

(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
	compiled for 1.4.99.901, module version = 0.1.0
	ABI class: X.Org Video Driver, version 4.0
Unable to open /dev/cpu/0/msr: 2
(II) GEODE(0): Creating default Display subsection in Screen section
	"Builtin Default amd Screen 0" for depth/fbbpp 16/16
(==) GEODE(0): Depth 16, (==) framebuffer bpp 16
(==) GEODE(0): RGB weight 565
(==) GEODE(0): Default visual is TrueColor
(==) GEODE(0): Using gamma correction (1.0, 1.0, 1.0)
(==) GEODE(0): No DCON is present
(II) GEODE(0): LX output options:
(II) GEODE(0):  CRT: YES
(II) GEODE(0):  PANEL: NO
(II) GEODE(0):  DCON: NO
(II) GEODE(0):  VGA: YES
(II) Loading sub module "int10"
(II) LoadModule: "int10"

(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
	compiled for 1.4.99.901, module version = 1.0.0
	ABI class: X.Org Video Driver, version 4.0
(II) GEODE(0): Primary V_BIOS segment is: 0xc000
(EE) GEODE(0): GPIO pins are in serial mode.  Assuming no DDC
(II) GEODE(0): <default monitor>: Using default hsync range of 31.50-37.90 kHz
(II) GEODE(0): <default monitor>: Using default vrefresh range of 50.00-70.00 Hz
(WW) GEODE(0): Unable to estimate virtual size
(II) GEODE(0): Clock range:  25.18 to 229.50 MHz
(II) GEODE(0): Not using default mode "640x350" (unknown reason)
(II) GEODE(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "640x400" (unknown reason)
(II) GEODE(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "720x400" (unknown reason)
(II) GEODE(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "640x480" (unknown reason)
(II) GEODE(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "640x480" (vrefresh out of range)
(II) GEODE(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "640x480" (hsync out of range)
(II) GEODE(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "800x600" (hsync out of range)
(II) GEODE(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "800x600" (hsync out of range)
(II) GEODE(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "800x600" (hsync out of range)
(II) GEODE(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1024x768" (unknown reason)
(II) GEODE(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1024x768" (hsync out of range)
(II) GEODE(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1024x768" (hsync out of range)
(II) GEODE(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1024x768" (hsync out of range)
(II) GEODE(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1024x768" (hsync out of range)
(II) GEODE(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1152x864" (hsync out of range)
(II) GEODE(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1280x960" (unknown reason)
(II) GEODE(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1280x960" (unknown reason)
(II) GEODE(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1280x1024" (hsync out of range)
(II) GEODE(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1280x1024" (hsync out of range)
(II) GEODE(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1280x1024" (hsync out of range)
(II) GEODE(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1600x1200" (hsync out of range)
(II) GEODE(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1600x1200" (unknown reason)
(II) GEODE(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1600x1200" (hsync out of range)
(II) GEODE(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1600x1200" (hsync out of range)
(II) GEODE(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1600x1200" (hsync out of range)
(II) GEODE(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1792x1344" (unknown reason)
(II) GEODE(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1792x1344" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1856x1392" (unknown reason)
(II) GEODE(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1856x1392" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "832x624" (unknown reason)
(II) GEODE(0): Not using default mode "416x312" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1152x864" (hsync out of range)
(II) GEODE(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1152x864" (hsync out of range)
(II) GEODE(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1152x864" (hsync out of range)
(II) GEODE(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1152x864" (hsync out of range)
(II) GEODE(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1152x864" (hsync out of range)
(II) GEODE(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1152x864" (hsync out of range)
(II) GEODE(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1360x768" (unknown reason)
(II) GEODE(0): Not using default mode "680x384" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1360x768" (unknown reason)
(II) GEODE(0): Not using default mode "680x384" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1400x1050" (unknown reason)
(II) GEODE(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1400x1050" (unknown reason)
(II) GEODE(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1400x1050" (unknown reason)
(II) GEODE(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1400x1050" (unknown reason)
(II) GEODE(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1440x900" (unknown reason)
(II) GEODE(0): Not using default mode "720x450" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1600x1024" (unknown reason)
(II) GEODE(0): Not using default mode "800x512" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1680x1050" (unknown reason)
(II) GEODE(0): Not using default mode "840x525" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1680x1050" (unknown reason)
(II) GEODE(0): Not using default mode "840x525" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1680x1050" (unknown reason)
(II) GEODE(0): Not using default mode "840x525" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1680x1050" (unknown reason)
(II) GEODE(0): Not using default mode "840x525" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1680x1050" (unknown reason)
(II) GEODE(0): Not using default mode "840x525" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1920x1080" (unknown reason)
(II) GEODE(0): Not using default mode "960x540" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1920x1200" (unknown reason)
(II) GEODE(0): Not using default mode "960x600" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(--) GEODE(0): Virtual size is 800x600 (pitch 1024)
(**) GEODE(0): *Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) GEODE(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(**) GEODE(0): *Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) GEODE(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(**) GEODE(0): *Default mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz
(II) GEODE(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(==) GEODE(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"

(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
	compiled for 1.4.99.901, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "exa"
(II) LoadModule: "exa"

(II) Loading /usr/lib/xorg/modules//libexa.so
(II) Module exa: vendor="X.Org Foundation"
	compiled for 1.4.99.901, module version = 2.4.0
	ABI class: X.Org Video Driver, version 4.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) UnloadModule: "fbdev"
(II) Unloading /usr/lib/xorg/modules/drivers//fbdev_drv.so
(II) UnloadModule: "fbdevhw"
(II) Unloading /usr/lib/xorg/modules/linux//libfbdevhw.so
(II) UnloadModule: "vesa"
(II) Unloading /usr/lib/xorg/modules/drivers//vesa_drv.so
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B]
	[5] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
	[6] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B]
	[7] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[8] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
	[9] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B]
	[10] 0	0	0x000003c0 - 0x000003df (0x20) IS[B]
(II) GEODE(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) GEODE(0): Geode LX video memory c00000 bytes at 0xb70b4000
(II) EXA(0): Offscreen pixmap area of 9715968 bytes
(II) EXA(0): Driver registered support for the following operations:
(II)         Solid
(II)         Copy
(II)         Composite (RENDER acceleration)
(==) GEODE(0): Backing store disabled
(II) GEODE(0): DPMS enabled
(II) Loading sub module "shadow"
(II) LoadModule: "shadow"

(II) Loading /usr/lib/xorg/modules//libshadow.so
(II) Module shadow: vendor="X.Org Foundation"
	compiled for 1.4.99.901, module version = 1.1.0
	ABI class: X.Org ANSI C Emulation, version 0.3
(--) RandR disabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(II) AIGLX: Screen 0 is not DRI2 capable
(II) AIGLX: Screen 0 is not DRI capable
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"

(II) Loading /usr/lib/xorg/modules/extensions//libGLcore.so
(II) Module GLcore: vendor="X.Org Foundation"
	compiled for 1.4.99.901, module version = 1.0.0
	ABI class: X.Org Server Extension, version 1.0
(II) GLX: Initialized MESA-PROXY GL provider for screen 0
(WW) <default pointer>: No Device specified, looking for one...
(II) <default pointer>: Setting Device option to "/dev/input/mice"
(--) <default pointer>: Device: "/dev/input/mice"
(==) <default pointer>: Protocol: "Auto"
(**) Option "CorePointer"
(**) <default pointer>: always reports core events
(==) <default pointer>: Emulate3Buttons, Emulate3Timeout: 50
(**) <default pointer>: ZAxisMapping: buttons 4 and 5
(**) <default pointer>: Buttons: 9
(**) <default pointer>: Sensitivity: 1
(**) Option "CoreKeyboard"
(**) <default keyboard>: always reports core events
(**) Option "Protocol" "standard"
(**) <default keyboard>: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) <default keyboard>: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) <default keyboard>: XkbModel: "pc105"
(**) Option "XkbLayout" "us"
(**) <default keyboard>: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) <default keyboard>: CustomKeycodes disabled
(II) evaluating device (<default keyboard>)
(II) XINPUT: Adding extended input device "<default keyboard>" (type: KEYBOARD)
(II) evaluating device (<default pointer>)
(II) XINPUT: Adding extended input device "<default pointer>" (type: MOUSE)
(II) <default pointer>: Setting mouse protocol to "ExplorerPS/2"
(II) <default pointer>: ps2EnableDataReporting: succeeded
