[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-5-amd64 (Debian 2.6.32-34squeeze1) (dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Wed May 18 23:13:22 UTC 2011 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64 root=UUID=9e37a2f7-a8d0-40d0-b57c-140bbc10a449 ro quiet [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 0000000000096c00 (usable) [ 0.000000] BIOS-e820: 0000000000096c00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4c00 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf780000 (usable) [ 0.000000] BIOS-e820: 00000000bf780000 - 00000000bf798000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bf798000 - 00000000bf7dc000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bf7dc000 - 00000000c0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 00000001c0000000 (usable) [ 0.000000] DMI 2.5 present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x1c0000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-E3FFF write-protect [ 0.000000] E4000-EBFFF write-through [ 0.000000] EC000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 1C0000000 mask FC0000000 uncachable [ 0.000000] 1 base 000000000 mask E00000000 write-back [ 0.000000] 2 base 0C0000000 mask FC0000000 uncachable [ 0.000000] 3 base 0BF800000 mask FFF800000 uncachable [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000bf800000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xbf780 max_arch_pfn = 0x400000000 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000bf780000 [ 0.000000] 0000000000 - 00bf600000 page 2M [ 0.000000] 00bf600000 - 00bf780000 page 4k [ 0.000000] kernel direct mapping tables up to bf780000 @ 10000-15000 [ 0.000000] init_memory_mapping: 0000000100000000-00000001c0000000 [ 0.000000] 0100000000 - 01c0000000 page 2M [ 0.000000] kernel direct mapping tables up to 1c0000000 @ 13000-1b000 [ 0.000000] RAMDISK: 37555000 - 37feff5f [ 0.000000] ACPI: RSDP 00000000000fb1a0 00024 (v02 ACPIAM) [ 0.000000] ACPI: XSDT 00000000bf780100 00064 (v01 022410 XSDT1405 20100224 MSFT 00000097) [ 0.000000] ACPI: FACP 00000000bf780290 000F4 (v03 022410 FACP1405 20100224 MSFT 00000097) [ 0.000000] ACPI: DSDT 00000000bf7804b0 0C359 (v01 A1279 A1279001 00000001 INTL 20060113) [ 0.000000] ACPI: FACS 00000000bf798000 00040 [ 0.000000] ACPI: APIC 00000000bf780390 000D8 (v01 022410 APIC1405 20100224 MSFT 00000097) [ 0.000000] ACPI: MCFG 00000000bf780470 0003C (v01 022410 OEMMCFG 20100224 MSFT 00000097) [ 0.000000] ACPI: OEMB 00000000bf798040 00072 (v01 022410 OEMB1405 20100224 MSFT 00000097) [ 0.000000] ACPI: HPET 00000000bf78f4b0 00038 (v01 022410 OEMHPET 20100224 MSFT 00000097) [ 0.000000] ACPI: DMAR 00000000bf7980c0 00138 (v01 AMI OEMDMAR 00000001 MSFT 00000097) [ 0.000000] ACPI: OSFR 00000000bf78f4f0 000B0 (v01 022410 OEMOSFR 20100224 MSFT 00000097) [ 0.000000] ACPI: SSDT 00000000bf79a440 00363 (v01 DpgPmm CpuPm 00000012 INTL 20060113) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-00000001c0000000 [ 0.000000] Bootmem setup node 0 0000000000000000-00000001c0000000 [ 0.000000] NODE_DATA [0000000000016000 - 000000000001dfff] [ 0.000000] bootmap [000000000001e000 - 0000000000055fff] pages 38 [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 01c0000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 000168c454] TEXT DATA BSS ==> [0001000000 - 000168c454] [ 0.000000] #3 [0037555000 - 0037feff5f] RAMDISK ==> [0037555000 - 0037feff5f] [ 0.000000] #4 [0000096c00 - 0000100000] BIOS reserved ==> [0000096c00 - 0000100000] [ 0.000000] #5 [000168d000 - 000168d28c] BRK ==> [000168d000 - 000168d28c] [ 0.000000] #6 [0000010000 - 0000013000] PGTABLE ==> [0000010000 - 0000013000] [ 0.000000] #7 [0000013000 - 0000016000] PGTABLE ==> [0000013000 - 0000016000] [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780 [ 0.000000] [ffffea0000000000-ffffea00061fffff] PMD -> [ffff880001800000-ffff880006bfffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x001c0000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x00000096 [ 0.000000] 0: 0x00000100 -> 0x000bf780 [ 0.000000] 0: 0x00100000 -> 0x001c0000 [ 0.000000] On node 0 totalpages: 1570566 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 114 pages reserved [ 0.000000] DMA zone: 3804 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 765880 pages, LIFO batch:31 [ 0.000000] Normal zone: 10752 pages used for memmap [ 0.000000] Normal zone: 775680 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled) [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x09] address[0xfec8a000] gsi_base[24]) [ 0.000000] IOAPIC[1]: apic_id 9, version 32, address 0xfec8a000, GSI 24-47 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.000000] SMP: Allowing 16 CPUs, 8 hotplug CPUs [ 0.000000] nr_irqs_gsi: 48 [ 0.000000] PM: Registered nosave memory: 0000000000096000 - 0000000000097000 [ 0.000000] PM: Registered nosave memory: 0000000000097000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e5000 [ 0.000000] PM: Registered nosave memory: 00000000000e5000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000bf780000 - 00000000bf798000 [ 0.000000] PM: Registered nosave memory: 00000000bf798000 - 00000000bf7dc000 [ 0.000000] PM: Registered nosave memory: 00000000bf7dc000 - 00000000c0000000 [ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffe00000 [ 0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:3ee00000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:16 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880006e00000 s90328 r8192 d24360 u131072 [ 0.000000] pcpu-alloc: s90328 r8192 d24360 u131072 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1545364 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64 root=UUID=9e37a2f7-a8d0-40d0-b57c-140bbc10a449 ro quiet [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.000000] Placing 64MB software IO TLB between ffff880006ffe000 - ffff88000affe000 [ 0.000000] software IO TLB at phys 0x6ffe000 - 0xaffe000 [ 0.000000] Memory: 6110376k/7340032k available (3081k kernel code, 1057768k absent, 171888k reserved, 1898k data, 592k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:944 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.004000] Detected 3073.517 MHz processor. [ 0.000004] Calibrating delay loop (skipped), value calculated using timer frequency.. 6147.03 BogoMIPS (lpj=12294068) [ 0.000017] Security Framework initialized [ 0.000021] SELinux: Disabled at boot. [ 0.000455] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.001882] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.002464] Mount-cache hash table entries: 256 [ 0.002565] Initializing cgroup subsys ns [ 0.002567] Initializing cgroup subsys cpuacct [ 0.002571] Initializing cgroup subsys devices [ 0.002573] Initializing cgroup subsys freezer [ 0.002574] Initializing cgroup subsys net_cls [ 0.002590] CPU: Physical Processor ID: 0 [ 0.002591] CPU: Processor Core ID: 0 [ 0.002593] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.002595] CPU: L2 cache: 256K [ 0.002596] CPU: L3 cache: 8192K [ 0.002598] CPU 0/0x0 -> Node 0 [ 0.002600] mce: CPU supports 9 MCE banks [ 0.002613] CPU0: Thermal monitoring enabled (TM1) [ 0.002616] CPU 0 MCA banks CMCI:2 CMCI:3 CMCI:5 CMCI:6 SHD:8 [ 0.002623] using mwait in idle threads. [ 0.002625] Performance Events: Nehalem/Corei7 events, Intel PMU driver. [ 0.002629] ... version: 3 [ 0.002630] ... bit width: 48 [ 0.002630] ... generic registers: 4 [ 0.002632] ... value mask: 0000ffffffffffff [ 0.002633] ... max period: 000000007fffffff [ 0.002634] ... fixed-purpose events: 3 [ 0.002635] ... event mask: 000000070000000f [ 0.003347] ACPI: Core revision 20090903 [ 0.038088] DMAR: Host address width 39 [ 0.038091] DMAR: DRHD base: 0x000000fbfff000 flags: 0x0 [ 0.038098] IOMMU fbfff000: ver 1:0 cap c9008010e60262 ecap f0207a [ 0.038100] DMAR: DRHD base: 0x000000fbffe000 flags: 0x1 [ 0.038106] IOMMU fbffe000: ver 1:0 cap c90780106f0462 ecap f020fe [ 0.038108] DMAR: RMRR base: 0x000000000ec000 end: 0x000000000effff [ 0.038110] DMAR: RMRR base: 0x000000bf7dc000 end: 0x000000bf7dbfff [ 0.038112] DMAR: ATSR flags: 0x0 [ 0.038118] IOAPIC id 8 under DRHD base 0xfbffe000 [ 0.038120] IOAPIC id 9 under DRHD base 0xfbffe000 [ 0.038360] Enabled Interrupt-remapping [ 0.038365] Setting APIC routing to physical flat [ 0.038647] alloc irq_desc for 48 on node 0 [ 0.038648] alloc kstat_irqs on node 0 [ 0.038662] alloc irq_desc for 49 on node 0 [ 0.038663] alloc kstat_irqs on node 0 [ 0.038674] alloc irq_2_iommu on node 0 [ 0.038679] alloc irq_2_iommu on node 0 [ 0.038684] alloc irq_2_iommu on node 0 [ 0.038689] alloc irq_2_iommu on node 0 [ 0.038694] alloc irq_2_iommu on node 0 [ 0.038699] alloc irq_2_iommu on node 0 [ 0.038704] alloc irq_2_iommu on node 0 [ 0.038708] alloc irq_2_iommu on node 0 [ 0.038713] alloc irq_2_iommu on node 0 [ 0.038718] alloc irq_2_iommu on node 0 [ 0.038723] alloc irq_2_iommu on node 0 [ 0.038727] alloc irq_2_iommu on node 0 [ 0.038732] alloc irq_2_iommu on node 0 [ 0.038737] alloc irq_2_iommu on node 0 [ 0.038742] alloc irq_2_iommu on node 0 [ 0.038882] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.078546] CPU0: Intel(R) Core(TM) i7 CPU 950 @ 3.07GHz stepping 05 [ 0.185040] Booting processor 1 APIC 0x2 ip 0x6000 [ 0.218543] Initializing CPU#1 [ 0.296889] CPU: Physical Processor ID: 0 [ 0.296890] CPU: Processor Core ID: 1 [ 0.296892] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.296893] CPU: L2 cache: 256K [ 0.296894] CPU: L3 cache: 8192K [ 0.296896] CPU 1/0x2 -> Node 0 [ 0.296909] CPU1: Thermal monitoring enabled (TM1) [ 0.296912] CPU 1 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8 [ 0.296971] CPU1: Intel(R) Core(TM) i7 CPU 950 @ 3.07GHz stepping 05 [ 0.296977] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.317042] Booting processor 2 APIC 0x4 ip 0x6000 [ 0.327323] Initializing CPU#2 [ 0.404831] CPU: Physical Processor ID: 0 [ 0.404832] CPU: Processor Core ID: 2 [ 0.404834] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.404836] CPU: L2 cache: 256K [ 0.404836] CPU: L3 cache: 8192K [ 0.404838] CPU 2/0x4 -> Node 0 [ 0.404851] CPU2: Thermal monitoring enabled (TM1) [ 0.404854] CPU 2 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8 [ 0.404926] CPU2: Intel(R) Core(TM) i7 CPU 950 @ 3.07GHz stepping 05 [ 0.404932] checking TSC synchronization [CPU#0 -> CPU#2]: passed. [ 0.424999] Booting processor 3 APIC 0x6 ip 0x6000 [ 0.435281] Initializing CPU#3 [ 0.512776] CPU: Physical Processor ID: 0 [ 0.512778] CPU: Processor Core ID: 3 [ 0.512780] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.512781] CPU: L2 cache: 256K [ 0.512782] CPU: L3 cache: 8192K [ 0.512784] CPU 3/0x6 -> Node 0 [ 0.512797] CPU3: Thermal monitoring enabled (TM1) [ 0.512800] CPU 3 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8 [ 0.512834] CPU3: Intel(R) Core(TM) i7 CPU 950 @ 3.07GHz stepping 05 [ 0.512840] checking TSC synchronization [CPU#0 -> CPU#3]: passed. [ 0.532913] Booting processor 4 APIC 0x1 ip 0x6000 [ 0.543094] Initializing CPU#4 [ 0.620717] CPU: Physical Processor ID: 0 [ 0.620718] CPU: Processor Core ID: 0 [ 0.620720] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.620721] CPU: L2 cache: 256K [ 0.620722] CPU: L3 cache: 8192K [ 0.620724] CPU 4/0x1 -> Node 0 [ 0.620735] CPU4: Thermal monitoring enabled (TM1) [ 0.620737] CPU 4 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8 [ 0.620801] CPU4: Intel(R) Core(TM) i7 CPU 950 @ 3.07GHz stepping 05 [ 0.620807] checking TSC synchronization [CPU#0 -> CPU#4]: passed. [ 0.640865] Booting processor 5 APIC 0x3 ip 0x6000 [ 0.651143] Initializing CPU#5 [ 0.728661] CPU: Physical Processor ID: 0 [ 0.728662] CPU: Processor Core ID: 1 [ 0.728664] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.728665] CPU: L2 cache: 256K [ 0.728666] CPU: L3 cache: 8192K [ 0.728668] CPU 5/0x3 -> Node 0 [ 0.728677] CPU5: Thermal monitoring enabled (TM1) [ 0.728680] CPU 5 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8 [ 0.728750] CPU5: Intel(R) Core(TM) i7 CPU 950 @ 3.07GHz stepping 05 [ 0.728756] checking TSC synchronization [CPU#0 -> CPU#5]: passed. [ 0.748817] Booting processor 6 APIC 0x5 ip 0x6000 [ 0.758993] Initializing CPU#6 [ 0.836602] CPU: Physical Processor ID: 0 [ 0.836602] CPU: Processor Core ID: 2 [ 0.836604] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.836605] CPU: L2 cache: 256K [ 0.836606] CPU: L3 cache: 8192K [ 0.836607] CPU 6/0x5 -> Node 0 [ 0.836616] CPU6: Thermal monitoring enabled (TM1) [ 0.836619] CPU 6 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8 [ 0.836703] CPU6: Intel(R) Core(TM) i7 CPU 950 @ 3.07GHz stepping 05 [ 0.836709] checking TSC synchronization [CPU#0 -> CPU#6]: passed. [ 0.856765] Booting processor 7 APIC 0x7 ip 0x6000 [ 0.867038] Initializing CPU#7 [ 0.944544] CPU: Physical Processor ID: 0 [ 0.944545] CPU: Processor Core ID: 3 [ 0.944547] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.944548] CPU: L2 cache: 256K [ 0.944548] CPU: L3 cache: 8192K [ 0.944550] CPU 7/0x7 -> Node 0 [ 0.944559] CPU7: Thermal monitoring enabled (TM1) [ 0.944561] CPU 7 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8 [ 0.944651] CPU7: Intel(R) Core(TM) i7 CPU 950 @ 3.07GHz stepping 05 [ 0.944657] checking TSC synchronization [CPU#0 -> CPU#7]: passed. [ 0.964668] Brought up 8 CPUs [ 0.964670] Total of 8 processors activated (49175.56 BogoMIPS). [ 0.968209] CPU0 attaching sched-domain: [ 0.968211] domain 0: span 0,4 level SIBLING [ 0.968213] groups: 0 (cpu_power = 589) 4 (cpu_power = 589) [ 0.968216] domain 1: span 0-7 level MC [ 0.968218] groups: 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) [ 0.968225] CPU1 attaching sched-domain: [ 0.968226] domain 0: span 1,5 level SIBLING [ 0.968227] groups: 1 (cpu_power = 589) 5 (cpu_power = 589) [ 0.968230] domain 1: span 0-7 level MC [ 0.968231] groups: 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) [ 0.968237] CPU2 attaching sched-domain: [ 0.968238] domain 0: span 2,6 level SIBLING [ 0.968239] groups: 2 (cpu_power = 589) 6 (cpu_power = 589) [ 0.968242] domain 1: span 0-7 level MC [ 0.968243] groups: 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) [ 0.968249] CPU3 attaching sched-domain: [ 0.968250] domain 0: span 3,7 level SIBLING [ 0.968251] groups: 3 (cpu_power = 589) 7 (cpu_power = 589) [ 0.968254] domain 1: span 0-7 level MC [ 0.968255] groups: 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) [ 0.968261] CPU4 attaching sched-domain: [ 0.968262] domain 0: span 0,4 level SIBLING [ 0.968263] groups: 4 (cpu_power = 589) 0 (cpu_power = 589) [ 0.968266] domain 1: span 0-7 level MC [ 0.968267] groups: 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) [ 0.968273] CPU5 attaching sched-domain: [ 0.968274] domain 0: span 1,5 level SIBLING [ 0.968275] groups: 5 (cpu_power = 589) 1 (cpu_power = 589) [ 0.968278] domain 1: span 0-7 level MC [ 0.968279] groups: 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) [ 0.968285] CPU6 attaching sched-domain: [ 0.968286] domain 0: span 2,6 level SIBLING [ 0.968287] groups: 6 (cpu_power = 589) 2 (cpu_power = 589) [ 0.968290] domain 1: span 0-7 level MC [ 0.968291] groups: 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) [ 0.968297] CPU7 attaching sched-domain: [ 0.968298] domain 0: span 3,7 level SIBLING [ 0.968299] groups: 7 (cpu_power = 589) 3 (cpu_power = 589) [ 0.968302] domain 1: span 0-7 level MC [ 0.968303] groups: 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) [ 0.968609] devtmpfs: initialized [ 0.971540] regulator: core version 0.5 [ 0.971577] NET: Registered protocol family 16 [ 0.971635] ACPI: bus type pci registered [ 0.971686] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.971688] PCI: Not using MMCONFIG. [ 0.971689] PCI: Using configuration type 1 for base access [ 0.972051] bio: create slab at 0 [ 0.972672] ACPI: EC: Look up EC in DSDT [ 0.974527] ACPI: Executed 1 blocks of module-level executable AML code [ 1.004166] ACPI: Interpreter enabled [ 1.004169] ACPI: (supports S0 S1 S3 S4 S5) [ 1.004187] ACPI: Using IOAPIC for interrupt routing [ 1.004232] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 1.006147] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources [ 1.010462] PCI: Using MMCONFIG at e0000000 - efffffff [ 1.017704] ACPI: No dock devices found. [ 1.017816] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 1.017879] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 1.017882] pci 0000:00:00.0: PME# disabled [ 1.017936] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 1.017938] pci 0000:00:01.0: PME# disabled [ 1.017993] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 1.017995] pci 0000:00:03.0: PME# disabled [ 1.018051] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold [ 1.018053] pci 0000:00:07.0: PME# disabled [ 1.018252] pci 0000:00:1a.0: reg 20 io port: [0xa800-0xa81f] [ 1.018311] pci 0000:00:1a.1: reg 20 io port: [0xa880-0xa89f] [ 1.018369] pci 0000:00:1a.2: reg 20 io port: [0xac00-0xac1f] [ 1.018431] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfbaff000-0xfbaff3ff] [ 1.018478] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 1.018481] pci 0000:00:1a.7: PME# disabled [ 1.018515] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfbaf8000-0xfbafbfff] [ 1.018550] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 1.018553] pci 0000:00:1b.0: PME# disabled [ 1.018605] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 1.018608] pci 0000:00:1c.0: PME# disabled [ 1.018663] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 1.018665] pci 0000:00:1c.2: PME# disabled [ 1.018719] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 1.018722] pci 0000:00:1c.3: PME# disabled [ 1.018776] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 1.018779] pci 0000:00:1c.4: PME# disabled [ 1.018825] pci 0000:00:1d.0: reg 20 io port: [0xa080-0xa09f] [ 1.018884] pci 0000:00:1d.1: reg 20 io port: [0xa400-0xa41f] [ 1.018943] pci 0000:00:1d.2: reg 20 io port: [0xa480-0xa49f] [ 1.019005] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfbafe000-0xfbafe3ff] [ 1.019052] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 1.019055] pci 0000:00:1d.7: PME# disabled [ 1.019164] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003) [ 1.019168] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 4700 (mask 001f) [ 1.019222] pci 0000:00:1f.2: reg 10 io port: [0x9c00-0x9c07] [ 1.019226] pci 0000:00:1f.2: reg 14 io port: [0x9880-0x9883] [ 1.019231] pci 0000:00:1f.2: reg 18 io port: [0x9800-0x9807] [ 1.019235] pci 0000:00:1f.2: reg 1c io port: [0x9480-0x9483] [ 1.019240] pci 0000:00:1f.2: reg 20 io port: [0x9400-0x941f] [ 1.019244] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfbafc000-0xfbafc7ff] [ 1.019270] pci 0000:00:1f.2: PME# supported from D3hot [ 1.019273] pci 0000:00:1f.2: PME# disabled [ 1.019297] pci 0000:00:1f.3: reg 10 64bit mmio: [0xfbafd000-0xfbafd0ff] [ 1.019308] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f] [ 1.019367] pci 0000:02:00.0: reg 10 64bit mmio pref: [0xd0000000-0xdfffffff] [ 1.019374] pci 0000:02:00.0: reg 18 64bit mmio: [0xfbbc0000-0xfbbdffff] [ 1.019378] pci 0000:02:00.0: reg 20 io port: [0xb000-0xb0ff] [ 1.019385] pci 0000:02:00.0: reg 30 32bit mmio pref: [0xfbba0000-0xfbbbffff] [ 1.019400] pci 0000:02:00.0: supports D1 D2 [ 1.019428] pci 0000:02:00.1: reg 10 64bit mmio: [0xfbbfc000-0xfbbfffff] [ 1.019456] pci 0000:02:00.1: supports D1 D2 [ 1.024671] pci 0000:00:03.0: bridge io port: [0xb000-0xbfff] [ 1.024675] pci 0000:00:03.0: bridge 32bit mmio: [0xfbb00000-0xfbbfffff] [ 1.024684] pci 0000:00:03.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff] [ 1.024741] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xfaf00000-0xfaffffff] [ 1.024781] pci 0000:06:00.0: reg 10 io port: [0xe800-0xe8ff] [ 1.024799] pci 0000:06:00.0: reg 18 64bit mmio: [0xfbeff000-0xfbefffff] [ 1.024811] pci 0000:06:00.0: reg 20 64bit mmio pref: [0xfaef0000-0xfaefffff] [ 1.024818] pci 0000:06:00.0: reg 30 32bit mmio pref: [0xfbec0000-0xfbedffff] [ 1.024853] pci 0000:06:00.0: supports D1 D2 [ 1.024855] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.024858] pci 0000:06:00.0: PME# disabled [ 1.032696] pci 0000:00:1c.2: bridge io port: [0xe000-0xefff] [ 1.032700] pci 0000:00:1c.2: bridge 32bit mmio: [0xfbe00000-0xfbefffff] [ 1.032707] pci 0000:00:1c.2: bridge 64bit mmio pref: [0xfae00000-0xfaefffff] [ 1.032758] pci 0000:05:00.0: reg 10 64bit mmio: [0xfbdff000-0xfbdff7ff] [ 1.032765] pci 0000:05:00.0: reg 18 io port: [0xd800-0xd8ff] [ 1.032817] pci 0000:05:00.0: supports D2 [ 1.032818] pci 0000:05:00.0: PME# supported from D2 D3hot D3cold [ 1.032822] pci 0000:05:00.0: PME# disabled [ 1.040695] pci 0000:00:1c.3: bridge io port: [0xd000-0xdfff] [ 1.040698] pci 0000:00:1c.3: bridge 32bit mmio: [0xfbd00000-0xfbdfffff] [ 1.040782] pci 0000:04:00.0: reg 24 32bit mmio: [0xfbcfe000-0xfbcfffff] [ 1.040790] pci 0000:04:00.0: reg 30 32bit mmio pref: [0xfbce0000-0xfbceffff] [ 1.040819] pci 0000:04:00.0: PME# supported from D3hot [ 1.040823] pci 0000:04:00.0: PME# disabled [ 1.040872] pci 0000:04:00.1: reg 10 io port: [0xcc00-0xcc07] [ 1.040880] pci 0000:04:00.1: reg 14 io port: [0xc880-0xc883] [ 1.040887] pci 0000:04:00.1: reg 18 io port: [0xc800-0xc807] [ 1.040895] pci 0000:04:00.1: reg 1c io port: [0xc480-0xc483] [ 1.040903] pci 0000:04:00.1: reg 20 io port: [0xc400-0xc40f] [ 1.040966] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 1.041027] pci 0000:00:1c.4: bridge io port: [0xc000-0xcfff] [ 1.041030] pci 0000:00:1c.4: bridge 32bit mmio: [0xfbc00000-0xfbcfffff] [ 1.041073] pci 0000:00:1e.0: transparent bridge [ 1.041106] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 1.041352] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 1.041435] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] [ 1.041482] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT] [ 1.041526] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT] [ 1.041570] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT] [ 1.041625] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE1._PRT] [ 1.041668] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE3._PRT] [ 1.041712] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE7._PRT] [ 1.061848] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 11 12 14 *15) [ 1.061940] ACPI: PCI Interrupt Link [LNKB] (IRQs *5) [ 1.062030] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12 14 15) [ 1.062123] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 *10 11 12 14 15) [ 1.062213] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 *4 6 7 10 11 12 14 15) [ 1.062304] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 *14 15) [ 1.062395] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 6 7 10 11 12 14 15) [ 1.062485] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 *7 10 11 12 14 15) [ 1.062570] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none [ 1.062572] vgaarb: loaded [ 1.062616] PCI: Using ACPI for IRQ routing [ 1.062760] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 1.062764] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 1.062767] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 1.076645] Switching to clocksource tsc [ 1.077480] pnp: PnP ACPI init [ 1.077488] ACPI: bus type pnp registered [ 1.079481] pnp: PnP ACPI: found 16 devices [ 1.079482] ACPI: ACPI bus type pnp unregistered [ 1.079489] system 00:01: iomem range 0xfbf00000-0xfbffffff has been reserved [ 1.079491] system 00:01: iomem range 0xfc000000-0xfcffffff has been reserved [ 1.079492] system 00:01: iomem range 0xfd000000-0xfdffffff has been reserved [ 1.079494] system 00:01: iomem range 0xfe000000-0xfebfffff has been reserved [ 1.079496] system 00:01: iomem range 0xfec8a000-0xfec8afff could not be reserved [ 1.079498] system 00:01: iomem range 0xfed10000-0xfed10fff has been reserved [ 1.079502] system 00:06: ioport range 0x290-0x29f has been reserved [ 1.079506] system 00:07: ioport range 0x4d0-0x4d1 has been reserved [ 1.079507] system 00:07: ioport range 0x800-0x87f has been reserved [ 1.079511] system 00:07: ioport range 0x500-0x57f has been reserved [ 1.079513] system 00:07: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 1.079515] system 00:07: iomem range 0xfed20000-0xfed3ffff has been reserved [ 1.079517] system 00:07: iomem range 0xfed40000-0xfed8ffff has been reserved [ 1.079520] system 00:0a: iomem range 0xffc00000-0xffdfffff has been reserved [ 1.079524] system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved [ 1.079526] system 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved [ 1.079529] system 00:0e: iomem range 0xe0000000-0xefffffff has been reserved [ 1.079532] system 00:0f: iomem range 0x0-0x9ffff could not be reserved [ 1.079534] system 00:0f: iomem range 0xc0000-0xcffff has been reserved [ 1.079536] system 00:0f: iomem range 0xe0000-0xfffff could not be reserved [ 1.079538] system 00:0f: iomem range 0x100000-0xbfffffff could not be reserved [ 1.079540] system 00:0f: iomem range 0xfed90000-0xffffffff could not be reserved [ 1.084238] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 1.084239] pci 0000:00:01.0: IO window: disabled [ 1.084242] pci 0000:00:01.0: MEM window: disabled [ 1.084245] pci 0000:00:01.0: PREFETCH window: disabled [ 1.084249] pci 0000:00:03.0: PCI bridge, secondary bus 0000:02 [ 1.084251] pci 0000:00:03.0: IO window: 0xb000-0xbfff [ 1.084254] pci 0000:00:03.0: MEM window: 0xfbb00000-0xfbbfffff [ 1.084257] pci 0000:00:03.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff [ 1.084261] pci 0000:00:07.0: PCI bridge, secondary bus 0000:03 [ 1.084262] pci 0000:00:07.0: IO window: disabled [ 1.084265] pci 0000:00:07.0: MEM window: disabled [ 1.084267] pci 0000:00:07.0: PREFETCH window: disabled [ 1.084271] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:07 [ 1.084273] pci 0000:00:1c.0: IO window: 0x1000-0x1fff [ 1.084276] pci 0000:00:1c.0: MEM window: 0xc0000000-0xc03fffff [ 1.084279] pci 0000:00:1c.0: PREFETCH window: 0x000000faf00000-0x000000faffffff [ 1.084284] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:06 [ 1.084286] pci 0000:00:1c.2: IO window: 0xe000-0xefff [ 1.084290] pci 0000:00:1c.2: MEM window: 0xfbe00000-0xfbefffff [ 1.084293] pci 0000:00:1c.2: PREFETCH window: 0x000000fae00000-0x000000faefffff [ 1.084297] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:05 [ 1.084299] pci 0000:00:1c.3: IO window: 0xd000-0xdfff [ 1.084303] pci 0000:00:1c.3: MEM window: 0xfbd00000-0xfbdfffff [ 1.084305] pci 0000:00:1c.3: PREFETCH window: 0x000000c0400000-0x000000c05fffff [ 1.084310] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:04 [ 1.084312] pci 0000:00:1c.4: IO window: 0xc000-0xcfff [ 1.084316] pci 0000:00:1c.4: MEM window: 0xfbc00000-0xfbcfffff [ 1.084319] pci 0000:00:1c.4: PREFETCH window: 0x000000c0600000-0x000000c07fffff [ 1.084323] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:08 [ 1.084324] pci 0000:00:1e.0: IO window: disabled [ 1.084327] pci 0000:00:1e.0: MEM window: disabled [ 1.084330] pci 0000:00:1e.0: PREFETCH window: disabled [ 1.084340] pci 0000:00:01.0: setting latency timer to 64 [ 1.084346] pci 0000:00:03.0: setting latency timer to 64 [ 1.084352] pci 0000:00:07.0: setting latency timer to 64 [ 1.084357] pci 0000:00:1c.0: enabling device (0106 -> 0107) [ 1.084361] alloc irq_desc for 17 on node -1 [ 1.084362] alloc kstat_irqs on node -1 [ 1.084364] alloc irq_2_iommu on node -1 [ 1.084369] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.084372] pci 0000:00:1c.0: setting latency timer to 64 [ 1.084377] alloc irq_desc for 18 on node -1 [ 1.084378] alloc kstat_irqs on node -1 [ 1.084380] alloc irq_2_iommu on node -1 [ 1.084384] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.084386] pci 0000:00:1c.2: setting latency timer to 64 [ 1.084392] alloc irq_desc for 19 on node -1 [ 1.084393] alloc kstat_irqs on node -1 [ 1.084395] alloc irq_2_iommu on node -1 [ 1.084398] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 1.084401] pci 0000:00:1c.3: setting latency timer to 64 [ 1.084407] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.084410] pci 0000:00:1c.4: setting latency timer to 64 [ 1.084414] pci 0000:00:1e.0: setting latency timer to 64 [ 1.084417] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 1.084419] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 1.084420] pci_bus 0000:02: resource 0 io: [0xb000-0xbfff] [ 1.084422] pci_bus 0000:02: resource 1 mem: [0xfbb00000-0xfbbfffff] [ 1.084423] pci_bus 0000:02: resource 2 pref mem [0xd0000000-0xdfffffff] [ 1.084425] pci_bus 0000:07: resource 0 io: [0x1000-0x1fff] [ 1.084426] pci_bus 0000:07: resource 1 mem: [0xc0000000-0xc03fffff] [ 1.084428] pci_bus 0000:07: resource 2 pref mem [0xfaf00000-0xfaffffff] [ 1.084429] pci_bus 0000:06: resource 0 io: [0xe000-0xefff] [ 1.084431] pci_bus 0000:06: resource 1 mem: [0xfbe00000-0xfbefffff] [ 1.084432] pci_bus 0000:06: resource 2 pref mem [0xfae00000-0xfaefffff] [ 1.084434] pci_bus 0000:05: resource 0 io: [0xd000-0xdfff] [ 1.084435] pci_bus 0000:05: resource 1 mem: [0xfbd00000-0xfbdfffff] [ 1.084437] pci_bus 0000:05: resource 2 pref mem [0xc0400000-0xc05fffff] [ 1.084438] pci_bus 0000:04: resource 0 io: [0xc000-0xcfff] [ 1.084439] pci_bus 0000:04: resource 1 mem: [0xfbc00000-0xfbcfffff] [ 1.084441] pci_bus 0000:04: resource 2 pref mem [0xc0600000-0xc07fffff] [ 1.084442] pci_bus 0000:08: resource 3 io: [0x00-0xffff] [ 1.084444] pci_bus 0000:08: resource 4 mem: [0x000000-0xffffffffffffffff] [ 1.084462] NET: Registered protocol family 2 [ 1.084612] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 1.085281] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 1.086363] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.086490] TCP: Hash tables configured (established 524288 bind 65536) [ 1.086492] TCP reno registered [ 1.086582] NET: Registered protocol family 1 [ 1.086716] pci 0000:02:00.0: Boot video device [ 1.086750] Unpacking initramfs... [ 1.248329] Freeing initrd memory: 10859k freed [ 1.250195] audit: initializing netlink socket (disabled) [ 1.250203] type=2000 audit(1306356582.995:1): initialized [ 1.252673] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.253519] VFS: Disk quotas dquot_6.5.2 [ 1.253550] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.253600] msgmni has been set to 11955 [ 1.253766] alg: No test for stdrng (krng) [ 1.253796] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 1.253798] io scheduler noop registered [ 1.253799] io scheduler anticipatory registered [ 1.253800] io scheduler deadline registered [ 1.253818] io scheduler cfq registered (default) [ 1.253910] alloc irq_desc for 50 on node -1 [ 1.253912] alloc kstat_irqs on node -1 [ 1.253915] alloc irq_2_iommu on node -1 [ 1.253923] pcieport 0000:00:01.0: irq 50 for MSI/MSI-X [ 1.253928] pcieport 0000:00:01.0: setting latency timer to 64 [ 1.254010] alloc irq_desc for 51 on node -1 [ 1.254011] alloc kstat_irqs on node -1 [ 1.254012] alloc irq_2_iommu on node -1 [ 1.254018] pcieport 0000:00:03.0: irq 51 for MSI/MSI-X [ 1.254023] pcieport 0000:00:03.0: setting latency timer to 64 [ 1.254102] alloc irq_desc for 52 on node -1 [ 1.254103] alloc kstat_irqs on node -1 [ 1.254106] alloc irq_2_iommu on node -1 [ 1.254112] pcieport 0000:00:07.0: irq 52 for MSI/MSI-X [ 1.254117] pcieport 0000:00:07.0: setting latency timer to 64 [ 1.254195] alloc irq_desc for 53 on node -1 [ 1.254196] alloc kstat_irqs on node -1 [ 1.254197] alloc irq_2_iommu on node -1 [ 1.254203] pcieport 0000:00:1c.0: irq 53 for MSI/MSI-X [ 1.254209] pcieport 0000:00:1c.0: setting latency timer to 64 [ 1.254293] alloc irq_desc for 54 on node -1 [ 1.254294] alloc kstat_irqs on node -1 [ 1.254296] alloc irq_2_iommu on node -1 [ 1.254302] pcieport 0000:00:1c.2: irq 54 for MSI/MSI-X [ 1.254308] pcieport 0000:00:1c.2: setting latency timer to 64 [ 1.254391] alloc irq_desc for 55 on node -1 [ 1.254392] alloc kstat_irqs on node -1 [ 1.254394] alloc irq_2_iommu on node -1 [ 1.254400] pcieport 0000:00:1c.3: irq 55 for MSI/MSI-X [ 1.254406] pcieport 0000:00:1c.3: setting latency timer to 64 [ 1.254491] alloc irq_desc for 56 on node -1 [ 1.254492] alloc kstat_irqs on node -1 [ 1.254494] alloc irq_2_iommu on node -1 [ 1.254500] pcieport 0000:00:1c.4: irq 56 for MSI/MSI-X [ 1.254506] pcieport 0000:00:1c.4: setting latency timer to 64 [ 1.254565] aer 0000:00:01.0:pcie02: AER service couldn't init device: no _OSC support [ 1.254570] aer 0000:00:03.0:pcie02: AER service couldn't init device: no _OSC support [ 1.254573] aer 0000:00:07.0:pcie02: AER service couldn't init device: no _OSC support [ 1.255376] Linux agpgart interface v0.103 [ 1.255399] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.255634] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 1.255669] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 1.258228] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.258232] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.258279] mice: PS/2 mouse device common for all mice [ 1.258303] rtc_cmos 00:03: RTC can wake from S4 [ 1.258325] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 1.258346] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.258354] cpuidle: using governor ladder [ 1.258355] cpuidle: using governor menu [ 1.258357] No iBFT detected. [ 1.258556] TCP cubic registered [ 1.258617] NET: Registered protocol family 10 [ 1.259096] Mobile IPv6 [ 1.259097] NET: Registered protocol family 17 [ 1.259139] PM: Resume from disk failed. [ 1.259144] registered taskstats version 1 [ 1.259613] rtc_cmos 00:03: setting system clock to 2011-05-25 20:49:43 UTC (1306356583) [ 1.259631] Initalizing network drop monitor service [ 1.259653] Freeing unused kernel memory: 592k freed [ 1.259734] Write protecting the kernel read-only data: 4240k [ 1.268193] udev[116]: starting version 164 [ 1.291910] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 1.295302] usbcore: registered new interface driver usbfs [ 1.295363] usbcore: registered new interface driver hub [ 1.295680] usbcore: registered new device driver usb [ 1.302839] [drm] Initialized drm 1.1.0 20060810 [ 1.317188] SCSI subsystem initialized [ 1.318111] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.318132] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.318163] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 1.318165] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 1.318185] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 1.318214] ehci_hcd 0000:00:1a.7: debug port 1 [ 1.322088] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 1.322108] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfbaff000 [ 1.325564] [drm] radeon kernel modesetting enabled. [ 1.325592] alloc irq_desc for 24 on node -1 [ 1.325593] alloc kstat_irqs on node -1 [ 1.325596] alloc irq_2_iommu on node -1 [ 1.325603] radeon 0000:02:00.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24 [ 1.325606] radeon 0000:02:00.0: setting latency timer to 64 [ 1.326418] [drm] radeon: Initializing kernel modesetting. [ 1.326557] [drm] register mmio base: 0xFBBC0000 [ 1.326558] [drm] register mmio size: 131072 [ 1.326598] ATOM BIOS: JUNIPER [ 1.326608] [drm] Clocks initialized ! [ 1.326619] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining [ 1.326621] [drm] Detected VRAM RAM=256M, BAR=256M [ 1.326622] [drm] RAM width 128bits DDR [ 1.326651] [TTM] Zone kernel: Available graphics memory: 3060914 kiB. [ 1.326652] [TTM] Zone dma32: Available graphics memory: 2097152 kiB. [ 1.326662] [drm] radeon: 256M of VRAM memory ready [ 1.326663] [drm] radeon: 512M of GTT memory ready. [ 1.328537] [drm] Radeon Display Connectors [ 1.328539] [drm] Connector 0: [ 1.328539] [drm] DisplayPort [ 1.328540] [drm] HPD4 [ 1.328541] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c [ 1.328543] [drm] Encoders: [ 1.328543] [drm] DFP1: INTERNAL_UNIPHY2 [ 1.328544] [drm] Connector 1: [ 1.328545] [drm] HDMI-A [ 1.328546] [drm] HPD5 [ 1.328547] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c [ 1.328548] [drm] Encoders: [ 1.328549] [drm] DFP2: INTERNAL_UNIPHY2 [ 1.328550] [drm] Connector 2: [ 1.328551] [drm] DVI-I [ 1.328551] [drm] HPD1 [ 1.328552] [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c [ 1.328553] [drm] Encoders: [ 1.328554] [drm] DFP3: INTERNAL_UNIPHY1 [ 1.328555] [drm] CRT2: INTERNAL_KLDSCP_DAC2 [ 1.328556] [drm] Connector 3: [ 1.328557] [drm] DVI-I [ 1.328558] [drm] HPD6 [ 1.328559] [drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c [ 1.328560] [drm] Encoders: [ 1.328561] [drm] DFP4: INTERNAL_UNIPHY [ 1.328562] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 1.334435] libata version 3.00 loaded. [ 1.337511] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 1.337535] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.337537] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.337539] usb usb1: Product: EHCI Host Controller [ 1.337540] usb usb1: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd [ 1.337542] usb usb1: SerialNumber: 0000:00:1a.7 [ 1.337592] usb usb1: configuration #1 chosen from 1 choice [ 1.337614] uhci_hcd: USB Universal Host Controller Interface driver [ 1.337631] hub 1-0:1.0: USB hub found [ 1.337641] hub 1-0:1.0: 6 ports detected [ 1.337700] alloc irq_desc for 16 on node -1 [ 1.337702] alloc kstat_irqs on node -1 [ 1.337706] alloc irq_2_iommu on node -1 [ 1.337712] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.337719] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 1.337722] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 1.337731] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 2 [ 1.337762] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000a800 [ 1.337794] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.337797] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.337799] usb usb2: Product: UHCI Host Controller [ 1.337801] usb usb2: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd [ 1.337802] usb usb2: SerialNumber: 0000:00:1a.0 [ 1.337854] usb usb2: configuration #1 chosen from 1 choice [ 1.337882] hub 2-0:1.0: USB hub found [ 1.337887] hub 2-0:1.0: 2 ports detected [ 1.337934] alloc irq_desc for 23 on node -1 [ 1.337936] alloc kstat_irqs on node -1 [ 1.337939] alloc irq_2_iommu on node -1 [ 1.337944] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 1.337964] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 1.337966] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 1.337973] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 3 [ 1.338001] ehci_hcd 0000:00:1d.7: debug port 1 [ 1.340336] firewire_ohci 0000:05:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 1.340341] firewire_ohci 0000:05:00.0: setting latency timer to 64 [ 1.341040] pata_jmicron 0000:04:00.1: enabling device (0000 -> 0001) [ 1.341046] pata_jmicron 0000:04:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.341067] pata_jmicron 0000:04:00.1: setting latency timer to 64 [ 1.341120] scsi0 : pata_jmicron [ 1.341175] scsi1 : pata_jmicron [ 1.341754] ata1: PATA max UDMA/100 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 17 [ 1.341755] ata2: PATA max UDMA/100 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 17 [ 1.341886] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 1.341896] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfbafe000 [ 1.342133] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.342146] r8169 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.342184] r8169 0000:06:00.0: setting latency timer to 64 [ 1.342233] alloc irq_desc for 57 on node -1 [ 1.342234] alloc kstat_irqs on node -1 [ 1.342237] alloc irq_2_iommu on node -1 [ 1.342250] r8169 0000:06:00.0: irq 57 for MSI/MSI-X [ 1.342601] eth0: RTL8168c/8111c at 0xffffc90000c76000, 48:5b:39:82:c8:f4, XID 1c4000c0 IRQ 57 [ 1.357488] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.357499] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.357500] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.357502] usb usb3: Product: EHCI Host Controller [ 1.357503] usb usb3: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd [ 1.357504] usb usb3: SerialNumber: 0000:00:1d.7 [ 1.357541] usb usb3: configuration #1 chosen from 1 choice [ 1.357557] hub 3-0:1.0: USB hub found [ 1.357560] hub 3-0:1.0: 6 ports detected [ 1.357602] alloc irq_desc for 21 on node -1 [ 1.357603] alloc kstat_irqs on node -1 [ 1.357605] alloc irq_2_iommu on node -1 [ 1.357610] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 1.357615] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 1.357617] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 1.357624] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 1.357653] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000a880 [ 1.357678] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.357680] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.357682] usb usb4: Product: UHCI Host Controller [ 1.357683] usb usb4: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd [ 1.357684] usb usb4: SerialNumber: 0000:00:1a.1 [ 1.357722] usb usb4: configuration #1 chosen from 1 choice [ 1.357746] hub 4-0:1.0: USB hub found [ 1.357751] hub 4-0:1.0: 2 ports detected [ 1.357790] ahci 0000:00:1f.2: version 3.0 [ 1.357798] alloc irq_desc for 20 on node -1 [ 1.357799] alloc kstat_irqs on node -1 [ 1.357803] alloc irq_2_iommu on node -1 [ 1.357807] ahci 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20 [ 1.357829] alloc irq_desc for 58 on node -1 [ 1.357830] alloc kstat_irqs on node -1 [ 1.357832] alloc irq_2_iommu on node -1 [ 1.357838] ahci 0000:00:1f.2: irq 58 for MSI/MSI-X [ 1.357845] ahci 0000:00:1f.2: controller can't do SNTF, turning off CAP_SNTF [ 1.357862] ahci: SSS flag set, parallel bus scan disabled [ 1.357896] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl RAID mode [ 1.357899] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pmp pio slum part ccc ems sxs [ 1.357902] ahci 0000:00:1f.2: setting latency timer to 64 [ 1.400617] scsi2 : ahci [ 1.400667] scsi3 : ahci [ 1.400721] scsi4 : ahci [ 1.400768] scsi5 : ahci [ 1.400814] scsi6 : ahci [ 1.400863] scsi7 : ahci [ 1.400975] ata3: SATA max UDMA/133 abar m2048@0xfbafc000 port 0xfbafc100 irq 58 [ 1.400977] ata4: SATA max UDMA/133 abar m2048@0xfbafc000 port 0xfbafc180 irq 58 [ 1.400979] ata5: SATA max UDMA/133 abar m2048@0xfbafc000 port 0xfbafc200 irq 58 [ 1.400981] ata6: SATA max UDMA/133 abar m2048@0xfbafc000 port 0xfbafc280 irq 58 [ 1.400983] ata7: SATA max UDMA/133 abar m2048@0xfbafc000 port 0xfbafc300 irq 58 [ 1.400985] ata8: SATA max UDMA/133 abar m2048@0xfbafc000 port 0xfbafc380 irq 58 [ 1.401017] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 1.401024] ahci 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.401026] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 1.401028] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 1.401036] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 1.401074] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000ac00 [ 1.401116] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.401117] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.401119] usb usb5: Product: UHCI Host Controller [ 1.401120] usb usb5: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd [ 1.401121] usb usb5: SerialNumber: 0000:00:1a.2 [ 1.401158] usb usb5: configuration #1 chosen from 1 choice [ 1.401181] hub 5-0:1.0: USB hub found [ 1.401186] hub 5-0:1.0: 2 ports detected [ 1.401224] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 1.401229] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.401231] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.401235] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 1.401256] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000a080 [ 1.401276] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.401277] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.401279] usb usb6: Product: UHCI Host Controller [ 1.401280] usb usb6: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd [ 1.401281] usb usb6: SerialNumber: 0000:00:1d.0 [ 1.401315] usb usb6: configuration #1 chosen from 1 choice [ 1.401338] hub 6-0:1.0: USB hub found [ 1.401343] hub 6-0:1.0: 2 ports detected [ 1.401378] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.401382] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 1.401384] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.401389] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 1.401409] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000a400 [ 1.401430] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.401431] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.401433] usb usb7: Product: UHCI Host Controller [ 1.401434] usb usb7: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd [ 1.401435] usb usb7: SerialNumber: 0000:00:1d.1 [ 1.401470] usb usb7: configuration #1 chosen from 1 choice [ 1.401492] hub 7-0:1.0: USB hub found [ 1.401497] hub 7-0:1.0: 2 ports detected [ 1.401538] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.401544] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 1.401546] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.401553] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 1.401576] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000a480 [ 1.401608] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.401610] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.401612] usb usb8: Product: UHCI Host Controller [ 1.401613] usb usb8: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd [ 1.401615] usb usb8: SerialNumber: 0000:00:1d.2 [ 1.401662] usb usb8: configuration #1 chosen from 1 choice [ 1.401685] hub 8-0:1.0: USB hub found [ 1.401690] hub 8-0:1.0: 2 ports detected [ 1.408588] firewire_ohci: Added fw-ohci device 0000:05:00.0, OHCI version 1.10 [ 1.416611] ahci 0000:04:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 1.416614] ahci 0000:04:00.0: flags: 64bit ncq pm led clo pmp pio slum part [ 1.416619] ahci 0000:04:00.0: setting latency timer to 64 [ 1.416704] scsi8 : ahci [ 1.416751] scsi9 : ahci [ 1.416818] ata9: SATA max UDMA/133 abar m8192@0xfbcfe000 port 0xfbcfe100 irq 16 [ 1.416821] ata10: SATA max UDMA/133 abar m8192@0xfbcfe000 port 0xfbcfe180 irq 16 [ 1.724618] [drm] fb mappable at 0xD0040000 [ 1.724619] [drm] vram apper at 0xD0000000 [ 1.724620] [drm] size 7257600 [ 1.724621] [drm] fb depth is 24 [ 1.724622] [drm] pitch is 6912 [ 1.740687] ata10: SATA link down (SStatus 0 SControl 300) [ 1.740937] ata9: SATA link down (SStatus 0 SControl 300) [ 1.768265] [drm:dp_link_train] *ERROR* channel eq failed: 5 tries [ 1.768267] [drm:dp_link_train] *ERROR* channel eq failed [ 1.781153] usb 3-2: new high speed USB device using ehci_hcd and address 3 [ 1.814237] Console: switching to colour frame buffer device 160x64 [ 1.816893] fb0: radeondrmfb frame buffer device [ 1.816894] registered panic notifier [ 1.816896] [drm] Initialized radeon 2.0.0 20080528 for 0000:02:00.0 on minor 0 [ 1.876362] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.882024] ata3.00: ATA-8: SAMSUNG HD103SJ, 1AJ10001, max UDMA/133 [ 1.882028] ata3.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 1.887748] ata3.00: configured for UDMA/133 [ 1.904445] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD103SJ 1AJ1 PQ: 0 ANSI: 5 [ 1.912389] firewire_core: created device fw0: GUID 001e8c0000d9e09b, S400 [ 1.916182] usb 3-2: New USB device found, idVendor=03f0, idProduct=2824 [ 1.916186] usb 3-2: New USB device strings: Mfr=0, Product=11, SerialNumber=0 [ 1.916188] usb 3-2: Product: USB 2.0 HUB [ 1.916252] usb 3-2: configuration #1 chosen from 1 choice [ 1.916592] hub 3-2:1.0: USB hub found [ 1.917059] hub 3-2:1.0: 2 ports detected [ 2.156216] usb 6-1: new full speed USB device using uhci_hcd and address 2 [ 2.349837] usb 6-1: New USB device found, idVendor=0ac8, idProduct=301b [ 2.349841] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.349843] usb 6-1: Product: PC Camera [ 2.349845] usb 6-1: Manufacturer: Z-Star Corp. [ 2.349909] usb 6-1: configuration #1 chosen from 1 choice [ 2.428327] usb 3-2.2: new high speed USB device using ehci_hcd and address 4 [ 2.520403] usb 3-2.2: New USB device found, idVendor=058f, idProduct=6254 [ 2.520406] usb 3-2.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.520467] usb 3-2.2: configuration #1 chosen from 1 choice [ 2.520564] hub 3-2.2:1.0: USB hub found [ 2.520654] hub 3-2.2:1.0: 4 ports detected [ 2.791902] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.797547] ata4.00: ATA-8: SAMSUNG HD103SJ, 1AJ10001, max UDMA/133 [ 2.797551] ata4.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 2.803272] ata4.00: configured for UDMA/133 [ 2.815967] scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD103SJ 1AJ1 PQ: 0 ANSI: 5 [ 3.703442] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.706426] ata5.00: ATAPI: HL-DT-ST DVDRAM GH22NS50, TN02, max UDMA/100 [ 3.710268] ata5.00: configured for UDMA/100 [ 3.730832] scsi 4:0:0:0: CD-ROM HL-DT-ST DVDRAM GH22NS50 TN02 PQ: 0 ANSI: 5 [ 4.048011] ata6: SATA link down (SStatus 0 SControl 300) [ 4.383090] ata7: SATA link down (SStatus 0 SControl 300) [ 4.718920] ata8: SATA link down (SStatus 0 SControl 300) [ 4.739652] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 4.739690] sd 3:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 4.739698] sd 2:0:0:0: [sda] Write Protect is off [ 4.739700] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.739721] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.739739] sd 3:0:0:0: [sdb] Write Protect is off [ 4.739742] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 4.739762] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.739847] sda: [ 4.739908] sdb:sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 4.745931] Uniform CD-ROM driver Revision: 3.20 [ 4.746033] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 4.747538] sda1 sda2 sda3 sda4 [ 4.752393] sdb1 sdb2 sdb3 sdb4 [ 4.755864] sd 2:0:0:0: [sda] Attached SCSI disk [ 4.760369] sd 3:0:0:0: [sdb] Attached SCSI disk [ 4.762594] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 4.762611] sd 3:0:0:0: Attached scsi generic sg1 type 0 [ 4.762630] sr 4:0:0:0: Attached scsi generic sg2 type 5 [ 4.795060] device-mapper: uevent: version 1.0.3 [ 4.795133] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 5.370798] PM: Starting manual resume from disk [ 5.370800] PM: Resume from partition 254:3 [ 5.370801] PM: Checking hibernation image. [ 5.370897] PM: Error -22 checking image file [ 5.370899] PM: Resume from disk failed. [ 5.398836] EXT4-fs (dm-1): mounted filesystem with ordered data mode [ 6.603656] udev[587]: starting version 164 [ 6.760562] ACPI: SSDT 00000000bf798200 0223C (v01 DpgPmm P001Ist 00000011 INTL 20060113) [ 6.763041] processor LNXCPU:00: registered as cooling_device0 [ 6.765149] processor LNXCPU:01: registered as cooling_device1 [ 6.767278] processor LNXCPU:02: registered as cooling_device2 [ 6.769399] processor LNXCPU:03: registered as cooling_device3 [ 6.771528] processor LNXCPU:04: registered as cooling_device4 [ 6.773657] processor LNXCPU:05: registered as cooling_device5 [ 6.775802] processor LNXCPU:06: registered as cooling_device6 [ 6.777931] processor LNXCPU:07: registered as cooling_device7 [ 6.924780] input: PC Speaker as /devices/platform/pcspkr/input/input2 [ 6.989325] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3 [ 6.989330] ACPI: Power Button [PWRB] [ 6.989368] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 [ 6.989372] ACPI: Power Button [PWRF] [ 7.354624] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 7.354628] ACPI: I/O resource 0000:00:1f.3 [0x400-0x41f] conflicts with ACPI region SMRG [0x400-0x40f] [ 7.354662] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 7.461251] Linux video capture interface: v2.00 [ 7.476487] gspca: main v2.7.0 registered [ 7.485561] gspca: probing 0ac8:301b [ 7.690054] alloc irq_desc for 22 on node -1 [ 7.690057] alloc kstat_irqs on node -1 [ 7.690061] alloc irq_2_iommu on node -1 [ 7.690068] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 7.690128] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 7.737638] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input5 [ 7.797360] hda_codec: ALC1200: BIOS auto-probing. [ 7.798769] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6 [ 7.802142] alloc irq_desc for 34 on node -1 [ 7.802143] alloc kstat_irqs on node -1 [ 7.802147] alloc irq_2_iommu on node -1 [ 7.802153] HDA Intel 0000:02:00.1: PCI INT B -> GSI 34 (level, low) -> IRQ 34 [ 7.802185] HDA Intel 0000:02:00.1: setting latency timer to 64 [ 7.805285] zc3xx: probe sensor -> 000a [ 7.805288] zc3xx: Find Sensor PB0330. Chip revision 0 [ 7.809316] gspca: probe ok [ 7.809335] usbcore: registered new interface driver zc3xx [ 7.809338] zc3xx: registered [ 11.526182] loop: module loaded [ 11.555714] Adding 11914224k swap on /dev/mapper/isw_bfidfade_Volume03. Priority:-1 extents:1 across:11914224k [ 11.812523] EXT4-fs (dm-4): mounted filesystem with ordered data mode [ 11.817465] EXT4-fs (dm-2): mounted filesystem with ordered data mode [ 12.431959] r8169: eth0: link up [ 12.431964] r8169: eth0: link up [ 12.893703] fuse init (API version 7.13) [ 17.124343] Bluetooth: Core ver 2.15 [ 17.124379] NET: Registered protocol family 31 [ 17.124381] Bluetooth: HCI device and connection manager initialized [ 17.124383] Bluetooth: HCI socket layer initialized [ 17.148428] Bluetooth: L2CAP ver 2.14 [ 17.148429] Bluetooth: L2CAP socket layer initialized [ 17.150612] Bluetooth: RFCOMM TTY layer initialized [ 17.150614] Bluetooth: RFCOMM socket layer initialized [ 17.150615] Bluetooth: RFCOMM ver 1.11 [ 17.177921] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 17.177922] Bluetooth: BNEP filters: protocol multicast [ 17.186544] Bridge firewalling registered [ 17.193994] Bluetooth: SCO (Voice Link) ver 0.6 [ 17.193996] Bluetooth: SCO socket layer initialized [ 17.357539] [drm:dp_link_train] *ERROR* channel eq failed: 5 tries [ 17.357542] [drm:dp_link_train] *ERROR* channel eq failed [ 17.408227] [drm:dp_link_train] *ERROR* channel eq failed: 5 tries [ 17.408228] [drm:dp_link_train] *ERROR* channel eq failed