Bug#587722: Additional problems
Pietro Battiston
me at pietrobattiston.it
Sat Sep 4 03:35:55 PDT 2010
Il giorno ven, 03/09/2010 alle 22.54 +0200, Julien Cristau ha scritto:
> On Fri, Sep 3, 2010 at 13:33:38 +0200, Pietro Battiston wrote:
>
> > I just discovered that the problem does not concern simply suspending,
> > but also
> > - switching to a virtual console,
> > - closing the current (GNOME, in my case) session (for instance to log
> > in as another user);
> >
> > in both cases, if I try to execute the action, the screen just becomes
> > dark and I have to reset the machine (REISUB works)... it seems to me
> > very probable that the bug is the same (also because I'm pretty sure
> > that both worked with older kernels).
> >
> Is the machine reachable over the network when this happens?
Yes
> If so can
> you get the kernel log at that point?
Done: I'm attaching dmesg and Xorg.0.log, which seems more interesting
(both after starting the system, waiting for gdm prompt, switching to a
virtual console and waiting several seconds).
>
> Also please try the 2.6.35 kernel (in experimental). If you still have
> issues there, please forward the bug upstream to bugs.freedesktop.org,
> attaching your Xorg log and dmesg.
Done:
https://bugs.freedesktop.org/show_bug.cgi?id=30010
(Notice that the logs are not exactly the same: in this Debian bug
report, I'm still posting the ones with 2.6.32-5. However when we come
to the problem they seem similar.)
Cheers,
Pietro
-------------- next part --------------
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-amd64 (Debian 2.6.32-20) (ben at decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-2) ) #1 SMP Thu Aug 12 13:01:50 UTC 2010
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64 root=UUID=729cb79a-e959-480e-b107-2fbfea6859d4 ro quiet hpet=disable
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000afb8f000 (usable)
[ 0.000000] BIOS-e820: 00000000afb8f000 - 00000000afc3c000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000afc3c000 - 00000000afd70000 (usable)
[ 0.000000] BIOS-e820: 00000000afd70000 - 00000000afdbf000 (reserved)
[ 0.000000] BIOS-e820: 00000000afdbf000 - 00000000afe58000 (usable)
[ 0.000000] BIOS-e820: 00000000afe58000 - 00000000afebf000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000afebf000 - 00000000afeed000 (usable)
[ 0.000000] BIOS-e820: 00000000afeed000 - 00000000afeff000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000afeff000 - 00000000aff00000 (usable)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000e4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.4 present.
[ 0.000000] last_pfn = 0xaff00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 00FFF00000 mask FFFFF00000 write-protect
[ 0.000000] 1 base 0000000000 mask FF80000000 write-back
[ 0.000000] 2 base 0080000000 mask FFE0000000 write-back
[ 0.000000] 3 base 00A0000000 mask FFF0000000 write-back
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000aff00000
[ 0.000000] 0000000000 - 00afe00000 page 2M
[ 0.000000] 00afe00000 - 00aff00000 page 4k
[ 0.000000] kernel direct mapping tables up to aff00000 @ 8000-d000
[ 0.000000] RAMDISK: 37747000 - 37fefaa2
[ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 HP )
[ 0.000000] ACPI: XSDT 00000000afefe120 0005C (v01 HPQOEM SLIC-MPC 00000003 01000013)
[ 0.000000] ACPI: FACP 00000000afefd000 000F4 (v04 HP 30F1 00000003 MSFT 0100000D)
[ 0.000000] ACPI: DSDT 00000000afef0000 092A1 (v01 HP 30F1 F0000000 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000afe61000 00040
[ 0.000000] ACPI: HPET 00000000afefc000 00038 (v01 HP 30F1 00000001 MSFT 000F4240)
[ 0.000000] ACPI: APIC 00000000afefb000 00084 (v02 HP 30F1 00000001 TFSM 000F4240)
[ 0.000000] ACPI: MCFG 00000000afefa000 0003C (v01 HP 30F1 00000001 TFSM 000F4240)
[ 0.000000] ACPI: BOOT 00000000afeef000 00028 (v01 HP 30F1 00000001 ? 00000001)
[ 0.000000] ACPI: SLIC 00000000afeee000 00176 (v01 HPQOEM SLIC-MPC 06040000 LTP 00000001)
[ 0.000000] ACPI: SSDT 00000000afeed000 00386 (v01 AMD PowerNow 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-00000000aff00000
[ 0.000000] Bootmem setup node 0 0000000000000000-00000000aff00000
[ 0.000000] NODE_DATA [000000000000b000 - 0000000000012fff]
[ 0.000000] bootmap [0000000000013000 - 0000000000028fdf] pages 16
[ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 00aff00000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 0001684354] TEXT DATA BSS ==> [0001000000 - 0001684354]
[ 0.000000] #3 [0037747000 - 0037fefaa2] RAMDISK ==> [0037747000 - 0037fefaa2]
[ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #5 [0001685000 - 00016851f0] BRK ==> [0001685000 - 00016851f0]
[ 0.000000] #6 [0000008000 - 000000b000] PGTABLE ==> [0000008000 - 000000b000]
[ 0.000000] [ffffea0000000000-ffffea00027fffff] PMD -> [ffff880001c00000-ffff8800043fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00100000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[6] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000afb8f
[ 0.000000] 0: 0x000afc3c -> 0x000afd70
[ 0.000000] 0: 0x000afdbf -> 0x000afe58
[ 0.000000] 0: 0x000afebf -> 0x000afeed
[ 0.000000] 0: 0x000afeff -> 0x000aff00
[ 0.000000] On node 0 totalpages: 720170
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 102 pages reserved
[ 0.000000] DMA zone: 3841 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 9797 pages used for memmap
[ 0.000000] DMA32 zone: 706374 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x1002a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000afb8f000 - 00000000afc3c000
[ 0.000000] PM: Registered nosave memory: 00000000afd70000 - 00000000afdbf000
[ 0.000000] PM: Registered nosave memory: 00000000afe58000 - 00000000afebf000
[ 0.000000] PM: Registered nosave memory: 00000000afeed000 - 00000000afeff000
[ 0.000000] Allocating PCI resources starting at aff00000 (gap: aff00000:30100000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880001800000 s90328 r8192 d24360 u524288
[ 0.000000] pcpu-alloc: s90328 r8192 d24360 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 710215
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64 root=UUID=729cb79a-e959-480e-b107-2fbfea6859d4 ro quiet hpet=disable
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 2823360k/2882560k available (3067k kernel code, 1880k absent, 57320k reserved, 1886k data, 584k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:440
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1049.509 MHz processor.
[ 0.012017] Calibrating delay loop (skipped), value calculated using timer frequency.. 4198.02 BogoMIPS (lpj=8396044)
[ 0.012116] Security Framework initialized
[ 0.012134] SELinux: Disabled at boot.
[ 0.013450] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.017957] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.020000] Mount-cache hash table entries: 256
[ 0.020000] Initializing cgroup subsys ns
[ 0.020000] Initializing cgroup subsys cpuacct
[ 0.020000] Initializing cgroup subsys devices
[ 0.020000] Initializing cgroup subsys freezer
[ 0.020000] Initializing cgroup subsys net_cls
[ 0.020000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.020000] CPU: L2 Cache: 1024K (64 bytes/line)
[ 0.020000] CPU 0/0x0 -> Node 0
[ 0.020000] tseg: 00aff00000
[ 0.020000] CPU: Physical Processor ID: 0
[ 0.020000] CPU: Processor Core ID: 0
[ 0.020000] mce: CPU supports 5 MCE banks
[ 0.020000] Performance Events: AMD PMU driver.
[ 0.020000] ... version: 0
[ 0.020000] ... bit width: 48
[ 0.020000] ... generic registers: 4
[ 0.020000] ... value mask: 0000ffffffffffff
[ 0.020000] ... max period: 00007fffffffffff
[ 0.020000] ... fixed-purpose events: 0
[ 0.020000] ... event mask: 000000000000000f
[ 0.022064] ACPI: Core revision 20090903
[ 0.040342] Setting APIC routing to flat
[ 0.041118] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.084001] CPU0: AMD Turion(tm) X2 Ultra Dual-Core Mobile ZM-80 stepping 01
[ 0.084001] APIC calibration not consistent with PM-Timer: 376ms instead of 100ms
[ 0.084001] APIC delta adjusted to PM-Timer: 1249482 (4698635)
[ 0.084001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.016000] Initializing CPU#1
[ 0.016000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.016000] CPU: L2 Cache: 1024K (64 bytes/line)
[ 0.016000] CPU 1/0x1 -> Node 0
[ 0.016000] CPU: Physical Processor ID: 0
[ 0.016000] CPU: Processor Core ID: 1
[ 0.168098] CPU1: AMD Turion(tm) X2 Ultra Dual-Core Mobile ZM-80 stepping 01
[ 0.168197] checking TSC synchronization [CPU#0 -> CPU#1]:
[ 0.172001] Measured 207542865 cycles TSC warp between CPUs, turning off TSC clock.
[ 0.172001] Marking TSC unstable due to check_tsc_sync_source failed
[ 0.172039] Brought up 2 CPUs
[ 0.172050] Total of 2 processors activated (8396.52 BogoMIPS).
[ 0.172718] CPU0 attaching sched-domain:
[ 0.172730] domain 0: span 0-1 level MC
[ 0.172740] groups: 0 1
[ 0.172764] CPU1 attaching sched-domain:
[ 0.172772] domain 0: span 0-1 level MC
[ 0.172781] groups: 1 0
[ 0.173070] devtmpfs: initialized
[ 0.180001] regulator: core version 0.5
[ 0.180045] NET: Registered protocol family 16
[ 0.180533] TOM: 00000000c0000000 aka 3072M
[ 0.180543] Fam 10h mmconf [e0000000, e0ffffff]
[ 0.180590] ACPI: bus type pci registered
[ 0.180895] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 63
[ 0.180907] PCI: MCFG area at e0000000 reserved in E820
[ 0.186350] PCI: Using MMCONFIG at e0000000 - e3ffffff
[ 0.186359] PCI: Using configuration type 1 for base access
[ 0.186643] mtrr: your CPUs had inconsistent fixed MTRR settings
[ 0.186652] mtrr: probably your BIOS does not setup all CPUs.
[ 0.186659] mtrr: corrected configuration.
[ 0.188001] bio: create slab <bio-0> at 0
[ 0.188001] ACPI: EC: Look up EC in DSDT
[ 0.191442] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.196871] ACPI: BIOS _OSI(Linux) query ignored
[ 0.198177] ACPI: Interpreter enabled
[ 0.198177] ACPI: (supports S0 S3 S4 S5)
[ 0.198177] ACPI: Using IOAPIC for interrupt routing
[ 0.212001] ACPI: EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
[ 0.212001] ACPI: No dock devices found.
[ 0.215718] _OSC request failed
[ 0.215729] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.216001] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 0.216001] pci 0000:00:04.0: PME# disabled
[ 0.216001] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[ 0.216001] pci 0000:00:05.0: PME# disabled
[ 0.216001] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[ 0.216001] pci 0000:00:06.0: PME# disabled
[ 0.216001] pci 0000:00:11.0: reg 10 io port: [0x6038-0x603f]
[ 0.216001] pci 0000:00:11.0: reg 14 io port: [0x604c-0x604f]
[ 0.216001] pci 0000:00:11.0: reg 18 io port: [0x6030-0x6037]
[ 0.216001] pci 0000:00:11.0: reg 1c io port: [0x6048-0x604b]
[ 0.216001] pci 0000:00:11.0: reg 20 io port: [0x6010-0x601f]
[ 0.216001] pci 0000:00:11.0: reg 24 32bit mmio: [0xd2509000-0xd25093ff]
[ 0.216001] pci 0000:00:12.0: reg 10 32bit mmio: [0xd2508000-0xd2508fff]
[ 0.216001] pci 0000:00:12.1: reg 10 32bit mmio: [0xd2507000-0xd2507fff]
[ 0.216001] pci 0000:00:12.2: reg 10 32bit mmio: [0xd2509500-0xd25095ff]
[ 0.216001] pci 0000:00:12.2: supports D1 D2
[ 0.216001] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.216001] pci 0000:00:12.2: PME# disabled
[ 0.216001] pci 0000:00:13.0: reg 10 32bit mmio: [0xd2506000-0xd2506fff]
[ 0.216001] pci 0000:00:13.1: reg 10 32bit mmio: [0xd2505000-0xd2505fff]
[ 0.216001] pci 0000:00:13.2: reg 10 32bit mmio: [0xd2509400-0xd25094ff]
[ 0.216001] pci 0000:00:13.2: supports D1 D2
[ 0.216001] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.216001] pci 0000:00:13.2: PME# disabled
[ 0.216001] pci 0000:00:14.1: reg 10 io port: [0x00-0x07]
[ 0.216001] pci 0000:00:14.1: reg 14 io port: [0x00-0x03]
[ 0.216001] pci 0000:00:14.1: reg 18 io port: [0x00-0x07]
[ 0.216001] pci 0000:00:14.1: reg 1c io port: [0x00-0x03]
[ 0.216001] pci 0000:00:14.1: reg 20 io port: [0x6000-0x600f]
[ 0.216001] pci 0000:00:14.2: reg 10 64bit mmio: [0xd2500000-0xd2503fff]
[ 0.216001] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.216001] pci 0000:00:14.2: PME# disabled
[ 0.216001] pci 0000:00:14.5: reg 10 32bit mmio: [0xd2504000-0xd2504fff]
[ 0.216001] pci 0000:01:05.0: reg 10 32bit mmio pref: [0xc0000000-0xcfffffff]
[ 0.216001] pci 0000:01:05.0: reg 14 io port: [0x5000-0x50ff]
[ 0.216001] pci 0000:01:05.0: reg 18 32bit mmio: [0xd2400000-0xd240ffff]
[ 0.216033] pci 0000:01:05.0: reg 24 32bit mmio: [0xd2300000-0xd23fffff]
[ 0.216082] pci 0000:01:05.0: supports D1 D2
[ 0.216222] pci 0000:00:01.0: bridge io port: [0x5000-0x5fff]
[ 0.216235] pci 0000:00:01.0: bridge 32bit mmio: [0xd2300000-0xd24fffff]
[ 0.216252] pci 0000:00:01.0: bridge 64bit mmio pref: [0xc0000000-0xcfffffff]
[ 0.216392] pci 0000:00:04.0: bridge io port: [0x3000-0x4fff]
[ 0.216405] pci 0000:00:04.0: bridge 32bit mmio: [0xd1300000-0xd22fffff]
[ 0.216423] pci 0000:00:04.0: bridge 64bit mmio pref: [0xd0000000-0xd0ffffff]
[ 0.216569] pci 0000:08:00.0: reg 10 64bit mmio: [0xd1200000-0xd1203fff]
[ 0.216605] pci 0000:08:00.0: reg 18 64bit mmio pref: [0xd1000000-0xd10fffff]
[ 0.216728] pci 0000:08:00.0: supports D1 D2
[ 0.224243] pci 0000:00:05.0: bridge 32bit mmio: [0xd1200000-0xd12fffff]
[ 0.224260] pci 0000:00:05.0: bridge 64bit mmio pref: [0xd1000000-0xd10fffff]
[ 0.224377] pci 0000:09:00.0: reg 10 io port: [0x2000-0x20ff]
[ 0.224424] pci 0000:09:00.0: reg 18 64bit mmio pref: [0xd1110000-0xd1110fff]
[ 0.224461] pci 0000:09:00.0: reg 20 64bit mmio pref: [0xd1100000-0xd110ffff]
[ 0.224484] pci 0000:09:00.0: reg 30 32bit mmio pref: [0xffff0000-0xffffffff]
[ 0.224569] pci 0000:09:00.0: supports D1 D2
[ 0.224578] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.224593] pci 0000:09:00.0: PME# disabled
[ 0.232209] pci 0000:00:06.0: bridge io port: [0x2000-0x2fff]
[ 0.232230] pci 0000:00:06.0: bridge 64bit mmio pref: [0xd1100000-0xd11fffff]
[ 0.232390] pci 0000:00:14.4: transparent bridge
[ 0.232406] pci 0000:00:14.4: bridge io port: [0x1000-0x1fff]
[ 0.232499] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.233545] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 0.233854] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB4_._PRT]
[ 0.234184] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB5_._PRT]
[ 0.234481] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB6_._PRT]
[ 0.234921] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 0.235598] _OSC request failed
[ 0.259920] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.260001] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.260001] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.260001] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.260001] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.260001] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.260001] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.260001] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.260147] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.260162] vgaarb: loaded
[ 0.260324] PCI: Using ACPI for IRQ routing
[ 0.264001] pnp: PnP ACPI init
[ 0.264001] ACPI: bus type pnp registered
[ 0.268747] pnp: PnP ACPI: found 12 devices
[ 0.268755] ACPI: ACPI bus type pnp unregistered
[ 0.268803] system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.268817] system 00:01: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.268851] system 00:09: ioport range 0x400-0x4cf has been reserved
[ 0.268863] system 00:09: ioport range 0x4d0-0x4d1 has been reserved
[ 0.268876] system 00:09: ioport range 0x4d6-0x4d6 has been reserved
[ 0.268888] system 00:09: ioport range 0x680-0x6ff has been reserved
[ 0.268901] system 00:09: ioport range 0x77a-0x77a has been reserved
[ 0.268913] system 00:09: ioport range 0xc00-0xc01 has been reserved
[ 0.268926] system 00:09: ioport range 0xc14-0xc14 has been reserved
[ 0.268939] system 00:09: ioport range 0xc50-0xc52 has been reserved
[ 0.268951] system 00:09: ioport range 0xc6c-0xc6c has been reserved
[ 0.268964] system 00:09: ioport range 0xc6f-0xc6f has been reserved
[ 0.268976] system 00:09: ioport range 0xcd0-0xcdb has been reserved
[ 0.268999] system 00:0a: iomem range 0xe0000-0xfffff could not be reserved
[ 0.269013] system 00:0a: iomem range 0xfff00000-0xffffffff has been reserved
[ 0.275156] Switching to clocksource acpi_pm
[ 0.275225] pci 0000:09:00.0: BAR 6: no parent found for of device [0xffff0000-0xffffffff]
[ 0.275225] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.275225] pci 0000:00:01.0: IO window: 0x5000-0x5fff
[ 0.275225] pci 0000:00:01.0: MEM window: 0xd2300000-0xd24fffff
[ 0.275225] pci 0000:00:01.0: PREFETCH window: 0x000000c0000000-0x000000cfffffff
[ 0.275225] pci 0000:00:04.0: PCI bridge, secondary bus 0000:02
[ 0.275225] pci 0000:00:04.0: IO window: 0x3000-0x4fff
[ 0.275225] pci 0000:00:04.0: MEM window: 0xd1300000-0xd22fffff
[ 0.275225] pci 0000:00:04.0: PREFETCH window: 0x000000d0000000-0x000000d0ffffff
[ 0.275225] pci 0000:00:05.0: PCI bridge, secondary bus 0000:08
[ 0.275225] pci 0000:00:05.0: IO window: disabled
[ 0.275225] pci 0000:00:05.0: MEM window: 0xd1200000-0xd12fffff
[ 0.275225] pci 0000:00:05.0: PREFETCH window: 0x000000d1000000-0x000000d10fffff
[ 0.275225] pci 0000:00:06.0: PCI bridge, secondary bus 0000:09
[ 0.275225] pci 0000:00:06.0: IO window: 0x2000-0x2fff
[ 0.275225] pci 0000:00:06.0: MEM window: 0xb0000000-0xb00fffff
[ 0.275225] pci 0000:00:06.0: PREFETCH window: 0x000000d1100000-0x000000d11fffff
[ 0.275225] pci 0000:00:14.4: PCI bridge, secondary bus 0000:80
[ 0.275225] pci 0000:00:14.4: IO window: 0x1000-0x1fff
[ 0.275225] pci 0000:00:14.4: MEM window: disabled
[ 0.275225] pci 0000:00:14.4: PREFETCH window: disabled
[ 0.275225] pci 0000:00:01.0: setting latency timer to 64
[ 0.275225] alloc irq_desc for 16 on node -1
[ 0.275225] alloc kstat_irqs on node -1
[ 0.275225] pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.275225] pci 0000:00:04.0: setting latency timer to 64
[ 0.275225] alloc irq_desc for 17 on node -1
[ 0.275225] alloc kstat_irqs on node -1
[ 0.275225] pci 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.275225] pci 0000:00:05.0: setting latency timer to 64
[ 0.275225] alloc irq_desc for 18 on node -1
[ 0.275225] alloc kstat_irqs on node -1
[ 0.275225] pci 0000:00:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.275225] pci 0000:00:06.0: setting latency timer to 64
[ 0.275225] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.275225] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.275225] pci_bus 0000:01: resource 0 io: [0x5000-0x5fff]
[ 0.275225] pci_bus 0000:01: resource 1 mem: [0xd2300000-0xd24fffff]
[ 0.275225] pci_bus 0000:01: resource 2 pref mem [0xc0000000-0xcfffffff]
[ 0.275225] pci_bus 0000:02: resource 0 io: [0x3000-0x4fff]
[ 0.275225] pci_bus 0000:02: resource 1 mem: [0xd1300000-0xd22fffff]
[ 0.275225] pci_bus 0000:02: resource 2 pref mem [0xd0000000-0xd0ffffff]
[ 0.275225] pci_bus 0000:08: resource 1 mem: [0xd1200000-0xd12fffff]
[ 0.275225] pci_bus 0000:08: resource 2 pref mem [0xd1000000-0xd10fffff]
[ 0.275225] pci_bus 0000:09: resource 0 io: [0x2000-0x2fff]
[ 0.275225] pci_bus 0000:09: resource 1 mem: [0xb0000000-0xb00fffff]
[ 0.275225] pci_bus 0000:09: resource 2 pref mem [0xd1100000-0xd11fffff]
[ 0.275225] pci_bus 0000:80: resource 0 io: [0x1000-0x1fff]
[ 0.275225] pci_bus 0000:80: resource 3 io: [0x00-0xffff]
[ 0.275225] pci_bus 0000:80: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.275225] NET: Registered protocol family 2
[ 0.275225] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.277657] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.284014] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.285663] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.285674] TCP reno registered
[ 0.286138] NET: Registered protocol family 1
[ 0.756179] pci 0000:01:05.0: Boot video device
[ 0.756434] Unpacking initramfs...
[ 1.216043] Freeing initrd memory: 8866k freed
[ 1.225493] Simple Boot Flag at 0x44 set to 0x1
[ 1.226846] audit: initializing netlink socket (disabled)
[ 1.226891] type=2000 audit(1283592825.224:1): initialized
[ 1.232367] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.236197] VFS: Disk quotas dquot_6.5.2
[ 1.236197] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.236197] msgmni has been set to 5531
[ 1.236380] alg: No test for stdrng (krng)
[ 1.236380] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.236380] io scheduler noop registered
[ 1.236380] io scheduler anticipatory registered
[ 1.236380] io scheduler deadline registered
[ 1.236487] io scheduler cfq registered (default)
[ 1.237069] alloc irq_desc for 24 on node -1
[ 1.237079] alloc kstat_irqs on node -1
[ 1.237117] pcieport 0000:00:04.0: irq 24 for MSI/MSI-X
[ 1.237140] pcieport 0000:00:04.0: setting latency timer to 64
[ 1.237500] alloc irq_desc for 25 on node -1
[ 1.237508] alloc kstat_irqs on node -1
[ 1.237529] pcieport 0000:00:05.0: irq 25 for MSI/MSI-X
[ 1.237548] pcieport 0000:00:05.0: setting latency timer to 64
[ 1.237846] alloc irq_desc for 26 on node -1
[ 1.237854] alloc kstat_irqs on node -1
[ 1.237874] pcieport 0000:00:06.0: irq 26 for MSI/MSI-X
[ 1.237893] pcieport 0000:00:06.0: setting latency timer to 64
[ 1.240837] hpet_acpi_add: no address or irqs in _CRS
[ 1.240960] Linux agpgart interface v0.103
[ 1.241150] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.242788] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 1.243026] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.258206] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.258233] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.258520] mice: PS/2 mouse device common for all mice
[ 1.258695] rtc_cmos 00:05: RTC can wake from S4
[ 1.258862] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 1.258937] rtc0: alarms up to one day, 114 bytes nvram
[ 1.258986] cpuidle: using governor ladder
[ 1.258995] cpuidle: using governor menu
[ 1.259015] No iBFT detected.
[ 1.260326] TCP cubic registered
[ 1.260816] NET: Registered protocol family 10
[ 1.261832] lo: Disabled Privacy Extensions
[ 1.262349] Mobile IPv6
[ 1.262359] NET: Registered protocol family 17
[ 1.262673] PM: Resume from disk failed.
[ 1.262749] registered taskstats version 1
[ 1.264044] rtc_cmos 00:05: setting system clock to 2010-09-04 09:33:46 UTC (1283592826)
[ 1.264044] Initalizing network drop monitor service
[ 1.264044] Freeing unused kernel memory: 584k freed
[ 1.264044] Write protecting the kernel read-only data: 4220k
[ 1.276010] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 1.288021] udev: starting version 160
[ 1.404539] ACPI Exception: AE_OK, No or invalid critical threshold (20090903/thermal-386)
[ 1.414910] usbcore: registered new interface driver usbfs
[ 1.414971] usbcore: registered new interface driver hub
[ 1.432545] usbcore: registered new device driver usb
[ 1.444018] SCSI subsystem initialized
[ 1.492434] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.492501] r8169 0000:09:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.492542] r8169 0000:09:00.0: setting latency timer to 64
[ 1.492542] alloc irq_desc for 27 on node -1
[ 1.492542] alloc kstat_irqs on node -1
[ 1.492542] r8169 0000:09:00.0: irq 27 for MSI/MSI-X
[ 1.492542] eth0: RTL8168c/8111c at 0xffffc9000067a000, 00:1e:68:7f:f0:36, XID 1c4000c0 IRQ 27
[ 1.496506] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.496506] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.496506] ehci_hcd 0000:00:12.2: setting latency timer to 64
[ 1.496506] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 1.496506] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 1.496506] ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround
[ 1.496506] ehci_hcd 0000:00:12.2: debug port 1
[ 1.496506] ehci_hcd 0000:00:12.2: irq 17, io mem 0xd2509500
[ 1.504544] libata version 3.00 loaded.
[ 1.506065] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.506414] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.506414] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.506414] usb usb1: Product: EHCI Host Controller
[ 1.506414] usb usb1: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
[ 1.506414] usb usb1: SerialNumber: 0000:00:12.2
[ 1.506414] usb usb1: configuration #1 chosen from 1 choice
[ 1.506414] hub 1-0:1.0: USB hub found
[ 1.506414] hub 1-0:1.0: 6 ports detected
[ 1.506536] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.506611] pata_atiixp 0000:00:14.1: setting latency timer to 64
[ 1.507282] scsi0 : pata_atiixp
[ 1.507377] scsi1 : pata_atiixp
[ 1.508546] ata1: DUMMY
[ 1.508546] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x6008 irq 15
[ 1.508546] alloc irq_desc for 19 on node -1
[ 1.508546] alloc kstat_irqs on node -1
[ 1.508546] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.508546] ehci_hcd 0000:00:13.2: setting latency timer to 64
[ 1.508546] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 1.508546] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 1.508546] ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround
[ 1.508546] ehci_hcd 0000:00:13.2: debug port 1
[ 1.508546] ehci_hcd 0000:00:13.2: irq 19, io mem 0xd2509400
[ 1.516585] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.516709] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.516722] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.516734] usb usb2: Product: EHCI Host Controller
[ 1.516742] usb usb2: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
[ 1.516751] usb usb2: SerialNumber: 0000:00:13.2
[ 1.517097] usb usb2: configuration #1 chosen from 1 choice
[ 1.517229] hub 2-0:1.0: USB hub found
[ 1.517266] hub 2-0:1.0: 6 ports detected
[ 1.592049] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.592049] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.592049] ohci_hcd 0000:00:12.0: setting latency timer to 64
[ 1.592049] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 1.592049] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 1.592049] ohci_hcd 0000:00:12.0: irq 16, io mem 0xd2508000
[ 1.648132] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.648150] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.648162] usb usb3: Product: OHCI Host Controller
[ 1.648172] usb usb3: Manufacturer: Linux 2.6.32-5-amd64 ohci_hcd
[ 1.648182] usb usb3: SerialNumber: 0000:00:12.0
[ 1.648549] usb usb3: configuration #1 chosen from 1 choice
[ 1.648681] hub 3-0:1.0: USB hub found
[ 1.648790] hub 3-0:1.0: 3 ports detected
[ 1.649043] ahci 0000:00:11.0: version 3.0
[ 1.649043] alloc irq_desc for 22 on node -1
[ 1.649043] alloc kstat_irqs on node -1
[ 1.649043] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 1.649043] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 1.649043] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio ccc
[ 1.649482] scsi2 : ahci
[ 1.649482] scsi3 : ahci
[ 1.649549] ata3: SATA max UDMA/133 abar m1024 at 0xd2509000 port 0xd2509100 irq 22
[ 1.649558] ata4: SATA max UDMA/133 abar m1024 at 0xd2509000 port 0xd2509180 irq 22
[ 1.649663] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.649819] ohci_hcd 0000:00:12.1: setting latency timer to 64
[ 1.649819] ohci_hcd 0000:00:12.1: OHCI Host Controller
[ 1.649819] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
[ 1.649819] ohci_hcd 0000:00:12.1: irq 16, io mem 0xd2507000
[ 1.708070] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.708082] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.708093] usb usb4: Product: OHCI Host Controller
[ 1.708102] usb usb4: Manufacturer: Linux 2.6.32-5-amd64 ohci_hcd
[ 1.708110] usb usb4: SerialNumber: 0000:00:12.1
[ 1.708366] usb usb4: configuration #1 chosen from 1 choice
[ 1.708480] hub 4-0:1.0: USB hub found
[ 1.708602] hub 4-0:1.0: 3 ports detected
[ 1.708863] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.708910] ohci_hcd 0000:00:13.0: setting latency timer to 64
[ 1.708922] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 1.708954] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 1.709049] ohci_hcd 0000:00:13.0: irq 18, io mem 0xd2506000
[ 1.768100] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.768112] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.768122] usb usb5: Product: OHCI Host Controller
[ 1.768131] usb usb5: Manufacturer: Linux 2.6.32-5-amd64 ohci_hcd
[ 1.768141] usb usb5: SerialNumber: 0000:00:13.0
[ 1.768413] usb usb5: configuration #1 chosen from 1 choice
[ 1.768547] hub 5-0:1.0: USB hub found
[ 1.768579] hub 5-0:1.0: 3 ports detected
[ 1.768830] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.768873] ohci_hcd 0000:00:13.1: setting latency timer to 64
[ 1.768886] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 1.768916] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
[ 1.768969] ohci_hcd 0000:00:13.1: irq 18, io mem 0xd2505000
[ 1.816052] usb 1-4: new high speed USB device using ehci_hcd and address 2
[ 1.828069] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.828081] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.828092] usb usb6: Product: OHCI Host Controller
[ 1.828101] usb usb6: Manufacturer: Linux 2.6.32-5-amd64 ohci_hcd
[ 1.828110] usb usb6: SerialNumber: 0000:00:13.1
[ 1.828353] usb usb6: configuration #1 chosen from 1 choice
[ 1.828473] hub 6-0:1.0: USB hub found
[ 1.828506] hub 6-0:1.0: 3 ports detected
[ 1.828768] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.828814] ohci_hcd 0000:00:14.5: setting latency timer to 64
[ 1.828826] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 1.828865] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
[ 1.828920] ohci_hcd 0000:00:14.5: irq 18, io mem 0xd2504000
[ 1.888188] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.888200] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.888211] usb usb7: Product: OHCI Host Controller
[ 1.888220] usb usb7: Manufacturer: Linux 2.6.32-5-amd64 ohci_hcd
[ 1.888229] usb usb7: SerialNumber: 0000:00:14.5
[ 1.888477] usb usb7: configuration #1 chosen from 1 choice
[ 1.888593] hub 7-0:1.0: USB hub found
[ 1.888712] hub 7-0:1.0: 2 ports detected
[ 1.958900] usb 1-4: New USB device found, idVendor=0bda, idProduct=0158
[ 1.958916] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.958928] usb 1-4: Product: USB2.0-CRW
[ 1.958936] usb 1-4: Manufacturer: Generic
[ 1.958944] usb 1-4: SerialNumber: 20071114173400000
[ 1.959284] usb 1-4: configuration #1 chosen from 1 choice
[ 1.972523] Initializing USB Mass Storage driver...
[ 1.972523] scsi4 : SCSI emulation for USB Mass Storage devices
[ 1.972523] usbcore: registered new interface driver usb-storage
[ 1.972523] USB Mass Storage support registered.
[ 1.972523] usb-storage: device found at 2
[ 1.972523] usb-storage: waiting for device to settle before scanning
[ 2.072081] usb 2-2: new high speed USB device using ehci_hcd and address 2
[ 2.132085] ata4: softreset failed (device not ready)
[ 2.132197] ata4: applying SB600 PMP SRST workaround and retrying
[ 2.132239] ata3: softreset failed (device not ready)
[ 2.132339] ata3: applying SB600 PMP SRST workaround and retrying
[ 2.233825] usb 2-2: New USB device found, idVendor=064e, idProduct=a104
[ 2.233837] usb 2-2: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[ 2.233848] usb 2-2: Product: HP Webcam
[ 2.233855] usb 2-2: Manufacturer: SuYin
[ 2.233863] usb 2-2: SerialNumber: CN0314-S30C-MI07-VH-R03.00.00
[ 2.234204] usb 2-2: configuration #1 chosen from 1 choice
[ 2.296083] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.296161] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.296555] ata3.00: ATA-8: WDC WD2500BEVS-60UST0, 01.01A01, max UDMA/100
[ 2.296569] ata3.00: 488397168 sectors, multi 16: LBA48
[ 2.297243] ata3.00: configured for UDMA/100
[ 2.297663] scsi 2:0:0:0: Direct-Access ATA WDC WD2500BEVS-6 01.0 PQ: 0 ANSI: 5
[ 2.299775] ata4.00: ATAPI: HL-DT-ST DVDRAM GSA-T30L, GC04, max UDMA/100
[ 2.304543] ata4.00: configured for UDMA/100
[ 2.421745] scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T30L GC04 PQ: 0 ANSI: 5
[ 2.439490] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 2.439613] sd 2:0:0:0: [sda] Write Protect is off
[ 2.439620] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.439668] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.439981] sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 > sda4
[ 2.585652] sd 2:0:0:0: [sda] Attached SCSI disk
[ 2.608105] usb 6-1: new full speed USB device using ohci_hcd and address 2
[ 2.771015] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.771034] Uniform CD-ROM driver Revision: 3.20
[ 2.771501] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 2.777077] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 2.777166] sr 3:0:0:0: Attached scsi generic sg1 type 5
[ 2.790054] usb 6-1: New USB device found, idVendor=03f0, idProduct=171d
[ 2.790069] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.790080] usb 6-1: Product: HP Integrated Module
[ 2.790089] usb 6-1: Manufacturer: Broadcom Corp
[ 2.790416] usb 6-1: configuration #1 chosen from 1 choice
[ 2.928086] usb 7-1: new full speed USB device using ohci_hcd and address 2
[ 3.092597] usb 7-1: New USB device found, idVendor=08ff, idProduct=1600
[ 3.092611] usb 7-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 3.092623] usb 7-1: Product: Fingerprint Sensor
[ 3.093035] usb 7-1: configuration #1 chosen from 1 choice
[ 3.228084] usb 7-2: new full speed USB device using ohci_hcd and address 3
[ 3.394937] usb 7-2: New USB device found, idVendor=056a, idProduct=0093
[ 3.394952] usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.394964] usb 7-2: Product: ISD-V4
[ 3.394972] usb 7-2: Manufacturer: Tablet
[ 3.395341] usb 7-2: configuration #1 chosen from 1 choice
[ 3.408507] usbcore: registered new interface driver hiddev
[ 3.408974] usbcore: registered new interface driver usbhid
[ 3.408980] usbhid: v2.6:USB HID core driver
[ 3.642051] kjournald starting. Commit interval 5 seconds
[ 3.642091] EXT3-fs: mounted filesystem with ordered data mode.
[ 5.806734] udev: starting version 160
[ 6.196543] processor LNXCPU:00: registered as cooling_device0
[ 6.196543] ACPI: AC Adapter [ACAD] (on-line)
[ 6.196543] processor LNXCPU:01: registered as cooling_device1
[ 6.228544] ACPI: WMI: Mapper loaded
[ 6.673956] Disabling lock debugging due to kernel taint
[ 6.688582] ndiswrapper version 1.56 loaded (smp=yes, preempt=no)
[ 6.699108] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 6.699228] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 6.715954] ACPI: Battery Slot [BAT0] (battery present)
[ 6.716134] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[ 6.716166] ACPI: Power Button [PWRB]
[ 6.716424] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4
[ 6.716424] ACPI: Sleep Button [SLPB]
[ 6.716571] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input5
[ 6.718209] ACPI: Lid Switch [LID]
[ 6.718739] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[ 6.718739] ACPI: Power Button [PWRF]
[ 6.797069] EDAC MC: Ver: 2.1.0 Aug 12 2010
[ 6.968889] usb-storage: device scan complete
[ 6.970911] scsi 4:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
[ 6.972702] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 6.975702] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 7.086211] EDAC amd64_edac: Ver: 3.2.0 Aug 12 2010
[ 7.086397] EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3).
[ 7.086451] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 7.086458] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 7.086464] (Note that use of the override may cause unknown side effects.)
[ 7.086493] amd64_edac: probe of 0000:00:18.2 failed with error -22
[ 7.093761] acpi device:03: registered as cooling_device2
[ 7.094921] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input7
[ 7.095147] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 7.148044] ndiswrapper (link_pe_images:565): fixing KI_USER_SHARED_DATA address in the driver
[ 7.152048] ndiswrapper: driver bcmwl5 (Broadcom,07/11/2007, 4.150.29.0) loaded
[ 7.152746] ndiswrapper 0000:08:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 7.152746] ndiswrapper 0000:08:00.0: setting latency timer to 64
[ 7.170709] ndiswrapper: using IRQ 17
[ 7.172540] shpchp 0000:00:01.0: HPC vendor_id 1022 device_id 9602 ss_vid 0 ss_did 0
[ 7.172540] shpchp 0000:00:01.0: Cannot reserve MMIO region
[ 7.346274] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x180b1, caps: 0xa04711/0xa00000/0x0
[ 7.390127] wlan0: ethernet device 00:21:00:31:4c:8c using NDIS driver: bcmwl5, version: 0x4961d00, NDIS version: 0x501, vendor: 'NDIS Network Adapter', 14E4:4328.5.conf
[ 7.390354] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK
[ 7.399476] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 7.400046] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 7.421299] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
[ 7.422322] usbcore: registered new interface driver ndiswrapper
[ 8.043032] Linux video capture interface: v2.00
[ 8.046367] input: Wacom ISDv4 93 as /devices/pci0000:00/0000:00:14.5/usb7/7-2/7-2:1.0/input/input9
[ 8.049260] input: Wacom ISDv4 93 as /devices/pci0000:00/0000:00:14.5/usb7/7-2/7-2:1.1/input/input10
[ 8.049593] usbcore: registered new interface driver wacom
[ 8.049606] wacom: v1.52:USB Wacom tablet driver
[ 8.083349] uvcvideo: Found UVC 1.00 device HP Webcam (064e:a104)
[ 8.098728] input: HP Webcam as /devices/pci0000:00/0000:00:13.2/usb2/2-2/2-2:1.0/input/input11
[ 8.099096] usbcore: registered new interface driver uvcvideo
[ 8.099109] USB Video Class driver (v0.1.0)
[ 8.460007] Bluetooth: Core ver 2.15
[ 8.460007] NET: Registered protocol family 31
[ 8.460007] Bluetooth: HCI device and connection manager initialized
[ 8.460007] Bluetooth: HCI socket layer initialized
[ 8.659226] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 8.659621] usbcore: registered new interface driver btusb
[ 10.058870] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 10.059041] HDA Intel 0000:00:14.2: setting latency timer to 64
[ 10.215457] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input12
[ 10.850017] Adding 3068344k swap on /dev/sda8. Priority:-1 extents:1 across:3068344k
[ 11.159419] EXT3 FS on sda11, internal journal
[ 11.292047] loop: module loaded
[ 12.153297] kjournald starting. Commit interval 5 seconds
[ 12.153704] EXT3 FS on sda5, internal journal
[ 12.153727] EXT3-fs: mounted filesystem with ordered data mode.
[ 13.715383] fuse init (API version 7.13)
[ 15.316042] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[ 15.316042] vboxdrv: Warning: 2.6.31+ kernel detected. Most likely the hardware performance
[ 15.316042] vboxdrv: counter framework which can generate NMIs is active. You have to prevent
[ 15.316042] vboxdrv: the usage of hardware performance counters by
[ 15.316042] vboxdrv: echo 2 > /proc/sys/kernel/perf_counter_paranoid
[ 15.316136] vboxdrv: Found 2 processor cores.
[ 15.316429] VBoxDrv: dbg - g_abExecMemory=ffffffffa047c6c0
[ 15.316515] vboxdrv: fAsync=1 offMin=0xc5ebb2e offMax=0xc5ebb2e
[ 15.317908] vboxdrv: TSC mode is 'asynchronous', kernel timer mode is 'normal'.
[ 15.317918] vboxdrv: Successfully loaded version 3.2.6_OSE (interface 0x00140001).
[ 16.033780] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input13
[ 20.172012] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 20.175828] r8169: eth0: link up
[ 20.174781] r8169: eth0: link up
[ 21.891646] lp: driver loaded but no devices found
[ 22.055076] ppdev: user-space parallel port driver
[ 22.568009] Bluetooth: L2CAP ver 2.14
[ 22.568009] Bluetooth: L2CAP socket layer initialized
[ 22.815861] Bluetooth: RFCOMM TTY layer initialized
[ 22.815884] Bluetooth: RFCOMM socket layer initialized
[ 22.815893] Bluetooth: RFCOMM ver 1.11
[ 23.052045] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 23.052045] Bluetooth: BNEP filters: protocol multicast
[ 23.151078] Bridge firewalling registered
[ 23.579330] Bluetooth: SCO (Voice Link) ver 0.6
[ 23.579342] Bluetooth: SCO socket layer initialized
[ 26.780175] pci 0000:01:05.0: power state changed by ACPI to D0
[ 26.780196] pci 0000:01:05.0: power state changed by ACPI to D0
[ 26.780219] pci 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 26.812511] powernow-k8: Found 1 AMD Turion(tm) X2 Ultra Dual-Core Mobile ZM-80 processors (2 cpu cores) (version 2.20.00)
[ 26.812511] powernow-k8: 0 : pstate 0 (2100 MHz)
[ 26.812511] powernow-k8: 1 : pstate 1 (1050 MHz)
[ 26.812511] powernow-k8: 2 : pstate 2 (525 MHz)
[ 26.999075] [drm] Initialized drm 1.1.0 20060810
[ 27.147059] [drm] radeon kernel modesetting enabled.
[ 27.147206] radeon 0000:01:05.0: setting latency timer to 64
[ 27.152028] [drm] radeon: Initializing kernel modesetting.
[ 27.152028] [drm] register mmio base: 0xD2400000
[ 27.152028] [drm] register mmio size: 65536
[ 27.157270] ATOM BIOS: HP_Soyuz20
[ 27.157318] [drm] Clocks initialized !
[ 27.158837] [drm] Detected VRAM RAM=256M, BAR=256M
[ 27.158846] [drm] RAM width 32bits DDR
[ 27.159016] [TTM] Zone kernel: Available graphics memory: 1416406 kiB.
[ 27.159016] [drm] radeon: 256M of VRAM memory ready
[ 27.159016] [drm] radeon: 512M of GTT memory ready.
[ 27.159016] [drm] radeon: irq initialized.
[ 27.159016] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 27.159927] [drm] Loading RS780 Microcode
[ 27.159935] platform radeon_cp.0: firmware: requesting radeon/RS780_pfp.bin
[ 27.240460] platform radeon_cp.0: firmware: requesting radeon/RS780_me.bin
[ 27.362960] platform radeon_cp.0: firmware: requesting radeon/R600_rlc.bin
[ 27.464213] [drm] ring test succeeded in 0 usecs
[ 27.464833] [drm] radeon: ib pool ready.
[ 27.465301] [drm] ib test succeeded in 0 usecs
[ 27.465388] [drm] Enabling audio support
[ 27.467954] [drm] Default TV standard: NTSC
[ 27.468707] [drm] Radeon Display Connectors
[ 27.468712] [drm] Connector 0:
[ 27.468716] [drm] VGA
[ 27.468722] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[ 27.468727] [drm] Encoders:
[ 27.468730] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 27.468735] [drm] Connector 1:
[ 27.468738] [drm] DIN
[ 27.468740] [drm] Encoders:
[ 27.468744] [drm] TV1: INTERNAL_KLDSCP_DAC1
[ 27.468747] [drm] Connector 2:
[ 27.468750] [drm] LVDS
[ 27.468755] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[ 27.468759] [drm] Encoders:
[ 27.468762] [drm] LCD1: INTERNAL_KLDSCP_LVTMA
[ 27.636511] [drm] fb mappable at 0xC0141000
[ 27.636511] [drm] vram apper at 0xC0000000
[ 27.636511] [drm] size 4096000
[ 27.636511] [drm] fb depth is 24
[ 27.636511] [drm] pitch is 5120
[ 27.639553] Console: switching to colour frame buffer device 160x50
[ 27.639553] fb0: radeondrmfb frame buffer device
[ 27.639861] registered panic notifier
[ 27.639861] [drm] Initialized radeon 2.0.0 20080528 for 0000:01:05.0 on minor 0
[ 30.908040] eth0: no IPv6 routers present
[ 118.613232] CPU0 attaching NULL sched-domain.
[ 118.613232] CPU1 attaching NULL sched-domain.
[ 118.632598] CPU0 attaching sched-domain:
[ 118.632624] domain 0: span 0-1 level MC
[ 118.632646] groups: 0 1
[ 118.632690] CPU1 attaching sched-domain:
[ 118.632707] domain 0: span 0-1 level MC
[ 118.632725] groups: 1 0
[ 118.900882] CPU0 attaching NULL sched-domain.
[ 118.900929] CPU1 attaching NULL sched-domain.
[ 118.924584] CPU0 attaching sched-domain:
[ 118.924611] domain 0: span 0-1 level MC
[ 118.924632] groups: 0 1
[ 118.924677] CPU1 attaching sched-domain:
[ 118.924694] domain 0: span 0-1 level MC
[ 118.924711] groups: 1 0
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Xorg.0.log
Type: text/x-log
Size: 46867 bytes
Desc: not available
URL: <http://lists.x.org/archives/xorg-driver-ati/attachments/20100904/c0cce907/attachment-0001.bin>
More information about the xorg-driver-ati
mailing list