<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 TRANSITIONAL//EN"> <HTML> <HEAD> <META HTTP-EQUIV="Content-Type" CONTENT="text/html; CHARSET=UTF-8"> <META NAME="GENERATOR" CONTENT="GtkHTML/3.30.3"> </HEAD> <BODY> Hi , I m not seeing any events when I run evtest for the touch device ====================================== Input driver version is 1.0.1 Input device ID: bus 0x11 vendor 0x2 product 0x7 version 0x1b1 Input device name: "SynPS/2 Synaptics TouchPad" Supported events:   Event type 0 (Sync)   Event type 1 (Key)     Event code 272 (LeftBtn)     Event code 273 (RightBtn)     Event code 274 (MiddleBtn)     Event code 277 (ForwardBtn)     Event code 278 (BackBtn)     Event code 325 (ToolFinger)     Event code 330 (Touch)   Event type 3 (Absolute)     Event code 0 (X)       Value   2108       Min     1472       Max     5598       Resolution      67     Event code 1 (Y)       Value   3821       Min     1408       Max     4670       Resolution     111     Event code 24 (Pressure)       Value      0       Min        0       Max      255     Event code 28 (Tool Width)       Value      0       Min        0       Max        0 Testing ... (interrupt to exit) =========================================== even after VT switching to a TTY (using CNTL+ALT+F1). Any clues ? Thanks, Mugu On Wed, 2011-02-09 at 17:17 +0200, ext mugunthan wrote: <BLOCKQUOTE TYPE=CITE> I got it ... thanks a lot for your inputs ... I have just one more question when I m running the evtest  for a device .like this ====================================== Input driver version is 1.0.1 Input device ID: bus 0x11 vendor 0x2 product 0x7 version 0x1b1 Input device name: "SynPS/2 Synaptics TouchPad" Supported events:   Event type 0 (Sync)   Event type 1 (Key)     Event code 272 (LeftBtn)     Event code 273 (RightBtn)     Event code 274 (MiddleBtn)     Event code 277 (ForwardBtn)     Event code 278 (BackBtn)     Event code 325 (ToolFinger)     Event code 330 (Touch)   Event type 3 (Absolute)     Event code 0 (X)       Value   2108       Min     1472       Max     5598       Resolution      67     Event code 1 (Y)       Value   3821       Min     1408       Max     4670       Resolution     111     Event code 24 (Pressure)       Value      0       Min        0       Max      255     Event code 28 (Tool Width)       Value      0       Min        0       Max        0 Testing ... (interrupt to exit) =========================================== how could I specify evtest to run only for " Event code 330 " Thanks, Mugu On Wed, 2011-02-09 at 14:47 +0000, ext Daniel Stone wrote: <BLOCKQUOTE TYPE=CITE> <PRE> On Wed, Feb 09, 2011 at 04:30:54PM +0200, mugunthan wrote: > I already have the hardware. So I would like to test on that . > So I was wondering how to do that. I have no idea what you're actually asking. If you have hardware which you want to test on, then use the hardware. The text file I pointed you to has documentation which will let you capture a stream of events from the hardware and set up a test device which will replay those events at will (i.e. fake events). There are other ways to simulate input events but they aren't nearly as accurate as evtest. But you can look at xnee and xresponse (which are both widely used within MeeGo) to find out how they do it. </PRE> </BLOCKQUOTE> <PRE> _______________________________________________ <A HREF="mailto:xorg-devel@lists.x.org">xorg-devel@lists.x.org</A>: X.Org development Archives: <A HREF="http://lists.x.org/archives/xorg-devel">http://lists.x.org/archives/xorg-devel</A> Info: <A HREF="http://lists.x.org/mailman/listinfo/xorg-devel">http://lists.x.org/mailman/listinfo/xorg-devel</A> </PRE> </BLOCKQUOTE> </BODY> </HTML>